All About Pinpoint 210-065 braindumps

Q1. A Unified Communications engineer wants to configure a Cisco TelePresence SX endpoint 

using static IP addressing to use a different TFTP server. Which path will allow the engineer to complete this configuration? 

A. Network Services > Network 1 > DHCP RequestTFTPServerAddress > Off 

B. Network > TFTP > DHCP RequestTFTPServerAddress > Off 

C. Network Services > TFTP > DHCP RequestTFTPServerAddress > Off 

D. Configuration > System Configuration > Provisioning > Set the External Manager Address 

View Answer

Q2. The firmware for the primary codec of a Cisco TelePresence System 3010 is being upgraded. Which codec CLI command could be used to check on the progress of the update? 

A. utils upgrade display 

B. utils system version 

C. show upgrade detail 

D. show system upgrade 

View Answer

Q3. Which three of these are functions of the Cisco TelePresence Management Suite? (Choose three.) 

A. automatic software update and release keys 

B. intelligent call routing engine 

C. provisioning a Cisco TelePresence System endpoint 

D. tracing SIP and H.323 calls 

E. managing phonebooks for endpoints that are registered to the Cisco Unified Cisco Unified Communications Manager 

F. rebooting endpoints that are registered to the Cisco TelePresence Video Communications Server 

View Answer

Q4. A video conference user that is connected via a Cisco TelePresence Codec C40 to a conference that is hosted on a Cisco TelePresence MCU 5300 would like to switch the local layout view. Which two options describe how to switch the local layout view without affecting the view of remote users? (Choose two.) 

A. Use the Administrator settings from the local touch control. 

B. Use the Participant settings from the MCU 5300 web interface. 

C. Use the Call settings from the remote control. 

D. Use the Call Control settings from the codec web interface. 

E. Use the Conference settings from the codec web interface. 

View Answer

Q5. Which Cisco Video Surveillance product contains the Cisco Video Surveillance Encoding Server? 

A. Video Communications Server 

B. Cisco Video Surveillance Operations Manager 

C. Cisco Video Surveillance Media Server 

D. Cisco Video Surveillance Transcoding and Encoding Server 

E. Cisco Video Surveillance Virtual Matrix 

View Answer

Q6. Refer to the exhibit. 

Which system tab can be used to add video infrastructure devices and endpoints? 

A. Navigator 

B. System Overview 

C. Configuration Templates 

D. Provisioning 

E. Administrative Tools 

View Answer

Q7. Which three features are supported by Cisco TMSPE? (Choose three.) 

A. Simplified provisioning 

B. LDAP user import 

C. Scheduling via Microsoft Outlook 

D. FindMe E. Jabber for Windows 

F. Automatic endpoint upgrades 

View Answer

Q8. Which four features are supported by Cisco TelePresence Server for all hardware models in remotely managed mode? (Choose four.) 

A. auto-attendant 

B. ClearPath 

C. Cluster sizes of more than 5 servers 

D. Cascading 

E. Active presence for all devices 

F. Support for Conductor 

G. Native scheduling capabilities 

View Answer

Q9. You have installed a C-Series endpoint in an office where DHCP is not supported. At a minimum, which four network items must be configured for the endpoint to be able to register with H.323 on a Cisco TelePresence Video Communication Server located at the external headquarters location? (Choose four.) 

A. unique IPv4 address 

B. subnet mask 

C. default gateway 

D. Cisco VCS IPv4 address 

E. Active Directory IPv4 address 

F. SMTP server IPv4 address 

View Answer

Q10. Which CLI command can be used to reset the Cisco TelePresence System 500-32 personal video system to a factory condition? 

A. utils factory reset 2 

B. utils system factory init 

C. xcommand defaultvalues set level: 2 

D. xconfiguration default factory 

E. utils reset factory 

F. xcommand SystemUnit FactoryReset 

View Answer