Our pass rate is high to 98.9% and the similarity percentage between our 640-878 study guide and real exam is 90% based on our seven-year educating experience. Do you want achievements in the Cisco 640-878 exam in just one try? I am currently studying for the Cisco 640-878 exam. Latest Cisco 640-878 Test exam practice questions and answers, Try Cisco 640-878 Brain Dumps First.


2026 New 640-878 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/640-878/

Q1. Refer to the partial Cisco IOS router configuration exhibit. 

***Exhibit is Missing*** 

Which statement is true? 

A. To support the subinterface configuration, the Fa0/0 main interface configuration is missing the encapsulation dot1Q command. 

B. The Fa0/0 interface/subinterfaces are configured correctly to operate as a trunk port to provide inter-VLAN routing for three VLANs (VLANs 1, 2, and 3). 

C. To provide inter-VLAN routing, the Fa0/0.1, Fa0/0.2 and Fa0/0.3 subinterface configuration is missing the encapsulation dot1Q vlan-id subinterface configuration command. 

D. To provide inter-VLAN routing, the router is missing the vlan 1, vlan 2, and vlan 3 global configuration commands. 

Answer: C 

Q2. Your switch network has been configured to support multiple VLANs. In order for the users on one VLAN to communicate with users on another VLAN, which additional configuration is required? 

A. Enable a routing protocol like EIGRP on a router or on a Layer 3 capable switch. 

B. Enable inter-VLAN routing on a router or on a Layer 3 capable switch. 

C. Enable a switch virtual interface on the router, using the interface vlan global configuration command. 

D. Enable a switch virtual interface on the switch, using the encapsulation dot1q 

E. subinterface configuration command 

F. Enable IP routing on a Layer 2 switch. 

Answer: B 

Q3. Within an MPLS domain, which table is used by the label switch routers to make forwarding decisions when a labeled packet is received? 

A. FIB 

B. RIB 

C. LFIB 

D. LIB 

E. CEF 

Answer: C 

Q4. Which IP addresses are matched by the permit 192.168.80.64 0.0.0.15 access-list entry? 

A. 192.168.80.64 to 192.168.80.255 

B. 192.168.80.64 to 192.168.80.96 

C. 192.168.80.64 to 192.168.80.95 

D. 192.168.80.64 to 192.168.80.80 

E. 192.168.80.64 to 192.168.80.79 

Answer: E 

Q5. Refer to the exhibit. 

***Exhibit is Missing*** 

The access list has been configured on the Gi0/0/0/0 interface in the inbound direction. Which four packets that are sourced from 10.1.1.1 TCP port 1060, if they are routed to the Gi0/0/0/0 interface, will be permitted? (Choose four) 

A. destination IP address: 192.168.15.37, destination TCP port: 8080 

B. destination IP address: 192.168.15.41, destination TCP port: 8080 

C. destination IP address: 192.168.15.49, destination TCP port: 8080 

D. destination IP address: 192.168.15.36, destination TCP port: 80 

E. destination IP address: 192.168.15.46, destination TCP port: 80 

F. destination IP address: 192.168.15.49, destination TCP port: 80 

Answer: C,D,E,F 

Q6. On Cisco routers, the address-family configuration command in BGP configuration mode is used to enable which BGP feature? 

A. BGP route policy 

B. multiprotocol BGP 

C. BGP policy accounting 

D. BGP communities 

Answer: B 

Q7. Which three statements about OSPFv2 or OSPFv3 authentication are true? (Choose three.) 

A. On Cisco IOS XR platforms, OSPFv3 authentication can be configured at the OSPF routing process, area, or interface level. 

B. OSPF authentication on Cisco IOS and IOS XE platforms can be configured per area or per interface. 

C. On Cisco IOS and IOS XE and IOS XR platforms, the authentication key can only be configured per interface. 

D. OSPFv3 uses IPsec for authentication and encryption. 

E. On Cisco IOS XR platforms, the OSPF authentication that is configured for the area overrides the authentication that is configured for the interface. 

F. On Cisco IOS and IOS XE platforms, the two OSPFv2 authentication methods that are supported are MD5 and SHA1. 

Answer: A,B,D 

Q8. Which Cisco platform runs the Cisco IOS XE operating system? 

A. Cisco ASR9K 

B. Cisco CRS 

C. Cisco 12000 GSR 

D. Cisco ASR1K 

E. Cisco ME 3400 

F. Cisco ISR-G2 

Answer: D 

Q9. When configuring an ACL entry, which network and wildcard mask matches only IP addresses 

10.8.144.0 to 10.8.151.255? 

A. 10.8.144.0 0.0.3.255 

B. 10.8.144.0 0.0.7.255 

C. 10.8.144.0 0.0.15.255 

D. 10.8.144.0 0.0.252.255 

E. 10.8.144.0 0.0.248.255 

F. 10.8.144.0 0.0.240.255 

Answer: B