Proper study guides for Renew Microsoft Installing and Configuring Windows Server 2012 certified begins with Microsoft mcp 70 410 preparation products which designed to deliver the Top Quality 70 410 study guide pdf questions by making you pass the 70 410 practice exam test at your first time. Try the free 70 410 practice exam demo right now.
2026 New 70-410 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/70-410/
P.S. Top Quality 70-410 torrent are available on Google Drive, GET MORE: https://drive.google.com/open?id=12Hnv9NReMM9UllL56hyQjMBaXTShJEqc
New Microsoft 70-410 Exam Dumps Collection (Question 7 - Question 16)
Question No: 7
Your network contains an Active Directory domain named contoso.com. You have a Group Policy object (GPO) named GP1 that is linked to the domain. GP1 contains a software restriction policy that blocks an application named App1.
You have a workgroup computer named Computer1 that runs Windows 8. A local Group Policy on Computer1 contains an application control policy that allows App1.
You join Computer1 to the domain.
You need to prevent App1 from running on Computer1. What should you do?
A. From Computer1, run gpupdate/force.
B. From Group Policy Management, add an application control policy to GP1.
C. From Group Policy Management, enable the Enforced option on GP1.
D. In the local Group Policy of Computer1, configure a software restriction policy.
Answer: B
Explanation:
AppLocker policies take precedence over policies generated by SRP on computers that are running an operating system that supports AppLocker.
AppLocker policies in the GPO are applied, and they supersede the policies generated by SRP in the GPO and local AppLocker policies or policies generated by SRP.
Question No: 8
You have a server named Server1 that runs Windows Server 2012 R2. You connect three new hard disks to Server1.
You need to create a storage space that contains the three disks.
The solution must meet the following requirements:
u2711 Provide fault tolerance if a single disk fails.
u2711 Maximize the amount of files that can be stored in the storage space.
What should you create?
A. A simple space
B. A spanned volume
C. A mirrored space
D. A parity space
Answer: D
Explanation:
:A. Stripes data across a set of pool disks, and is not resilient to any disk failures.
:B. A spanned volume is a dynamic volume consisting of disk space on more than one physical disk and not fault tolerant
:C. Fault tolerant but Not max space
:D. Fault tolerant and better space ratio
Parity spaces are designed for capacity efficiency and increased resiliency. Parity spaces are best suited for archival data and streaming media, such as music and videos.
Question No: 9
Your network contains a Windows Server 2012 R2 image named Server12.wim.Server12.wim contains the images shown in the following table.
You need to enable the Windows Server Migration Tools feature in the Windows Server 2012 R2 Datacenter image.
You want to achieve this goal by using the minimum amount of administrative effort. Which command should you run first?
A. dism.exe /image:c:Server12.wim /enable-feature /featurename:servermigration
B. dism.exe /mount-wim /wimfile:c:Server12.wim /index:4 /mountdir:c:mount
C. imagex.exe /capture c: c:Server12.wim "windows server 2012 r2 datacenter"
D. imagex.exe /apply c:Server12.wim 4 c:
Answer: B
Explanation:
This command will mount the image before making any changes. References:
http://technet.microsoft.com/en-us/library/cc749447(v=ws.10).aspx http://technet.microsoft.com/en-us/library/dd744382(v=ws.10).aspx
Question No: 10
You have a server named Server1 that runs a Server Core Installation of Windows Server 2012 R2 Datacenter.
You have a WIM file that contains the four images of Windows Server 2012 R2 as shown in the Images exhibit. (Click the Exhibit button.)
You review the installed features on Server1 as shown in the Features exhibit. (Click the Exhibit button.)
You need to install the Server Graphical Shell feature on Server1.
Which two possible sources can you use to achieve this goal? (Each correct answer presents a complete solution. Choose two.)
A. Index 1
B. Index 2
C. Index 3
D. Index 4
Answer: B,D
Explanation:
These images (since they are Full GUI, not CORE), contain the binaries necessary to install all GUI elements.
When you install Windows Server 2012 R2, you can choose between Server Core Installation and Server with a GUI. The u201cServer with a GUIu201d option is the Windows Server 2012 R2 equivalent of the Full installation option available in Windows Server 2008 R2. The u201cServer Core Installationu201d option reduces the space required on disk, the potential attack surface, and especially the servicing requirements, so we recommend that you choose the Server Core installation unless you have a particular need for the additional user interface elements and graphical management tools that are included in the u201cServer with a GUIu201d option. For this reason, the Server Core installation is now the default. Because you can freely switch between these options at any time later, one approach might be to initially install the Server with a GUI option, use the graphical tools to configure the server, and then later switch to the Server Core Installation option.
Reference: Windows Server Installation Options
Question No: 11
Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed.
Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4. Server1 is configured as shown in the following table.
You plan to schedule a complete backup of Server1 by using Windows Server Backup. You need to ensure that the state of VM1 is saved before the backup starts.
What should you configure?
A. NUMA topology
B. Resource control
C. resource metering
D. virtual Machine Chimney
E. The VLAN ID
F. Processor Compatibility
G. The startup order
H. Automatic Start Action
I. Integration Services
J. Port mirroring
K. Single-root I/O virtualization
Answer: I
Explanation:
The Integration Services settings on virtual machines include services such as operating system shutdown, time synchronization, data exchange, Heartbeat, and Backup (volume snapshot services). This snapshot will ensure that the state of VM1 is saved prior to backup.
References: http://msdn.microsoft.com/en-us/library/dd405549(v=vs.85).aspx Exam Ref 70-410, Installing and Configuring Windows Server 2012 R2, Chapter 3:
Configure Hyper-V, Objective 3.1: Create and Configure virtual machine settings, p.144
Question No: 12
Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. The domain contains two domain controllers named DC1 and DC2 that run Windows Server 2012 R2.
The domain contains a user named User1 and a global security group named Group1. You need to modify the SAM account name of Group1.
Which cmdlet should you run?
A. Add-AdPrincipalGroupMembership
B. Install-AddsDomainController
C. Install-WindowsFeature
D. Install-AddsDomain
E. Rename-AdObject
F. Set AdAccountControl
G. Set-AdGroup
H. Set-User
Answer: G
Question No: 13
Your network contains an Active Directory domain named adatum.com. The domain contains a member server named Host1. Host1 runs Windows Server 2012 R2 and has the Hyper-V server role installed.
Host1 hosts two virtual machines named VM5 and VM6. Both virtual machines connect to a virtual switch named Virtual1.
On VM5, you install a network monitoring application named Monitor1.
You need to capture all of the inbound and outbound traffic to VM6 by using Monitor1. Which two commands should you run from Windows PowerShell? (Each correct answer
presents part of the solution. Choose two.)
A. Get-VM u201cVM6 | Set-VMNetworkAdapter-IovWeight 1
B. Get-VM u201cVM5 I Set-VMNetworkAdapter -IovWeight 0
C. Get-VM u201cVM5 | Set-VMNetworkAdapter -PortMirroring Source
D. Get-VM u201cVM6 | Set-VMNetworkAdapter -AllowTeaming On
E. Get-VM u201cVM6 | Set-VMNetworkAdapter -PortMirroring Destination
F. Get-VM u201cVM5 | Set-VMNetworkAdapter -AllowTeaming On
Answer: C,E
Explanation:
-PortMirroring specifies the port mirroring mode for the network adapter. This can be set to None, Source, and Destination.
u2711 If set to Source, a copy of every network packet it sends or receives is forwarded
to a virtual network adapter configured to receive the packets.
u2711 If set to Destination, it receives copied packets from the source virtual network
adapter.
In this scenario, VM5 is the destination which must receive a copy of the network packets from VM6, which s the source.
Reference: http://technet.microsoft.com/en-us/library/hh848457.aspx
Question No: 14
You have a server named dc2.contoso.com that runs Windows Server 2012 R2 and has the DNS Server server role installed.
You open DNS Manager as shown in the exhibit. (Click the Exhibit button.)
You need to view the DNS server cache from DNS Manager. What should you do first?
A. From the View menu, click Filter...
B. From the Action menu, click Configure a DNS Server...
C. From the Action menu, click Properties.
D. From the View menu, click Advanced.
Answer: D
Explanation:
To view the contents of the DNS cache, perform the following steps:
1. Start the Microsoft Management Console (MMC) DNS snap-in (Go to Start, Programs, Administrative Tools, and click DNS).
2. From the View menu, select Advanced.
1. 3. Select the Cached Lookups tree node from the left-hand pane to display the top-level domains (e.g., com, net) under.(root). Expand any of these domains to view the cached DNS information (the actual records will appear in the right-hand pane).
Navigating the DNS Manager console you should go to the View menu and click the Advanced tab. That will yield the DNS server cache.
Reference: http://technet.microsoft.com/en-us/library/ee683892%28v=WS.10%29.aspx
Question No: 15
Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. All servers run Windows Server 2012 R2. The domain contains two domain controllers named DC1 and DC2. Both domain controllers are virtual machines on a Hyper-V host.
You plan to create a cloned domain controller named DC3 from an image of DC1. You need to ensure that you can clone DC1.
Which two actions should you perform? (Each correct answer presents part of the solution.
Choose two.)
A. Add the computer account of DC1 to the Cloneable Domain Controllers group.
B. Create a DCCloneConfig.xml file on DC1.
C. Add the computer account of DC3 to the Cloneable Domain Controllers group.
D. Run the Enable-AdOptionalFeaturecmdlet.
E. Modify the contents of the DefaultDCCIoneAllowList.xml file on DC1.
Answer: A,B
Explanation:
:A. Cloneable Domain Controllers Group Thereu2021s a new group in town. Itu2021s called Cloneable Domain Controllers and you can find it in the Users container. Membership in this group dictates whether a DC can or cannot be cloned. This group has some permissions set on the domain head that should not be removed. Removing these permissions will cause cloning to fail. Also, as a best practice, DCs shouldnu2021t be added to the group until you plan to clone and DCs should be removed from the group once cloning is complete. Cloned DCs will also end up in the Cloneable Domain Controllers group.
:B. DCCloneConfig.xml
Thereu2021s one key difference between a cloned DC and a DC that is being restored to a previous snapshot:
DCCloneConfig.XML.
DCCloneConfig.xml is an XML configuration file that contains all of the settings the cloned DC will take when it boots. This includes network settings, DNS, WINS, AD site name, new DC name and more. This file can be generated in a few different ways.
The New-ADDCCloneConfigcmdlet in PowerShell By hand with an XML editor
By editing an existing config file, again with an XML editor.
Reference: Virtual Domain Controller Cloning in Windows Server 2012.
Question No: 16
You have a server that runs a Server Core installation of Windows Server 2012 R2. You need to change the DNS server used by IPv6.
What should you do?
A. From Sconfig, configure the Network Settings.
B. Run the sc.exe command and specify the config parameter.
C. From Windows PowerShell, run the Set-NetIpv6Protocol cmdlet.
D. From Windows PowerShell, run the Set-DnsClientServerAddress cmdlet.
Answer: D
Explanation:
The Set-DnsClientServerAddresscmdlet sets one or more IP addresses for DNS servers associated with an interface. This cmdlet statically adds DNS server addresses to the interface. If this cmdlet is used to add DNS servers to the interface, then the DNS servers will override any DHCP configuration for that interface.
PS C:> Set-DnsClientServerAddress -InterfaceIndex 12 -ServerAddresses "10.0.0.1","10.0.0.2")
References:
http://technet.microsoft.com/en-us/library/jj592692.aspx http://technet.microsoft.com/en-us/library/jj590768.aspx
100% Renew Microsoft 70-410 Questions & Answers shared by Surepassexam, Get HERE: https://www.surepassexam.com/70-410-exam-dumps.html (New 496 Q&As)