Want to know Exambible 642-999 Exam practice test features? Want to lear more about Cisco Implementing Cisco Data Center Unified Computing (DCUCI) certification experience? Study Refined Cisco 642-999 answers to Latest 642-999 questions at Exambible. Gat a success with an absolute guarantee to pass Cisco 642-999 (Implementing Cisco Data Center Unified Computing (DCUCI)) test on your first attempt.


2026 New 642-999 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/642-999/

Q1. Which three options are true regarding port profiles in Cisco UCS Manager? (Choose three.) 

A. Port profiles define operating-system kernel parameters. 

B. Port profiles are represented as a port group in vCenter. 

C. Port profiles can be used by more than one DVS. 

D. Port profile parameters are visible on vCenter. 

E. Port profile parameters can be modified from vCenter. 

F. Port profiles can be modified only from Cisco UCS Manager. 

Answer: BCF 

Q2. When you create a vHBA, what will you achieve by enabling persistent binding? 

A. This feature allows the binding of the SCSI targets to the vHBA, even across reboots. 

B. This feature allows the binding of the same WWPN from the pool to the vHBA, even across reboots. 

C. This feature allows the binding of the same WWNN from the pool to the vHBA, even across reboots. 

D. This feature allows the binding of the Fibre Channel uplink to the vHBA, even across reboots. 

Answer: A 

Q3. If there are four I/O module links from the Cisco Unified Computing System 5108 Blade Chassis to the Cisco Unified Computing System 6248UP Fabric Interconnect, which dynamic vNICs can be defined? 

A. 9 

B. 16 

C. 24 

D. 48 

E. 54 

F. 112 

Answer: E 

Q4. Which virtual hardware version is required for a VM to enter the Cisco VM-FEX universal passthrough mode? 

A. Version 5 

B. Version 6 

C. Version 7 

D. Version 8 

E. Version 9 

Answer: D 

Q5. Which two are true with respect to the switching modes on the Cisco Unified Computing System 62XX Fabric Interconnect? (Choose two.) 

A. End-host mode presents a link to a northbound uplink switch as a host trunk with loop detection that is provided by STP. 

B. For northbound traffic, server MAC addresses are statically pinned to an uplink; the return path is controlled by the unified fabric switches. 

C. A fabric interconnect port in Ethernet switching mode appears to the uplink switch as a host with many MAC addresses. 

D. Server-to-server traffic on a common VLAN are locally switched by the fabric interconnect and not the northbound switches. 

E. A MAC forwarding table is not used to forward traffic to the uplink switch. 

F. A MAC address forwarding table is maintained for server-to-server communications across VLANs. 

Answer: DE 

Q6. How does a Cisco Unified Computing System react when configured for disjoint Layer 2 domains? 

A. Automatic pinning is disabled; VLAN membership must be statically pinned to the uplink ports. 

B. VLANs must be divided between the fabric interconnects using PIN groups. 

C. The VLAN traffic for a disjoint network can only travel along an uplink that is specifically assigned to this VLAN and is selectively excluded from all other uplinks. 

D. When you configure disjoint Layer 2 networks, you must assign VLANs to uplink interfaces. 

Answer: C 

Q7. Which ports can access the Cisco IMC if you select Shared LOM NIC mode in the Cisco IMC Configuration Utility for a Cisco UCS C-Series server? 

A. the ports on an installed Cisco network adapter card 

B. the two 1-Gb Ethernet ports 

C. the two 10/100 management ports 

D. the two 10/100 management ports, but each port has a default setting 

Answer: B 

Q8. Your systems engineer has determined all of the firmware versions that the server operating system supports. What steps are taken on Cisco UCS to avoid manual firmware upgrades on the blade servers? 

A. Use Cisco UCS Manager firmware management to upgrade all Cisco UCS blade servers to the same target firmware versions. 

B. Configure host firmware package and management firmware package policies and associate the firmware policies with the service profiles. 

C. Create a BIOS policy and define the host firmware package and management firmware package. 

D. Configure host firmware package and management firmware package policies and associate the firmware policies with the server pools. 

Answer: B 

Q9. Which of the following is true with respect to hardware failover or NIC teaming within a Cisco Unified Computing System? 

A. Hardware failover is specified by the operating system. 

B. An uplink failure when using automatic pinning requires that hardware failover for the server vNIC be disabled. 

C. NIC teaming is controlled by the vNIC. 

D. The hardware failover option that is available for Ethernet does not affect Fibre Channel traffic. 

Answer: D 

Q10. In which situation would you be required to change a Cisco UCS system from end-host mode to switching mode? 

A. Design requirements call for the use of fabric failover. 

B. Fabric interconnect is connecting to disjoint Layer 2 networks upstream. 

C. HSRP routers are directly connected to the fabric interconnect. 

D. Upstream Cisco Nexus 5000 is configured for vPC. 

Answer: C