Your success in Microsoft 70 410 exam questions is our sole target and we develop all our 70 410 practice exam braindumps in a way that facilitates the attainment of this target. Not only is our 70 410 installing and configuring windows server 2012 r2 study material the best you can find, it is also the most detailed and the most updated. 70 410 practice exam Practice Exams for Microsoft Windows Server 70 410 vce are written to the highest standards of technical accuracy.
2026 New 70-410 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/70-410/
P.S. Accurate 70-410 practice exam are available on Google Drive, GET MORE: https://drive.google.com/open?id=1XEw2m0USoR1DzdkDOR873WF9RHZitH-o
New Microsoft 70-410 Exam Dumps Collection (Question 3 - Question 12)
Question No: 3
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. The domain contains a virtual machine named VM1.
A developer wants to attach a debugger to VM1.
You need to ensure that the developer can connect to VM1 by using a named pipe. Which virtual machine setting should you configure?
A. BIOS
B. Network Adapter
C. COM 1
D. Processor
Answer: C
Explanation:
Named pipe.
This option connects the virtual serial port to a Windows named pipe on the host operating system or a computer on the network. A named pipe is a portion of memory that can be used by one process to pass information to another process, so that the output of one is the input of the other. The second process can be local (on the same computer as the first) or remote (on a networked computer). For example, a local named pipe path could be
\.pipemypipename. Named pipes can be used to create a virtual null modem cable between two virtual machines, or between a virtual machine and a debugging program on the host operating system that supports the use of named pipes.
By connecting two virtual serial ports to the same named pipe, you can create a virtual null modem cable connection. Named pipes are useful for debugging or for any program that requires a null modem connection.
Named pipes can be used to connect to a virtual machine by configuring COM 1. References:
http://support.microsoft.com/kb/819036
http://support.microsoft.com/kb/141709
Question No: 4
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. Server1 has a virtual switch named RDS Virtual.
You replace all of the network adapters on Server1 with new network adapters that support single-root I/O visualization (SR-IOV).
You need to enable SR-IOV for all of the virtual machines on Server1.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. On each virtual machine, modify the Advanced Features settings of the network adapter.
B. Modify the settings of the RDS Virtual virtual switch.
C. On each virtual machine, modify the BIOS settings.
D. Delete, and then recreate the RDS Virtual virtual switch.
E. On each virtual machine, modify the Hardware Acceleration settings of the network adapter.
Answer: D,E
Explanation:
The first step when allowing a virtual machine to have connectivity to a physical network is to create an external virtual switch using Virtual Switch Manager in Hyper-V Manager. The additional step that is necessary when using SR-IOV is to ensure the checkbox is checked when the virtual switch is being created. It is not possible to change a u201cnon SR-IOV modeu201d external virtual switch into an u201cSR-IOV modeu201d switch. The choice must be made a switch
creation time. Thus you should first delete the existing virtual switch and then recreate it. E: Once a virtual switch has been created, the next step is to configure a virtual machine. SR-IOV in Windows Server u201c8u201d is supported on x64 editions of Windows u201c8u201d as a guest operating system (as in Windows u201c8u201d Server, and Windows u201c8u201d client x64, but not x86 client).We have rearranged the settings for a virtual machine to introduce sub-nodes under a network adapter, one of which is the hardware acceleration node. At the bottom is a checkbox to enable SR-IOV.
Question No: 5
You have a server named Server1 that runs Windows Server 2012 R2. You add a 4-TB disk named Disk 5 to Server1.
You need to ensure that you can create a 3-TB volume on Disk 5. What should you do?
A. Create a storage pool.
B. Convert the disk to a dynamic disk.
C. Create a VHD, and then attach the VHD.
D. Convert the disk to a GPT disk.
Answer: : D
Explanation:
MBR max is 2TB, the disk must be GPT
For any hard drive over 2TB, we need to use GPT partition. If you have a disk larger than 2TB size, the rest of the disk space will not be used unless you convert it to GPT. An existing MBR partition canu2021t be converted to GPT unless it is completely empty; you must either delete everything and convert or create the partition as GPT. It is not possible to boot to a GPT partition, impossible to convert MBR to GPT without data loss.
Question No: 6
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has three physical network adapters named NIC1, NIC2, and NIC3.
On Server1, you create a NIC team named Team1 by using NIC1 and NIC2. You configure Team1 to accept network traffic on VLAN 10.
You need to ensure that Server1 can accept network traffic on VLAN 10 and VLAN 11. The solution must ensure that the network traffic can be received on both VLANs if a network adapter fails.
What should you do?
A. From Server Manager, change the load balancing mode of Team1.
B. Run the New-NetLbfoTeam cmdlet.
C. From Server Manager, add an interface to Team1.
D. Run the Add-NetLbfoTeamMember cmdlet.
Answer: C
Question No: 7
You have a Hyper-V host named Server1 that runs Windows Server 2012 R2. Server1 hosts a virtual machine named VM1 that runs Windows Server 2012 R2. VM1 has several snapshots.
You need to modify the snapshot file location of VM1. What should you do?
A. Delete the existing snapshots, and then modify the settings of VM1.
B. Right-click VM1, and then click Move.
C. Right-click VM1, and then click Export.
D. PauseVM1, and then modify the settings of VM1.
Answer: A
Explanation:
You will need to navigate to the Hyper-V Management snap-in (C:ProgramDataMicrosoftWindowsHyper-V) and from there access the Snapshot file Location tab where you can change the settings for the VM1 snapshot file location. However, since there are already several snapshots in existence, you will need to delete them first because you will not be able to change the location of the snapshot file while there is an existing snapshot.
You need to modify the snapshot file location of VM1.
Question No: 8
Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 is a member of a workgroup.
You need to configure a local Group Policy on Server1 that will apply only to non- administrators.
Which tool should you use?
A. Group Policy Object Editor
B. Group Policy Management
C. Group Policy Management Editor
D. Server Manager
Answer: A
Explanation:
Once you create a GPO, you can open it in the Group Policy Management Editor and configure the GPOu2021s policies, specifically those settings that target the non-administrators. In this scenario however, you still need to configure the Group Policy thus you would need the GPO Editor.
References:
Training Guide: Installing and Configuring Windows Server 2012 R2, Chapter 10: Implementing Group Policy, Lesson 1: Planning, implementing and managing group policy, p. 475
Question No: 9
You have a server named Server1 that runs Windows Server 2012 R2. You plan to create a storage pool that will contain a new volume.
You need to create a new 600-GB volume by using thin provisioning. The new volume must use the parity layout.
What is the minimum number of 256-GB disks required for the storage pool?
A. 2
B. 3
C. 4
D. 5
Answer: C
Explanation:
It takes 3 discs (minimum) in order to create a storage pool array with parity. If this array were using fixed provisioning, this would not be enough given the 256MB capacity (since only 2/3rds of 256 X 3 - less than 600 - could be used as actual data with the rest being parity bits), but since this array uses thin provisioning, a 600GB volume could technically be set up on a 20GB disc and it would still show as 600GB. (So, essentially, the question really becomes how many drives it takes in a storage pool to create a parity array.)
References:
http://technet.microsoft.com/en-us/library/hh831391.aspx http://www.ibeast.com/content/tools/RaidCalc/RaidCalc.asp http://www.raid-calculator.com/default.aspx
https://www.icc-usa.com/raid-calculator
Question No: 10
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2012 R2.
Server2 establishes an IPSec connection to Server1.
You need to view which authentication method was used to establish the initial IPSec connection.
What should you do?
A. From Windows Firewall with Advanced Security, view the quick mode security association.
B. From Event Viewer, search the Application Log for events that have an ID of 1704.
C. From Event Viewer, search the Security Log for events that have an ID of 4672.
D. From Windows Firewall with Advanced Security, view the main mode security association.
Answer: D
Explanation:
Main mode negotiation establishes a secure channel between two computers by determining a set of cryptographic protection suites, exchanging keying material to establish a shared secret key, and authenticating computer and user identities. A security association (SA) is the information maintained about that secure channel on the local computer so that it can use the information for future network traffic to the remote computer. You can monitor main mode SAs for information like which peers are currently connected to this computer and which protection suite was used to form the SA.
To get to this view
In the Windows Firewall with Advanced Security MMC snap-in, expand Monitoring, expand Security Associations, and then click Main Mode.
The following information is available in the table view of all main mode SAs. To see the information for a single main mode SA, double-click the SA in the list.
Main mode SA information
You can add, remove, reorder, and sort by these columns in the Results pane: Local Address: The local computer IP address.
Remote Address: The remote computer or peer IP address.
1st Authentication Method: The authentication method used to create the SA.
1st Authentication Local ID: The authenticated identity of the local computer used in first authentication.
1st Authentication Remote ID: The authenticated identity of the remote computer used in first authentication.
2nd Authentication Method: The authentication method used in the SA.
2nd Authentication Local ID: The authenticated identity of the local computer used in second authentication.
2nd Authentication Remote ID: The authenticated identity of the remote computer used in second authentication.
Encryption: The encryption method used by the SA to secure quick mode key exchanges. Integrity: The data integrity method used by the SA to secure quick mode key exchanges. Key Exchange: The Diffie-Hellman group used to create the main mode SA.
Reference: http://technet.microsoft.com/en-us/library/dd448497(v=ws.10).aspx
Question No: 11
Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. The domain contains two domain controllers named DC1 and DC2 that run Windows Server 2012 R2.
The domain contains a user named User1 and three global security groups named Group1, Group2 and, Group3.
You need to add User1 to Group1, Group2, and Group3. Which cmdlet should you run?
A. Add-AdPrincipalGroupMembership
B. Install-AddsDomainController
C. Install-WindowsFeature
D. Install-AddsDomain
E. Rename-AdObject
F. Set-AdAccountControl
G. Set-AdGroup
H. Set-User
Answer: A
Explanation:
The Add-ADPrincipalGroupMembershipcmdlet adds a user, group, service account, or computer as a new member to one or more Active Directory groups.
References:
http://technet.microsoft.com/en-us/library/ee617203.aspx http://technet.microsoft.com/en-us/library/hh974723.aspx
Question No: 12
Your network contains a Hyper-V host named Server1 that runs Windows Server 2012 R2. Server1 hosts a virtual machine named VM1 that runs Windows Server 2012 R2.
You create a checkpoint of VM1, and then you install an application on VM1. You verify that the application runs properly.
You need to ensure that the current state of VM1 is contained in a single virtual hard disk file.
The solution must minimize the amount of downtime on VM1. What should you do?
A. From a command prompt, run dism.exe and specify the /delete-image parameter.
B. From a command prompt, run dism.exe and specify the /commit-image parameter.
C. From Hyper-V Manager, delete the checkpoint.
D. From Hyper-V Manager, inspect the virtual hard disk.
Answer: C
Recommend!! Get the Accurate 70-410 dumps in VCE and PDF From Allfreedumps, Welcome to download: https://www.allfreedumps.com/70-410-dumps.html (New 496 Q&As Version)