The Secret of Cisco 648-238 braindumps

Q1. Which Cisco IP Video Surveillance camera model is vandal-resistant, ruggedized, and allows for deployment outdoors in difficult environments with high or low temperatures, moisture, or dust? 

A. CIVS-IPC-2611 

B. CIVS-IPC-2621V 

C. CIVS-IPC-2630V 

D. CIVS-IPC-5010 

View Answer

Q2. Which option lists video resolutions in order from lowest to highest (by pixel count)? 

A. D1, HD, QCIF, CIF 

B. D1, CIF, 4CIF, HD 

C. QCIF, CIF, D1, HD 

D. QCIF, D1, CIF, HD 

View Answer

Q3. Refer to the exhibit. 

You have installed a Cisco 4500E IP camera to monitor the area of interest near the center of an outdoor courtyard area 24 hours a day. 

Which three actions help to focus in on the area of interest and improve overall image quality? (Choose three.) 

A. Use a wider angle lens to increase field of view. 

B. Enable Day/Night mode on the camera. 

C. Reposition the camera to minimize exposure of the sky. 

D. Avoid placing the camera near trees and other objects that could obstruct the view. 

E. Enable PTZ functionality to focus on the area of interest. 

View Answer

Q4. As the system administrator, you have been asked to immediately delete cameras (and recordings) in Cisco VSM that are located at a building that was recently vacated by your company. Two days later, the night shift operator reports that although live video is unavailable, archived video from the vacated building is viewable. 

What must you do to purge the video archives? 

A. Wait until the retain recording timers expire, and then the archived video is purged automatically. 

B. Select the camera(s) in Cisco VSOM - Cameras and choose Full Delete. 

C. Move the soft-deleted cameras to a restricted location that is accessible only to system admins. 

D. Blacklist the camera(s) so that they no longer show up in Cisco VSM. 

View Answer

Q5. What does it mean when the video from a camera is black and white, but otherwise the picture is clear? 

A. The IR cut filter is in place 

B. The camera is not streaming the color data 

C. The camera has switched to night mode 

D. The camera is not getting enough power 

View Answer

Q6. Which statement about virtualization support for Cisco VSM version 7.0.0 is true? 

A. Cisco VSM 7 can be installed on any hypervisor, such as VMware vSphere, Microsoft Hyper-V, and Citrix XenServer 

B. Cisco VSM 7 OVA can be deployed and ready to use right away, without additional configuration steps. 

C. When using internal storage of Cisco UCS C-Series server for storing media repositories, external storage (such as SAN arrays) cannot be used. 

D. Each Cisco UCS B- or C-Series server can run several instances of Cisco VSM VM at the same time, as long as the resources of the server are sufficient. 

View Answer

Q7. What are the different view options in SASD? 

A. Alert Centric view, Map Centric view, Camera Centric view, Video Centric view 

B. Map Centric view, Camera Centric view, Alarm Centric view 

C. Map Centric view, Camera Centric view, Alarm Centric view, Event Centric view 

D. SASD views are fully customizable and as such there is no predefined viewing option. 

View Answer

Q8. Refer to the exhibit. 

Cisco VSOM, Cisco VSMS servers, and IP cameras in the shown Cisco VSM deployment are utilizing default NTP behavior to ensure that time settings are synchronized across all devices. 

What is the IP address of the pointed-to NTP server for the device with IP address 172.168.1.101? 

A. 10.0.0.10 

B. 172.168.1.10 

C. 172.168.1.101 

D. 192.168.1.101 

View Answer

Q9. Refer to the exhibit. 

Cameras and a Cisco VSM server are connected to a Layer 2 switch. 

Which three steps will allow the Cisco VSM servers to see video traffic from the two IP cameras? (Choose three.) 

A. GigE 0/10 should be configured to accept traffic from all VLANs using the #switchport mode access vlan all command. 

B. GigE 0/10 should be configured to dynamic mode using the #switchport mode dynamic desirable command. 

C. Implement "router-on-a-stick". 

D. Implement inter-VLAN routing. 

E. The link between GigE 0/5 and FE 1/1 should be configured as a trunk port. 

View Answer

Q10. Per Cisco best practices, how should you bulk upgrade the firmware of the multiple Cisco IP cameras that are deployed in a Cisco VSM system? 

A. via the web interface of each camera only 

B. via Cisco VSOM - System Settings - System 

C. via Cisco VSMC - Maintenance - Server Upgrade 

D. via Cisco VSMC - Maintenance - Manage Drivers 

View Answer