we provide Download Cisco 648-247 exam answers which are the best for clearing 648-247 test, and to get certified by Cisco Implementing Cisco Connected Physical Security 2 Exam. The 648-247 Questions & Answers covers all the knowledge points of the real 648-247 exam. Crack your Cisco 648-247 Exam with latest dumps, guaranteed!


2026 New 648-247 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/648-247/

Q1. Does the Cisco Physical Access Control Gateway have the ability to power other devices?

A. Yes, the gateway has a total of 650 milliamperes (ma) of available power for readers, locks, and other devices.

B. Yes, the gateway can power one reader, one lock, and one additional module.

C. Yes, the gateway uses the Eth1 port to pass PoE.

D. No, the gateway cannot power any other devices.

Answer: A

Q2. By default, entities in Cisco PAM can only be disabled, not deleted. How do you delete an entity?

A. There is no delete function. Once an entity is created, it cannot be deleted.

B. Log in as Administrator and disable the item. When you log out, it will be deleted.

C. Under Settings, enable deletion of items that normally can only be disabled. Disable the entity, then delete the entity.

D. Under Preferences, allow items that are disabled to be automatically deleted.

Answer: C

Q3. How should NTP be implemented in a Cisco Physical Access Control Gateway design?

A. NTP is not required.

B. NTP should be configured for the Cisco PAM Server only.

C. NTP should be configured for Cisco Physical Access Control Gateways only.

D. NTP should be configured on Cisco PAM Servers and gateways.

Answer: D

Q4. In Cisco PAM 1.3.2, what is the maximum size of a database backup file?

A. 100 MB

B. 1 GB

C. 2 GB

D. 4 GB

E. the backup file is limited only by available hard drive space

Answer: B

Q5. A deployment uses the same template for 100 doors. Five of these doors have an extra sensor and use supervised inputs instead of unsupervised inputs. In the near future, these doors will be replaced and will follow the same template as the other 95 doors. Which of the following is the best method to configure these 5 doors?

A. Create a new door template for these 5 doors. When the doors are replaced, delete the door template and reconfigure the door.

B. Use the same template for all 100 doors. When the door is replaced, it will already be configured with the correct template.

C. Use the same template for all 100 doors. Add the extra sensor to the door manually and override the template's settings for supervised and unsupervised input. When the door is replaced, remove the extra device and set the input back to default.

D. Create a new door template for these 5 doors. When the doors are replaced, be sure to use a supervised door position switch and terminate the spare sensor leads.

Answer: C

Q6. Assume a single badge entry in Cisco PAM for each user. For a single user, which two of the following statements are true regarding Cisco PAM, proximity card readers, and keypads? (Choose two.)

A. Keypads are not supported. Cisco PAM will work with Wiegand card readers only.

B. Cisco PAM can be used with Wiegand proximity card readers with integrated keypads.

C. Cisco PAM can be used with Wiegand proximity card readers only or Wiegand keypads only.

D. Cisco PAM can be used with both Wiegand proximity card readers and Wiegand keypads.

E. Cisco PAM can use non-Wiegand keypads.

Answer: BC

Q7. Which of the following best describes edge policies?

A. Edge policies are similar to global I/O except that they are configured on the server, reside on the Cisco Access Gateway, and can work even if the Cisco Access Gateway loses network connectivity with the Cisco PAM server.

B. Edge policies are similar to global I/O except that they get configured and executed on the gateway.

C. Edge policies are used to execute URLs to third-party systems. The gateway requires connectivity with the server to work.

D. Edge policies are similar to global I/O except that they get configured and executed on the gateway, and edge policies are used to execute URLs to third-party systems. The gateway requires connectivity with the server to work.

Answer: A

Q8. A gateway recently has been added to the network but does not appear in Cisco PAM. The gateway can be pinged from the user's laptop as well as the Cisco PAM server. Which of the following might cause this issue?

A. The gateway does not have the correct Cisco PAM Server IP address.

B. The gateway is not on the same network segment as the access control server.

C. The gateway has a different firmware version than the server.

D. The gateway does not have the correct Cisco PAM Server IP address, and the gateway has a different firmware version than the server.

Answer: D

Q9. Which of the following capabilities will cease to function if network connectivity is lost between the Cisco PAM Server and the Cisco Access Gateway?

A. global I/O

B. authenticating a valid badge that is presented to a reader that is connected to the Cisco Access Gateway

C. caching events such as an REX request or a valid card read

D. Global I/O, badge authentication, and caching of events will cease to function if network connectivity is lost between the Cisco PAM Server and Cisco Access Gateway

Answer: A

Q10. From which two places can you download the Cisco PAM client? (Choose two.)

A. the Cisco.com software download site

B. the "Setup" tab on the Cisco PAM Server Administration web page

C. the main login window of the Cisco PAM Server Administration web page

D. the "Downloads" tab on the Cisco PAM Server Administration web page

E. www.CiscoET.com

Answer: CD