A Review Of Actual NS0-184 Sample Question

NEW QUESTION 1
Exhibit:

You finished installing an ONTAP cluster and must inform the customer of the completion. As part of this exercise, you will show how to configure the ONTAP cluster using ONTAP System Manager, so that NetApp will receive notifications of any future issues. What would you select to allow the customer to receive this information?

• A. General
• B. Date and Time
• C. Users
• D. AutoSupport

Answer: D

NEW QUESTION 2
When creating a new 3.8 TB SSD-based aggregate, what is the default RAID type used with ONTAP 9.8?

• A. RAID 4
• B. RAID-TEC
• C. RAID 0
• D. RAID DP

Answer: D

NEW QUESTION 3
Which two functions does the management network provide? (Choose two.)

• A. to provide access to the system console of any node in the cluster
• B. to collect diag log files
• C. to replicate the cluster configuration to all nodes
• D. to transfer SVMs between the cluster nodes

Answer: AB

NEW QUESTION 4
You want to use the NetAppDocs tool to collect information on a newly configured ONTAP 9.8 cluster and to generate a Word document with the details of the cluster configuration.
Which two data sources would you use to collect the necessary data? (Choose two.)

• A. Active IQ Digital Advisor
• B. Active IQ Unified Manager
• C. ONTAP Cluster
• D. AutoSupport packages

Answer: BC

NEW QUESTION 5
You installed a new 4-node AFF A400 ONTAP 9.8 cluster. The AFF400 controller data ports were
automatically discovered by “automatic port placement”.
In this scenario, which two ONTAP network settings were automatically configured? (Choose two.)

• A. routes
• B. IPspaces
• C. broadcast domains
• D. subnets

Answer: AD

NEW QUESTION 6
Upon finishing the Installation of a new system for a customer, they request that you train them on how to administer the system. In this scenario, which two responses are appropriate? (Choose two.)

• A. Visit the NetApp MySupport Site and look for the Express Guides, they will guide you through the dailytasks and provide input and output examples.
• B. If you have a specific issue, you can visit the Knowledge Base Web site (https://kb.netapp,com).
• C. The answers to any of your questions can be found on the NetApp SmartSolve site(http://smartsolve.netapp.com).
• D. You should open a case with NetApp Support for all future questions with low priority and include thekeyword "Training" in the title.

Answer: AC

NEW QUESTION 7
You are deploying a new AFF All SAN Array A250 into a customer’s existing data fabric.
In this scenario, which two tools would give insight into their existing Cisco MDS fabric configuration?
(Choose two.)

• A. Brocade SAN Health
• B. Cisco Data Center Network Manager (DCNM)
• C. Active IQ
• D. Active IQ Config Advisor

Answer: BC

Explanation:
Explanation\:
Reference: https://www.cisco.com/c/en/us/products/collateral/storage-networking/mds-9700-seriesmultilayerdirectors/
cisco-ucs-mds.html
https://www.cisco.com/c/en/us/products/collateral/servers-unified-computing/ucs-x-series-modularsystem/
flexpod-datacenter-ucs-intersight.html

NEW QUESTION 8
You installed two separate clusters in an isolated data center without outbound network
access. The customer wants to troubleshoot issues locally and also create custom Excel reports for
capacity utilization from a local server.
In this scenario, which NetApp tool would satisfy this requirement?

• A. Active IQ Digital Advisor
• B. Cloud Insights
• C. ONTAP System Manager
• D. Active IQ Unified Manager

Answer: D

NEW QUESTION 9
Click the Exhibit button.

While you are introducing the customer to the NetApp Support website, they ask you to ensure that the new ONTAP storage array is covered by support before you complete the knowledge transfer procedure. Referring to the exhibit, which two widgets would you select to accomplish this task?
(Choose two.)

• A. Active IQ
• B. Product Support
• C. Systems
• D. Contracts and Warranties

Answer: CD

NEW QUESTION 10
An administrator issued the cluster setup command and configured a 2-node ONTAP 9.8 cluster.
In this scenario, which tool would the administrator use to validate the configuration?

• A. Active IQ Upgrade Advisor
• B. Interoperability Matrix Tool
• C. NetAppDocs
• D. Active IQ Config Advisor

Answer: C

NEW QUESTION 11
After the installation of a new ONTAP 9.8 cluster, you have to verify if AutoSupport works.
In this scenario, which two commands would you use to accomplish this task? (Choose two.)

• A. system node autosupport history show
• B. system node autosupport check show
• C. system node autosupport destination show
• D. system node autosupport invoke

Answer: AB

NEW QUESTION 12
You are preparing to add a 2-node AFF A250 system to an existing 4-node AFF A800 cluster with Cisco
Nexus 3232C switches. The cluster switches are currently running the Cluster-HA RCF.
In this scenario, which two steps are required to install the AFF A250 system? (Choose two.)

• A. Load the Storage RCF.
• B. Cable the AFF A250 nodes to the next free ports on the switch.
• C. Cable the AFF A250 nodes to the breakout ports on the switch.
• D. Load the Cluster-HA-Breakout RCF.

Answer: CD

NEW QUESTION 13
You are installing a new ONTAP 9.8 cluster by using System Manager Guided Setup. In this scenario, which IP address is optional?

• A. node A IP address
• B. node B IP address
• C. gateway IP address
• D. cluster IP address

Answer: C

NEW QUESTION 14
A storage administrator is trying to upgrade a pair of FAS2520s with internal SATA storage to a new 2-node FAS8300 cluster. The storage administrator wants to preserve the existing data.
In this scenario, which two capabilities are available to the storage administrator? (Choose two.)

• A. the ability to move the volumes from the old nodes to the new nodes
• B. the ability to pull out the tray of internal disks of the FAS2520s and reseat the tray in the internal storage of the FAS8300s
• C. the ability to create a 4-node MetroCluster across the four nodes
• D. the ability to convert the FAS2520s to disk shelves and attach them to the new nodes

Answer: CD

NEW QUESTION 15
Click the Exhibit button.

What are two functions of the four Ethernet switches in the supported configuration that is shown in the exhibit? (Choose two.)

• A. to provide a direct connection for the SnapMirror Synchronous (SM-S)
• B. to install cross-site cluster management switches
• C. to provide connectivity for NVRAM over iWARP
• D. to enable SyncMirror replication

Answer: AC

NEW QUESTION 16
You want to enable secure communication with the SP or BMC through CA-signed certificates.
Which two certificate types must be installed in this scenario? (Choose two.)

• A. cluster certificate
• B. server certificate
• C. root CA certificate
• D. ONTAP certificate

Answer: BC

Explanation:
Reference:
https://kb.netapp.com/Advice_and_Troubleshooting/Data_Storage_Software/ONTAP_OS/How_to_c
onfigure_communication_between_ONTAP_and_Service_Processor_(SP)_or_BMC_with_Certificate_
Authority_(CA)_signed_certificates

NEW QUESTION 17
You are setting up a peer relationship between two ONTAP clusters.
In this scenario, which two statements are true regarding authentication?

• A. Peering authentication status can be verified with the cluster peer show command.
• B. Peering authentication can be configured using LDAP users and groups.
• C. Peering authentication is required before enabling peering encryption.
• D. Peering authentication can use an ONTAP generated passphrase.

Answer: AD

NEW QUESTION 18
After moving a new AFF A400 cluster into production, the administrator notices error events in ONTAP
System Manager regarding SAS HA issues.
In this scenario, which NetApp tool would have identified these errors after the installation process?

• A. Cloud Manager
• B. ONTAP System Manager
• C. Active IQ Config Advisor
• D. Active IQ Unified Manager

Answer: B

NEW QUESTION 19
......