Top Tips Of Avant-garde PL-400 Questions Pool

NEW QUESTION 1

A university manages grant applications using a model-driven app.
Users report that the message on the Grant Application screen is outdated. The screen shows the following:

Use the drop-down menus to select the answer choice that answers each question based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
Reference:
https://www.loganconsulting.com/blog/how-use-power-automate-trigger-workflows-microsoft-dynamics-crm/

NEW QUESTION 2

A travel agency has a Dynamics 365 Customer Engagement.
Customers are allowed to add up to three countries/regions to their travel preferences from the website. Their preferences must be stored in the Contact entity.
You need to register the plug-in to meet the requirements.
Which value should you apply for each parameter? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
Box 1: associate
Box 2: contact
Customers are allowed to add up to three countries/regions to their travel preferences from the website. Their preferences must be stored in the Contact entity.
Box 3: country
Box 4: synchronous Reference:
https://docs.microsoft.com/en-us/powerapps/developer/common-data-service/tutorial-write-plug-in

NEW QUESTION 3

A company must copy customer account data changes from a Common Data Service (CDS) instance into an external system.
Azure Storage Queues are used to pass the changes from CDS to the external system. You have the following code. (Line numbers are included for reference only.)

For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
Box 1: Yes
Box 2: Yes
Box 3: No
Either new/updated or removed/deleted. Box 4: Yes

NEW QUESTION 4

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
A university has implemented Dynamics 365 Customer Engagement. Several departments use opportunity records to bid for funding for projects within their own departments.
Each department’s opportunities are not visible to other departments. However, there are times when two departments need to work together on an opportunity.
You need to configure the security to meet the business requirements.
Solution: Use access team templates and give access to members in the two departments. Does the solution meet the goal?

• A. Yes
• B. No

Answer: A

Explanation:
Access Team template
The privileges assigned to the access team through Access Team Templates. Access Team template allows you to create a template for the entities on which “Access Teams” option is enabled. You can grant or restrict access to the entity records through “Access Rights”. Essentially, this is like a record-based security model on an entity record for specific users.
Once the access team template is created and added to the entity form, you can start adding users. For example, on an opportunity record add a new user in the Access Team Template sub-grid.
Reference:
https://community.dynamics.com/crm/b/crmdevmigrationconfigandcustomization/posts/access-teams-and-acces

NEW QUESTION 5

You need to ensure that Adventure Works Cycle can track information from visitors to bike fairs. What should you create?

• A. A workflow in Dynamics 365 Sales Engagement for capabilities leads
• B. A flow to capture customer data from the bike fair Power Apps in SharePoint and create a lead in Microsoft Teams.
• C. A flow that connects with the bike fair Power Apps to create a lead in Dynamic 365 Sales
• D. A Microsoft flow that generates a new customer record in SharePoint

Answer: C

Explanation:
By using a Dynamics 365 connector, you can create flows that initiate when an event occurs in Dynamics 365, or some other service, which then performs an action in Dynamics 365, or some other service.
Reference:
https://docs.microsoft.com/en-us/power-automate/connection-dynamics365

NEW QUESTION 6

You need to add the script for the registration form event handling. Which code segment should you use?

• A. formContext.data.entity.addOnSave(myFunction)
• B. formContext.data.addOnLoad(myFunction)
• C. formContext.data.removeOnLoad(myFunction)
• D. addOnPreProcessStatusChange
• E. formContext.data.isValid()

Answer: B

Explanation:
Scenario: Information about upcoming tournaments must be pre-located into the registration form when the registration form loads.
addOnLoad adds event handlers to the Subgrid OnLoad event event. Reference:
https://docs.microsoft.com/en-us/powerapps/developer/model-driven-apps/clientapi/reference/grids/gridcontrol/a

NEW QUESTION 7

A company imports data from files.
The following code is created to import the files. (Line numbers are included for reference only.)

For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
Box 1: No
Need to set ContinueOnError=True. ContinueOnError: When true, continue processing the next request in the collection even if a fault has been returned from processing the current request in the collection. When false, do not continue processing the next request.
Box 2: No
ContinueOnError = true must be added before Requests = new OrganizationRequestCollection() on line 3. Example:
// Create an ExecuteMultipleRequest object.
requestWithResults = new ExecuteMultipleRequest()
{
// Assign settings that define execution behavior: continue on error, return responses. Settings = new ExecuteMultipleSettings()
{
ContinueOnError = false, ReturnResponses = true
},
// Create an empty organization request collection. Requests = new OrganizationRequestCollection()
};
Box 3: Yes
You can use the ExecuteMultipleRequest message to support higher throughput bulk message passing scenarios in Common Data Service. ExecuteMultipleRequest accepts an input collection of message Requests, executes each of the message requests in the order they appear in the input collection, and optionally returns a collection of Responses containing each message’s response or the error that occurred.
Box 4: No
This is just for displaying the result. Reference:
https://docs.microsoft.com/en-us/powerapps/developer/common-data-service/org-service/execute-multiple-reque

NEW QUESTION 8

An organization plans to set up a secure connector for Power Apps. The App will capture tweets from Twitters about the organization’s upcoming product for sales follow-up.
You need to configure security for the app. Which authentication method should you use?

• A. OAuth
• B. API key
• C. Windows authentication
• D. Kerberos authentication
• E. Basic authentication

Answer: A

Explanation:
Configure OAuth2 provider settings for portals.
The OAuth 2.0 based external identity providers involve registering an "application" with a third-party service to obtain a "client ID" and "client secret" pair.
The supported providers are:
Microsoft Account
Twitter
Facebook
Google
LinkedIn
Yahoo
Reference:
https://docs.microsoft.com/en-us/powerapps/maker/portals/configure/configure-oauth2-settings

NEW QUESTION 9

A company plans to replicate a Dynamics 365 Sales database into an Azure SQL Database instance for
reporting purposes. The data Export Service solution has been installed. You need to configure the Data service.
Which three actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

• A. Create an Azure SQL Database service in the same tenant as the Dynamics 365 Sales environment.
• B. Enable auditing entities that must be replicated to Azure SQL database.
• C. Enable change tracking for all entities that must be replicated to Azure SQL Database.
• D. Set up server-based integration.
• E. Create an export profile that specifies all the entities that must be replicated.

Answer: ACE

Explanation:
Reference:
https://docs.microsoft.com/en-us/power-platform/admin/replicate-data-microsoft-azure-sql-database

NEW QUESTION 10

A company uses SharePoint for its intranet and other functions. The company has also implemented model-driven apps.
SharePoint users must be able to create contact records in the Common Data Service (CDS), without having to navigate to the model-driven apps.
You need to create a link in SharePoint to open the CDS contact from displaying data from SharePoint. How should you complete the URL? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
https://contoso.crm.dynamics.com/main.aspx?etn=contact&extraqs=param_1%3D&pagetype=entityrecord Box 1: main.aspx
Example, to open the Active Contacts view. https://myorg.crm.dynamics.com/main.aspx?etn=contact&pagetype=entitylist&viewid={00000000-0000-0000-0 Box 2: etn
Etn: The logical name of the entity. Important: Do not use the etc (entity type code) parameter that contains an integer code for the entity. This integer code varies for custom entities in different organizations.
Box 3: Extraqs
Extraqs: Optional for forms. This parameter contains encoded parameters within this parameter.
When you open a new form by using the URL address, you can include arguments in the extraqs parameter to set field values
Note: You must encode the parameters passed in the extraqs parameter. To encode the parameters, use encodeURIComponent. To use special characters like "=" or "&" in the parameter values, you must double encode (e.g. to set name to A=B&C, it would be extraqs=name%3DA%253DB%2526C).
Box 4: entityrecord Reference:
https://docs.microsoft.com/en-us/powerapps/developer/model-driven-apps/open-forms-views-dialogs-reports-url https://docs.microsoft.com/en-us/powerapps/developer/model-driven-apps/set-field-values-using-parameters-pas

NEW QUESTION 11

A company uses a model-driven app to record details of laboratory test.
You are asked to create a custom component that makes it easier to capture multiple values from lab test results on mobile devices.
You need to create the interface for the dataset in case the mobile devices lose connection to the network. Which method should you use?

• A. SaveData
• B. updateView
• C. init
• D. getClient

Answer: A

Explanation:
Use LoadData and SaveData for basic data storage while offline. Note:
When building mobile apps, one of the most common scenarios app makers face is how to enable their users be productive in situations where there is limited or no connectivity at all. This has been one of the most requested features for PowerApps to allow running apps while being disconnected and to provide some support for offline data caching. In this release of PowerApps, we are delivering the first set of improvements for app makers to achieve that by enabling:
Launching the PowerApps mobile player app offline
Running apps while being offline
Determine when your app is online or offline or in a metered connection by using the Connection signal object.
Leverage existing formulas such as LoadData and SaveData for basic data storage while offline.
Reference:
https://powerapps.microsoft.com/sv-se/blog/build-offline-apps-with-new-powerapps-capabilities/

NEW QUESTION 12

You need to replace the bicycle inspection forms.
Which two solutions should you use? Each answer presents part of the solution.
NOTE: Each correct selection is worth one point.

• A. a flow that maps inspection data to Dynamics 365 Field Service
• B. a logic app that guides the technician through the inspection
• C. a canvas app that guides the technician through the inspection
• D. a model-driven app based on customer service entities

Answer: AD

Explanation:
Scenario: The Adventure Works Cycles retail location performs bicycle inspections and performance tune-ups. Technicians use paper forms to document the bicycle inspection performed before a tune-up and any additional work performed on the bicycle.
Reference:
https://docs.microsoft.com/en-us/dynamics365/field-service/overview https://us.hitachi-solutions.com/blog/canvas-vs-model-driven-apps/

NEW QUESTION 13

A company needs to illustrate the relationships of the entities in Dynamics 365 Sales. You need to select the appropriate tool to show this graphic.
Which tool should you select?

• A. Metadata diagram
• B. Sales Insights
• C. Power Automate
• D. Security model

Answer: A

Explanation:
Visual representation of metadata can be useful, especially when you are trying to describe the relationship between entities in the system. You can use the Metadata Diagram sample code provided for Dynamics 365 Customer Engagement (on-premises) to generate the entity relationship diagrams.
You can create a diagram that shows a relationship for just one entity, or a complex diagram that includes
dozens of related entities, including custom and system entities. Reference:
https://docs.microsoft.com/en-us/dynamics365/customerengagement/on-premises/developer/use-metadata-gener

NEW QUESTION 14

A company uses Common Data Service (CDS) and manages their engineers using a model-driven app. You create a new reusable custom component using the PowerApps component framework (PCF).
You need to package the custom component to be deployed into the model-driven app.
Which three commands should you run in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
Step 1: npm install Install Npm
Step 2: pac pcf init ..
Commands for working with Power Apps component framework. It has the following parameters:
init: Initializes the code component project. It has the following parameters
namespace: Namespace of the code component.
name: Name of the code component.
template: Field or dataset
Step 3: pac solution add-reference
Commands for working with Common Data Service solution projects. It has the following parameters: add-References:
Sets the reference path to the component project folder by passing the path parameter.
Syntax: pac solution add-reference --path <path to your Power Apps component framework project> Reference:
https://docs.microsoft.com/en-us/powerapps/developer/common-data-service/powerapps-cli

NEW QUESTION 15

A company implementsDynamics 365 Customer Service. The company deploys synchronous plug-ins for the PreOperation and PostOperation stages on create and for the PostOperation stage on update for processing different case type.
Users experience errors when updating cases. The plug-in trace log files show that the PostOperation plug-in update of case times out after two minutes.
You perform basic testing and discover that this plug-in is triggered on every update of a case. You examine the code and discover that the plug-in retrieves all columns for the updated case record performing its work.
You need to reduce the number of errors. You need to achieve this goal with the test amount of changes. Solution: In the Plug-in Registration tool, set filtering attributes on the plug-in to only Case Type filed. Does the solution meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 16

You are developing an app for a sales team to record contact details in their Common Data Service (CDS) database.
The app must handle loss of network and save the data to CDS when reconnected.
The main screen of the app has a form to collect contact data and a button. The OnSelect property for the button has the following expression:

For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
Box 1: Yes
LoadData and SaveData combine to form a simple mechanism to store small amounts of data on a local device. By using these functions, you can add simple offline capabilities to your app.
Box 2: No
Box 3: No
Box 4: Yes Reference:
https://docs.microsoft.com/en-us/powerapps/maker/canvas-apps/offline-apps

NEW QUESTION 17

User1 and User2 use a form named F1 to enter account data. Both users have the same security role, SR1, in the same business unit.
User1 has a business rule to make the main phone mandatory if the relationship type is Reseller. User2 must occasionally create records of the Reseller type without having the reseller’s phone number and is blocked by User1’s business rule.
You need to ensure that User2 can enter reseller data into the system.
Which three actions should perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
NOTE: More than one order of answer choices is correct. You will receive credit for any of the correct order you select.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 18

You are troubleshooting Power Apps solutions.
You need to determine the cause for the identified issues.
What is the root cause for each issue? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
Box 1: A canvas app in the first solution has errors.
Failures that occur during background processing of the analysis will fail with 'Couldn't be completed' status and return an error message in the Power Apps portal as well as send email notification to the requestor.

Selecting the portal notification will link to this page of common issues for further troubleshooting. If one of the provided common issues does not resolve the problem, a reference number is also returned. Provide this reference number to Microsoft Support for further investigation.

Box 2: The code uses the following rule: web-use-strict-mode
web-use-strict-mode is able to throw a SyntaxError before the script is executing. Example:
The reason is JavaScript lets you compare different variable types but this can have unexpected results, so by using the strict === it compares the same type and won’t have unexpected results this gets a warning
entity.field == "Line1" Reference:
https://docs.microsoft.com/en-us/powerapps/maker/common-data-service/common-issues-resolutions-solution-c

NEW QUESTION 19

You are researching integrations with several external systems. Each integration has different requirements.
You need to determine which data sources to use to meet each requirement.
What should you use? To answer, drag the appropriate data sources to the correct requirements. Each data source may be used once, more than one, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
answer is Virtual Entity
You cannot change the Entity primaryid field to some other field. CRM using GUID as the Primary key for each record.
If you definitely want to make some other field as Primary key, you could consider using Alternate Keys. Source:
https://docs.microsoft.com/en-us/dynamics365/customerengagement/on-premises/developer/define-alternate-key
The caveat being that Alternate Keys can be created for Virtual Entity
B. Answer is: Custom Connector All virtual entitites are read-only. Source:
https://docs.microsoft.com/en-us/dynamics365/customerengagement/on-premises/customize/create-edit-virtual-e
C. Answer is: Virtual Entity
Rows based on virtual tables are available in all clients including custom clients developed using the Dataverse web services.
Source: https://docs.microsoft.com/en-us/powerapps/maker/data-platform/create-edit-virtual-entities

NEW QUESTION 20

A multinational company requires that all phone numbers be standardized as country code + area code + phone number.
The application design team decides that a custom PowerApps component framework (PCF) control should be used to prompt users for an area code and correctly format the phone number.
You need to get the list of valid area codes when a contact record is opened and before the user enters a new phone number.
In which function should you call webAPI.retrieveMultipleRecords?

• A. notifyOutputChanged
• B. init
• C. getOutputs
• D. updateView

Answer: D

Explanation:
The updateView method will be called when any value in the property bag has changed. This includes field values, data-sets, global values such as container height and width, offline status, component metadata values such as label, visible, etc.
Set the value of the field component to the raw value from the configured field. Note: webAPI.retrieveMultipleRecords retrieves a collection of entity records. Reference:
https://docs.microsoft.com/en-us/powerapps/developer/component-framework/reference/control/updateview

NEW QUESTION 21
......