We provide real ccna wireless 200 355 official cert guide pdf exam questions and answers braindumps in two formats. Download PDF & Practice Tests. Pass Cisco 200 355 dumps Exam quickly & easily. The ccna wireless 200 355 dumps PDF type is available for reading and printing. You can print more and practice many times. With the help of our Cisco ccna wireless 200 355 pdf download dumps pdf and vce product and material, you can easily pass the 200 355 wifund pdf exam.


2026 New 200-355 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/200-355/

Q1. Which description best describes upfade in a multipath environment? 

A. In this situation, multiple signal paths are not sent at exactly the same time. The receiver receives a positive crest on the primary signal and a negative crest on the secondary signal. 

B. In this situation, the multiple signal paths are distorted and difficult to understand. 

C. In this situation, the multiple signal paths are weaker than they should be because the signals are out of phase with each other. 

D. In this situation, the signal is stronger than it should be because multiple signal paths are received twice at exactly the same time, which results in the multiple signals being in-phase. 

Answer: D 

Q2. A network engineer requires an antenna for a point-to-point bridge with at least 20 dBi of gain. Which antenna is appropriate for the task? 

A. Yagi 

B. patch 

C. parabolic dish 

D. dipole 

E. internal omnidirectional 

Answer: C 

Q3. When Cisco AnyConnect modules are installed on a PC, which module must be installed first? 

A. telemetry 

B. web security 

C. VPN 

D. NAM 

E. DART 

F. posture 

G. CSSC 

Answer: C 

Q4. A network engineer is upgrading the WLC image through the GUI for maintenance. What three transfer methods are available? (Choose three.) 

A. FTP 

B. SNMP 

C. TFTP 

D. SFTP 

E. HTTP 

F. SMB 

G. HTTPS 

H. SCP 

Answer: A,C,D 

Q5. Mac OS X machines are having issues accessing the wireless network. While working with TAC, the administrator is asked to find the Mac laptop's wireless adapter model and driver. Where should the administrator look to find this information? 

A. About This Mac > System Report 

B. Control Panel > System 

C. System Preferences > Network > Wi-Fi Adapter > Advanced 

D. Control Panel > Networking > Adapters > Properties 

Answer: A 

Q6. Which four parameters must be configured for local EAP-FAST on the controller? (Choose four.) 

A. authority ID 

B. authority ID Information 

C. client key 

D. PAC 

E. server key 

F. TTL for PAC 

G. monitor key 

H. NTP source 

Answer: A,B,E,F 

Q7. What is the approximate time difference for a client to perform an intracontroller roam compared to an intercontroller roam? 

A. 1 ms 

B. 10 ms 

C. 20 ms 

D. 30 ms 

Answer: B 

Q8. Which information on the Monitoring page of a Cisco WLC verifies that the wireless network is operational? 

A. In the Access Point Summary section, the All APs number in the Up column is the same as in the Total column. 

B. In the Client Summary section, the Current Clients number is positive. 

C. In the Controller Summary section, the 802.11b/g Network State is shown as Enabled. 

D. In the Controller Summary section, the CPU Usage number is positive. 

Answer: A 

Q9. What three components must be the same on a controller and the RADIUS server when adding a RADIUS server to a WLC? (Choose three.) 

A. Username 

B. Shared Secret 

C. Index Priority 

D. Port Number 

E. IP Address 

F. Network Mask 

Answer: B,D,E 

Q10. Which two formats are supported for uploading background graphics to create a network map in Cisco WCS? (Choose two.) 

A. PNG 

B. JPEG 

C. DWG 

D. TIFF 

Answer: A,B