Up to the minute 642-999 Exam Study Guides With New Update Exam Questions

Q1. Which BIOS setting is required for a VMware ESXi 5.0 host to support Cisco VM-FEX universal pasthrough mode? 

A. VT for Directed IO 

B. ACPI 10 Support 

C. VEMDPA Agent 

D. Execute Disabled Bit 

E. Processor C State 

View Answer

Q2. How does a dynamic vNIC get allocated? 

A. Dynamic vNICs are assigned to VMs in VMware vCenter. 

B. Dynamic vNICs can only be bound to the service profile through an updating template. 

C. Dynamic vNICs are bound directly to a service profile. 

D. Dynamic vNICs are assigned by binding a port profile to the service profile. 

View Answer

Q3. Your systems engineer has determined all of the firmware versions that the server operating system supports. What steps are taken on Cisco UCS to avoid manual firmware upgrades on the blade servers? 

A. Use Cisco UCS Manager firmware management to upgrade all Cisco UCS blade servers to the same target firmware versions. 

B. Configure host firmware package and management firmware package policies and associate the firmware policies with the service profiles. 

C. Create a BIOS policy and define the host firmware package and management firmware package. 

D. Configure host firmware package and management firmware package policies and associate the firmware policies with the server pools. 

View Answer

Q4. Which of the following is true concerning the Global Chassis Discovery policy configuration on the Cisco Unified Computing System Manager when using Cisco Unified Computing System 22XX I/O modules with Cisco UCS 62XX Fabric Interconnects? 

A. The link grouping preference should be set to discrete mode when the number of northbound links are not a power of 2. 

B. Set the action policy-count higher than the actual number of uplinks; otherwise, the Cisco Unified Computing System servers will not be discovered. 

C. For Cisco Unified Computing System implementations that mix I/O modules with different numbers of links, it is best to manually reacknowledge the chassis in order to use all available links. 

D. Automatic reacknowledgement due to chassis discovery is never disruptive. 

View Answer

Q5. Which options are valid port types when configuring fixed 10-Gb LAN interfaces on the Cisco UCS 6200 Series Fabric Interconnects? (Choose three.) 

A. monitoring port 

B. server port 

C. uplink Ethernet port 

D. FEX port 

E. Fibre Channel storage port 

View Answer

Q6. You have a Cisco UCS B200 M2 server configured with 12 4-GB DDR3 1333-MHz dual-voltage memory DIMMs. You learned that the server memory speed is running at 1066 MHz instead. How can you configure the server to run at maximum memory speed? 

A. You cannot configure memory speed of 1333 MHz. The maximum memory speed of a Cisco UCS B200 M2 server with 12 4-GB DIMM is 1066 MHz. 

B. Memory speed of the ESX host is configurable on VMware vCenter. 

C. Create a BIOS policy. In the RAS Memory BIOS settings, select Performance Mode for LV DDR Mode. 

D. On the CIMC of the Cisco UCS B200 M2, select 1333 MHz in the Memory Speed option. 

View Answer

Q7. What is true statement concerning port personalities on the Cisco Unified Computing System 62XX Fabric Interconnect? 

A. Fibre Channel uplink ports must operate in Fibre Channel switching mode. 

B. The fabric interconnects use native FCoE storage ports to directly attach to the SAN infrastructure. 

C. By default, all Fibre Channel ports are unconfigured. 

D. The Fibre Channel uplink ports do not support VSAN trunking and Fibre Channel port channels. 

E. The Fibre Channel storage ports support VSAN trunking and Fibre Channel port channels. 

View Answer

Q8. Which two options are valid modes for VM-FEX in a Cisco UCS Manager port profile? (Choose two.) 

A. transparent 

B. bypass 

C. standard 

D. advanced 

E. high-performance 

F. low-pass 

View Answer

Q9. Which two VMware features will not allow an adapter to transition from Cisco VM-FEX standard mode to universal passthrough mode? (Choose two.) 

A. VM Snapshot 

B. Volume Shadow Copy 

C. Storage vMotion 

D. HA 

E. Resource Reservations 

View Answer

Q10. What are the default settings of the Cisco IMCCIMC NIC properties on a standalone Cisco UCS C-Series server? 

A. 'Shared LOM' NIC mode with 'Active-active' NIC redundancy and DHCP enabled 

B. 'Shared LOM' NIC mode with 'Active-standby' NIC redundancy and DHCP enabled 

C. 'Dedicated' NIC mode with 'Active-standby' NIC redundancy DHCP disabled 

D. 'Dedicated' NIC mode with 'None' NIC redundancy and DHCP enabled 

E. 'Cisco Card' NIC mode with 'Active-active' NIC redundancy and DHCP enabled 

View Answer