The Secret of Cisco 200-355 pdf

New Questions 3

Configurations are commonly uploaded and downloaded to a WLC.

Which options are other examples of a file that can be uploaded from a Cisco 2500 Series WLC?

A. packet capture

B. crash file

C. code

D. login banner

E. PAC

View Answer

New Questions 4

Which statement correctly describes the procedure for a lightweight AP to successfully establish a connection to a controller?

A. The AP authenticates the received Cisco WLC certificate as valid. The AP then sends its certificate to the controller.

B. The AP sends its certificate to the controller. The AP then authenticates the received

Cisco WLC certificate as valid.

C. The AP sends its certificate to the RADIUS server. The AP then authenticates the controller certificate as valid.

D. The AP sends its certificate to the RADIUS server. The AP then authenticates the RADIUS certificate as valid.

E. The AP authenticates the received RADIUS server certificate as valid. The AP then sends its certificate to the RADIUS server.

F. The AP authenticates the received RADIUS server certificate as valid. The AP then sends its certificate to the controller.

View Answer

New Questions 5

What three characteristics are components of mobility anchoring? (Choose three.)

A. enabled as a global setting

B. enabled on a per WLAN basis

C. restricts clients to a specific subnet

D. client traffic is tunneled to predefined WLC(s)

E. only one mobility anchor is allowed per WLAN

F. acts as master controller for a mobility group

View Answer

New Questions 6

The wireless network is using controller-based APs and version 7.0 MR1. The APs appear to be connected properly to the controllers. A wireless user near one of the APs reports that they are unable to connect to the network with their pre-shared key.

Which option shows the GUI path where you can check the connection status of that client?

A. WLANs > WLAN_ID > Advanced

B. Security > Clients

C. Security > Advanced > Clients

D. Monitor > Clients

E. Wireless > 802.11b/g/n > clients

View Answer

New Questions 7

Refer to the exhibit.

Which administrator role applies when the user logs into the Cisco Wireless LAN Controller?

A. ReadOnly

B. ReadWrite

C. LobbyAdmin

D. LocalAdmin

View Answer

New Questions 8

Which Extensible Authentication Protocol types are supported by the Cisco Unified Wireless Network?

A. EAP-TLS, PEAP-MSCHAPv2, and PEAP-GTC only

B. LEAP and EAP-FAST only

C. EAP-TLS, PEAP-MSCHAPv2, PEAP-GTC, LEAP, and EAP-FAST only

D. any EAP supported by the RADIUS authentication server

View Answer

New Questions 9

Which software application tool can be used for verification of signal strength?

A. inSSIDer

B. LANDnav

C. WLC-EAP

D. ICMP

View Answer

New Questions 10

Which three Cisco Unified Wireless Network capabilities use information that is provided by Radio Resource Management neighbor messages? (Choose three.)

A. aggressive load balancing

B. dynamic channel assignment

C. hybrid remote edge access point

D. inter controller mobility (that is, mobility groups)

E. over-the-air provisioning

F. rogue AP classification

View Answer

New Questions 11

In a typical wireless network using WPA, WPA2 or VPN, why is it still possible for a rogue client to launch a DOS attack?

A. WPA and WPA2 are not considered strong encryption algorithms and are easily cracked.

B. 802.11 management frames are easily compromised.

C. Cisco Compatible Extensions v5 are required with WPA, WPA2, or VPN to keep rogues from launching attacks in the wireless network.

D. The message integrity check frames are never encrypted or authenticated, which allows rogues to spoof clients.

View Answer

New Questions 12

A customer who recently implemented Mac OS X Yosemite finds that the laptops have been autonegotiating the authentication protocols when performing RADIUS authentication to Cisco Identity Services Engine. What must the administrator do to statically set the correct settings for the Mac clients?

A. Create a new network profile with the desired settings, using either the Apple iPhone Configuration Utility or Profile Manager and upload to all Mac OS X machines.

B. Set the authentication configuration to use the desired settings under the System Preferences > Network > Advanced menu.

C. Delete the SSID and have the users go through the authentication process again, this time selecting the settings during authentication.

D. Select the SSID and change the settings to the desired configuration under Control Panel > Network > Wireless Networks and export to other machines.

View Answer