A Review Of Exact 210-065 vce

Q1. A Cisco TelePresence VCS displays this alarm: "Root password is set to default." How can this security warning be addressed? 

A. Use the Cisco TelePresence VCS web user interface, choose Administration > User Settings, and change the root password. 

B. Use SSH to log in to the Cisco TelePresence VCS as Administrator and issue the command xconfig root set passwd. 

C. Use SSH to log in to the Cisco TelePresence VCS as Root, issue the command set password, and enter the new password when prompted. 

D. Use SSH to log in to the Cisco TelePresence VCS as Root, issue the command passwd, and enter the new password when prompted. 

E. Use the Cisco TelePresence VCS web user interface, choose Administration > System Settings, and change the root password. 

View Answer

Q2. Which statement is correct regarding the difference between Multisite and Multiway conferencing? 

A. Multisite requires configuration on the endpoint, whereas Multiway requires the Multiway options key to be installed. 

B. Multisite requires the presence of a multipoint control unit, whereas Multiway relies on the endpoint conferencing capability. 

C. Multisite is used to conference in multiple sites, whereas Multiway is intrasite multipoint conferencing. 

D. Multisite requires the Multisite options key to be installed and configured at the endpoint, whereas Multiway requires a Cisco TelePresence Video Communications Server and a centralized multipoint control unit. 

View Answer

Q3. Refer to the exhibit. 

An employee is reviewing the logs from a Cisco TelePresence System unit due to reports of calls being dropped. Which log entry explains the reason for the call failure? 

A. INFO Packet loss detected: 100% loss - no media stream received in the last 10 seconds 

B. INFO Jitter buffers increased 

C. INFO admin CLI login from 10.160.134.15:51151 

D. INFO Main Video stream packet loss detected on the center codec 

View Answer

Q4. Which two of these can cause registration problems for a Cisco TelePresence Codec C40 endpoint running in H.323 mode? (Choose two.) 

A. The IP default gateway address is incorrect for the endpoint. 

B. The H.323 license stack is not added to the endpoint. 

C. The MAC address for the endpoint has not been added to the Cisco TelePresence VCS. 

D. The E.164 H323Alias has not been configured on the endpoint. 

E. The URI address has not been configured on the endpoint. 

View Answer

Q5. An engineer is creating a system backup on a Cisco VCS. Which two options describe characteristics of Cisco VCS backups? (Choose two.) 

A. The backup can be sent to the remote SFTP server. 

B. The backup can be encrypted with a password. 

C. The backup can be sent to additional servers in the cluster. 

D. The backup is valid for 30 days. 

E. The backup is stored in Cisco TMS. 

F. The backup is only downloadable locally. 

View Answer

Q6. A technician is trying to pair a Touch 8 with a Cisco TelePresence SX20 endpoint, but the codec is not automatically listed in the touch panel. What are two possible reasons for this behavior? (Choose two.) 

A. The codec firmware version is below version TC 6.1. 

B. The codec and the Touch 8 are on separate subnets. 

C. Pairing visibility mode is not active on the codec. 

D. The codec is not compatible with a Touch 8 device. 

E. The Touch 8 is connected via the second Ethernet port on the codec. 

View Answer

Q7. You have been informed from the field that a new Cisco TelePresence video endpoint has been deployed with an IPv4 address of 172.28.254.45. You need to check for connectivity from the Cisco Unified Communications Manager server. Which command should be entered to check for network connectivity? 

A. utils network traceroute newsystem.domain254.local 

B. utils network ping 172.28.254.45 

C. ping 172.28.254.45 

D. traceroute 172.28.255.255 

E. utils network host cucm.osl147.local 

View Answer

Q8. Which three items should be considered when restoring a backup to a Cisco VCS Expressway? (Choose three.) 

A. A restart is required to complete the system restore process. 

B. If the backup file is encrypted, an encryption password will be needed. 

C. A valid backup configuration file must be accessible. 

D. A function SFTP server is needed for remote restore. 

E. The VCS expressway must be put into maintenance mode during the upgrade. 

F. A flash drive that is connected to the appliance can be used to restore the configuration. 

G. Cisco TMSXE can be used to process and restore backups. 

View Answer

Q9. A customer wants to record Cisco TelePresence conferences with the ability to alter the video format and add captions. Which two products are recommended to accomplish this goal? (Choose two.) 

A. Show and Share 

B. Digital Media Manager 

C. Interactive Experience Manager 

D. Media Experience Engine 

E. TelePresence Content Server 

View Answer

Q10. Refer to the exhibit. 

A network engineer is attempting to register a Cisco TelePresence endpoint to a Cisco VCS. What is the most likely cause of this failure? 

A. The lab.local SIP domain is not configured in the Cisco VCS allow list for registration. 

B. The Cisco VCS failed to bind to the LDAP server, which is where the lab.local SIP domain is learned. 

C. The lab.local SIP domain does not exist on the Cisco VCS. 

D. The endpoint does not have the proper port assignments configured for SIP signaling. 

E. The endpoint uses the TCP protocol and the Cisco VCS is configured to allow only TLS for SIP registrations. 

View Answer