It is impossible to pass Cisco 648-238 exam without any help in the short term. Come to Pass4sure soon and find the most advanced, correct and guaranteed Cisco 648-238 practice questions. You will get a surprising result by our Updated Implementing Cisco Connected Physical Security 1 Exam practice guides.


2026 New 648-238 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/648-238/

Q1. How should you upgrade the firmware of the Cisco IP cameras deployed in a VSM system? 

A. Via the web interface of each camera only 

B. Via the VSMC page only 

C. Via the web interface of each camera and the VSMC page 

D. Via the Batch Admin tool 

Answer: B 

Q2. Acme Company has two office buildings and has deployed Cisco Video Surveillance at this campus. A security guard who usually monitors surveillance video in Building A was asked to cover a colleague's shift in Building B. The operator successfully logs into Cisco SASD using his credentials and sees cameras in Building A, but is unable to view cameras in Building B. 

What is causing this issue? 

A. The user belongs to the system-defined "operator" role, which does not have sufficient permissions to view cameras in Building B. 

B. The user logged into the media server A instead of media server B. 

C. The user does not have an account on media server B. 

D. The user does not belong to the user group for Building B. 

E. The user does not have a compatible version of Cisco SASD and should use Operations Manager instead. 

Answer: D 

Q3. By default, when the IP address of a VSM server is typed into a web browser, the VSMC page appears. What needs to be done in order to change the default web page to the VSOM login page instead? 

A. Uninstall VSMC from the server. VSOM and VSMC should not be colocated on the same server 

B. Download VSOM from VSMC, and install it locally 

C. Under the Operations Manager menu in VSMC, set the default home page to VSOM instead of VSMC 

D. Under the Operations Manager menu in VSMC, enter the IP address for the VSOM page 

Answer: C 

Q4. Refer to the exhibit. 

Cisco VSOM, Cisco VSMS servers, and IP cameras in the shown Cisco VSM deployment are utilizing default NTP behavior to ensure that time settings are synchronized across all devices. 

What is the IP address of the pointed-to NTP server for the device with IP address 172.168.1.101? 

A. 10.0.0.10 

B. 172.168.1.10 

C. 172.168.1.101 

D. 192.168.1.101 

Answer: B 

Q5. Refer to the exhibit. 

Which Cisco IOS switch command will provide information such as the IP camera model and firmware, connected switch port, IP address, and PoE power consumption? 

A. switch# show power inline 

B. switch# show ip cameras 

C. switch# show interface DeviceID 

D. switch# show cdp neighbors detail 

Answer: D 

Q6. Which two statements about differences between HD or full HD and megapixel cameras are true? (Choose two.) 

A. Aspect ratio of full HD and megapixel cameras is the same. 

B. Resolution of full HD cameras is known, whereas megapixel cameras can vary. 

C. Megapixel cameras generally have higher frame rate than full HD cameras. 

D. Megapixel camera resolutions are common among different camera vendors. 

E. Megapixel cameras can have higher resolution than full HD cameras. 

Answer: B,E 

Q7. In Cisco VSM 6.3.2, for which of the following does a license NOT need to be ordered? 

A. License for Virtual Matrix clients. 

B. License for the primary and secondary (if available and utilized) video streams on third-party (non-Cisco) IP cameras. 

C. Licenses for the primary and secondary (if used) video streams on Cisco IP Surveillance cameras. 

D. Licenses need to be ordered for Virtual Matrix Client, primary and secondary (if available and used) videos streams on third-party cameras, and primary and secondary (if used) video streams on Cisco IP cameras. 

Answer: D 

Q8. Refer to the exhibit. 

An operator is trying to set a lower video stream quality for a newly installed camera in the system. However, the video quality slider is grayed out and is not available. 

What is causing this issue? 

A. The operator does not have sufficient privileges to configure video stream properties. 

B. The camera only supports PAL settings, while the operator belongs to other location using NTSC standard only. 

C. The operator needs to ask an admin to log in and perform the changes to video quality settings. 

D. The operator should use a custom template. 

E. Camera is offline. 

Answer: D 

Q9. Which of the following must be considered when calculating storage and retention on a Cisco Physical Security MSP server? 

A. Number of cameras, frame rates, camera distances, and record on motion requirements 

B. Number of cameras, frame rates, and server locations 

C. Number of cameras, frame rates, compression types, and record on motion requirements 

D. Number of cameras, camera distances, server locations, and compression types 

Answer: C 

Q10. Per Cisco best practices, how should you bulk upgrade the firmware of the multiple Cisco IP cameras that are deployed in a Cisco VSM system? 

A. via the web interface of each camera only 

B. via Cisco VSOM - System Settings - System 

C. via Cisco VSMC - Maintenance - Server Upgrade 

D. via Cisco VSMC - Maintenance - Manage Drivers 

Answer: B