It is impossible to pass Cisco 648-247 exam without any help in the short term. Come to Examcollection soon and find the most advanced, correct and guaranteed Cisco 648-247 practice questions. You will get a surprising result by our Updated Implementing Cisco Connected Physical Security 2 Exam practice guides.


2026 New 648-247 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/648-247/

Q1. In Cisco PAM, how do you configure items such as doors, events, and reports?

A. via a web browser and logging into the Cisco PAM Server Administration web page

B. by using the Cisco PAM Java Client

C. Cisco PAM is configured using Cisco VSOM

D. by using the Cisco PAM EDI Studio application

Answer: B

Q2. You just received a new Cisco PAM appliance from Cisco. After unpacking the new server and plugging it into the network, how does the new Cisco PAM appliance get an IP address upon being powered on for the first time?

A. Cisco PAM will request an IP address via DHCP.

B. Cisco PAM will first request an IP address via DHCP. If Cisco PAM does not receive a DHCP response, it will assign itself an IP address of 192.168.1.2.

C. Cisco PAM is statically configured with an IP address of 10.1.1.2.

D. Cisco PAM is statically configured with an IP address of 192.168.1.2.

Answer: D

Q3. A deployment uses the same template for 100 doors. Five of these doors have an extra sensor and use supervised inputs instead of unsupervised inputs. In the near future, these doors will be replaced and will follow the same template as the other 95 doors. Which of the following is the best method to configure these 5 doors?

A. Create a new door template for these 5 doors. When the doors are replaced, delete the door template and reconfigure the door.

B. Use the same template for all 100 doors. When the door is replaced, it will already be configured with the correct template.

C. Use the same template for all 100 doors. Add the extra sensor to the door manually and override the template's settings for supervised and unsupervised input. When the door is replaced, remove the extra device and set the input back to default.

D. Create a new door template for these 5 doors. When the doors are replaced, be sure to use a supervised door position switch and terminate the spare sensor leads.

Answer: C

Q4. How should NTP be implemented in a Cisco Physical Access Control Gateway design?

A. NTP is not required.

B. NTP should be configured for the Cisco PAM Server only.

C. NTP should be configured for Cisco Physical Access Control Gateways only.

D. NTP should be configured on Cisco PAM Servers and gateways.

Answer: D

Q5. Refer to the exhibit.

One or more expansion modules is connected to the Cisco Access Gateway via a CAN bus. How should the CAN bus wires be connected after the last module in the chain?

A. The CAN bus wires should be looped back to the Cisco Access Gateway.

B. The CAN bus wires should be twisted together and tucked away.

C. The CAN bus wires should be plugged into a Layer 2 Ethernet switch.

D. The CAN bus wires should be terminated with a high-impedance resistor.

Answer: D

Q6. The primary Cisco PAM Server in a high-availability deployment is licensed for 128 modules, Badge Designer, and EDI integration. Which license(s) needs to be configured for the secondary Cisco PAM Server in this high-availability deployment?

A. No additional licenses are needed as long as the hardware and software versions are identical between the primary and secondary Cisco PAM Servers.

B. The secondary Cisco PAM Server needs the high-availability license only.

C. The secondary Cisco PAM Server needs the high-availability license in addition to the same feature licenses: 128 modules license, Badge Designer license, and EDI integration license.

D. None of the above—high availability is not currently available in Cisco PAM.

Answer: B

Q7. By default, entities in Cisco PAM can only be disabled, not deleted. How do you delete an entity?

A. There is no delete function. Once an entity is created, it cannot be deleted.

B. Log in as Administrator and disable the item. When you log out, it will be deleted.

C. Under Settings, enable deletion of items that normally can only be disabled. Disable the entity, then delete the entity.

D. Under Preferences, allow items that are disabled to be automatically deleted.

Answer: C

Q8. How can Cisco Physical Access Control (Cisco PAC) modules directly interface with fire alarm systems for door release function?

A. Cisco PAC modules should not directly interface with firm alarm systems for door release functions.

B. Cisco PAC modules can directly interface with fire alarm systems for door release functions via the CAN bus.

C. Cisco PAC modules can directly interface with fire alarm systems for door release functions via open APIs in the Cisco PAM.

D. Cisco PAC modules cannot directly interface with fire alarm systems for door release functions because the modules are digital and fire alarm systems are analog.

Answer: A

Q9. Your customer would like to deploy Cisco PAM in a highly-available, redundant system configuration. Cisco PAM Server A will be the primary server, and Server B is the secondary, backup server. Which of the following network configurations will accomplish this?

A. Option A

B. Option B

C. Option C

D. Option D

Answer: B

Q10. How would you back up the system configuration in Cisco PAM?

A. via the Cisco PAM Java Client

B. via the Cisco PAM Server Administration Web GUI

C. via the Cisco Access Gateway

D. you cannot back up the configuration

Answer: B