Top Tips Of Avant-garde NS0-520 Exam Topics

NEW QUESTION 1

As a system administrator, you perform a routine check of available storage space on your FAS2750. You notice that the vol_1 volume is approaching 100% capacity. The volume is configured with the space guarantee set to volume and the LUN reservation is disabled. You want to free up space in the volume without increasing its size.
Which action would accomplish this task?

• A. Increase the size of the LUN.
• B. Increase the Snapshot Reserve.
• C. Increase the aggregate size.
• D. Use deduplication.

Answer: C

NEW QUESTION 2

Exhibit.

The exhibit shows the Inn show command output for the oradata oraFinProd_l LUN. Which two statements ate correct about the LUN'? (Choose two.)

• A. The LUN Is thick provisioned.
• B. The LUN supports SCSI Tin unmap.
• C. The LUN type is Windows.
• D. The LUN is thin provisioned.

Answer: BD

NEW QUESTION 3

Which two scenarios in deploying ONTAP Cloud are supported by the Cloud Manager tool? (Choose two.)

• A. ONTAP Cloud deployed as an HA pair on IBM Cloud
• B. ONTAP Cloud deployed as an HA pair on VMware
• C. ONTAP Cloud deployed as a single instance on Microsoft Azure
• D. ONTAP Cloud deployed as an HA pair on Amazon Web Services

Answer: CD

NEW QUESTION 4

What are two examples of supported NetApp FC configurations? (Choose two.)

• A. a single NetApp node directly connected to a single host
• B. a single switched environment with a NetApp node connected to only one host
• C. a dual switched environment with a NetApp node connected to multiple hosts
• D. a single NetApp node directly connected to multiple hosts

Answer: BC

NEW QUESTION 5

Exhibit.

You are working on a project to install a new AFF A300 storage array. You use a pair of Nexus 3596 switches for FC connectivity between your VMware ESXi servers and the AFF A300.
Which SAN switch feature must be enabled to accomplish this task?

• A. N_Port ID visualization (NP1V)
• B. Open Shortest Path First (OSPF)
• C. Link Aggregation Control Protocol (LACP)
• D. N_Port Visualization (NPV)

Answer: A

NEW QUESTION 6

Which native GUI switch tool is used to manage Cisco MDS-Series switches and directors?

• A. Operations Manager
• B. Fabric Manager
• C. Web Tools
• D. Data Fabric Manager

Answer: B

NEW QUESTION 7

You have a SAN host that is only sending traffic to an ONTAP cluster using active non-optimized paths. In this scenario, over which network type does the node that is hosting the target LUN receive the
traffic?

• A. Fibre Channel network
• B. Cluster network
• C. ISCSI network
• D. Intercluster network

Answer: B

Explanation:
The Cluster Network
This is used for traffic that is going between the nodes themselves, such as system information that is being replicated between the nodes. Also, if incoming client data traffic hits a network port on a different
controller than the one which owns the disks, that traffic will also go over the cluster network.

NEW QUESTION 8



Referring to the exhibit, what is the problem with switch port 0?

• A. The transmit and receive links were switched.
• B. The SFP+ is faulty.
• C. The receive power is lower.
• D. The link is not connected.

Answer: C

NEW QUESTION 9

An administrator who is using the Virtual Storage Console (VSC) creates a new FC datastore on an existing volume. While the datastore was provisioned, two hosts were in maintenance mode. When the maintenance was completed, the two hosts do not have access to the new datastore, but they have access to other datastores on the same volume.
In this scenario, what caused this result?

• A. The VSC cannot create datastores while hosts are in maintenance mode.
• B. During host maintenance, the FC HBAs were replaced with different FC HBAs.
• C. The VSC created a new igroup that contains only the hosts that were online during the datastore creation.
• D. After creation using the VSC, the administrator needs to create a LUN mapping.

Answer: C

NEW QUESTION 10

A storage administrator needs to ensure that an ONTAP FC LUN is accessible for a remote data center. The ISL ports are reporting errors. The trunkshow command output from a Brocade switch is shown below.

• A. Set the ISL ports as FL_Ports
• B. Set the ISL ports as N_Ports
• C. Set the ISL ports as F_Ports
• D. Set the ISL ports as E_Ports

Answer: D

Explanation:
On each switch fabric, you must configure the switch ports that connect the Inter-Switch Link (ISL). These ISL ports are otherwise known as the E-ports.
You can find more information on this link:
https://library.netapp.com/ecmdocs/ECMP1636017/html/GUID-B2BBB025-02A9-442C-9910-00FEF253CE52.

NEW QUESTION 11

You want configure namespaces to support NVMe over Fibre Channel (NVMe/FC) using ONTAP 9.8. Which action will accomplish this task?

• A. Add FC to the list of SVM protocols
• B. Remove any protocols from the SVM before adding the NVMe protocol
• C. Enable ALUA on the namespaces that should use the NVMe protocol
• D. Configure a LIF for the NVMe protocol

Answer: D

Explanation:
Although ONTAP uses a NVMe/FC LIF that is separate from the FCP LIFs, both LIFs can be hosted on the same physical HBA port at both the host initiator and storage target. NVMe/FC and FCP can
share the same physical infrastructure concurrently, so the same physical port, cable, switch port, and target port can simultaneously host and transmit both FCP and NVMe/FC frames
NVMe can use the same FC infraestructure, but it needs to create a separate NVMe LIF to work. You can find more information on this link:
https://www.netapp.com/de/media/10681-tr4684.pdf (14)

NEW QUESTION 12

Which option needs to be set on a LUN to guarantee that it cannot be affected by other LUNs in the volume?

• A. Volume Guarantee
• B. Volume Space Reserved
• C. LUN Reservation Disabled
• D. LUN Reservation Enabled

Answer: D

NEW QUESTION 13

You need to move a LUN non-disruptively from an AFF A200 HA pair to an AFF A700 HA pair within the same 4-node cluster using the steps shown below.
* 1. Scan the host OS to discover all paths to the LUN.
* 2. Execute the lun move command to move the LUN to the AFF A/00 HA pair.
* 3. Remove the AFF A200 HA pair from the reporting-nodes list.
* 4. Add the AFF A700 HA pair to the reporting-nodes list. What is the correct sequence in performing, these steps?

• A. 1, 2, 3. 4
• B. 4. 1, 2, 3
• C. 4, 3. 2. 1
• D. 3, 2, 1,4

Answer: B

NEW QUESTION 14

You ate deploying an 8-node FAS8200 ONTAP cluster and attaching to an existing FC fabric.
Which two ONTAP features would be used to restrict or limit the available paths seen from the host? (Choose two.)

• A. port sets
• B. igroup
• C. VIAN
• D. Selective IUN Map

Answer: AD

NEW QUESTION 15

Exhibit.

An administrator is configuring FCoE on Cisco Nexus switches for a new AFF A200 ONTAP cluster. The administrator executes the commands shown in the exhibit to create the necessary network configuration.
Which VLAN is responsible for controlling the FCoE traffic on the new interface?

• A. 3011
• B. 23
• C. 11

Answer: B

NEW QUESTION 16
......