Want to know Ucertify 300 075 dump Exam practice test features? Want to lear more about Cisco Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) certification experience? Study Realistic Cisco 300 075 ciptv2 answers to Renew 300 075 ciptv2 questions at Ucertify. Gat a success with an absolute guarantee to pass Cisco cisco 300 075 (Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2)) test on your first attempt.


2026 New 300-075 Exam Dumps with PDF and VCE Free: https://www.surepassexam.com/300-075-exam-dumps.html

Q1. Refer to the exhibit 

When the Cisco Unified Communications Manager advertises the Hosted DN Pattern, which pattern would be advertised? 

A. 2XXX and the T0D1D will be 0:+498950555 

B. 2XXX and the ToDID will be 0:+4989531 21 

C. 4989S05552XXX and the ToDiD will be 0: 

D. + 4989631 21 2XXX and the ToDiD will be 0: 

E. Both +4989505552XXXand +4989531 21 2XXX will be advertised with ToDID of 0: 

Answer:

Explanation: 

Incorrect Answer: B, C, D, E PSTN failover prepend digit is +498950555 Link: 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_0_2/ccmfeat/fscallcontrol discovery.html 

Q2. Which two options are effective mechanisms to restrict the maximum number of voice calls on a WAN link? (Choose two.) 

A. Configure a gatekeeper with an SIP trunk. 

B. Configure a gatekeeper and a gatekeeper-controlled trunk in Cisco Unified Communications Manager with bandwidth control. 

C. Configure Cisco Unified Communications Manager regions. 

D. Configure Cisco Unified Communications Manager locations. 

Answer: B,D 

Q3. What are the two tasks that you must perform to configure the Service Advertisement Framework forwarder in Cisco Unified Communications Manager? (Choose two.) 

A. create VPN groups 

B. create VPN profiles 

C. create a new Service Advertisement Framework security profile 

D. set feature configuration parameters of Call Control Discovery 

E. configure Service Advertisement Framework forwarder information 

F. enable enterprise parameter for Service Advertisement Framework forwarder 

Answer: C,E 

Q4. Which sign is prefixed to the number in global call routing? 

A. -

B. + 

C. # 

D. @ 

E. & 

F. * 

Answer:

Q5. Which device is needed to integrate H.320 into the Cisco video solution? 

A. video gateway 

B. MGCP gateway 

C. H.323 gatekeeper 

D. MCU 

Answer:

Explanation: 

Incorrect Answer: A, B, D As with H.323 MCUs, H.320 gateways are provisioned in Cisco Unified CallManager as H.323 gateways, and then route patterns are configured to extend calls to these devices. 

Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/4x/42video.html#wp1046523 

Q6. Which statement about enrollment in the IP telephony PKI is true? (Source. Understanding Cisco IP Telephony Authentication and Encryption Fundamentals) 

A. CAPF enrollment supports the use of authentication strings. 

B. The CAPF itself has to enroll with the Cisco CTL client. 

C. LSCs are issued by the Cisco CTL client or by the CAPF. 

D. MICs are issued by the CAPF itself or by an external CA. 

Answer:

Explanation: 

Incorrect Answer: B, C, D 

The CAPF enrollment process is as follows: 

1. The IP phone generates its public and private key pairs. 

2. The IP phone downloads the certicate of the CAPF and uses it to establish a TLS session with the CAPF. 

3. The IP phone enrolls with the CAPF, sending its identity, its public key, and an optional authentication string. 

4. The CAPF issues a certicate for the IP phone signed with its private key. 

5. The CAPF sends the signed certicate to the IP phone. 

Link: http://my.safaribooksonline.com/book/certification/cipt/9781587052613/understanding-cisco-ip-telephony-authentication-and-encryption-fundamentals/584. 

Q7. Refer to the following exhibits. 

Users in the U.S dial Germany by calling 9011 49 followed by the remaining digits. What would be the most suitable configuration for Connection X? 

A. Configure a SIP trunk to 10.140.1.1 and a SIP route pattern +49T in Cisco Unified Communications Manager. 

B. Configure a SIP trunk to the Cisco Unified Border Element and route pattern +49T in Cisco Unified Communications Manager. 

C. configure a SIP trunk to the Cisco Unified Border Element. Configure a translation pattern for 9011.49T using DDI Predot prefix + and CSS to point to a route pattern partition +! which uses the SIP trunk. 

D. Configure a SIP trunk to the ITSP. Configure a translation pattern for 9011.49T using DDI predot prefix + and CSS to point to a route pattern partition +! which uses the SIP trunk. 

Answer:

Explanation: 

Incorrect Answer: A, B, D SIP trunks for public switched telephone network (PSTN) access are an important new access method for business collaboration. Service providers throughout the world offer SIP trunking as an alternative to traditional TDM (T1/E1) connections. A discard digits instruction (DDI) removes a portion of the dialed digit string before passing the number on to the adjacent system. A DDI must remove portions of the digit string, for example, when an external access code is needed to route the call to the PSTN, but the PSTN switch does not expect that access code. 

Link: https://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a03rp.html 

Q8. How many active gatekeepers can you define in a local zone? 

A. 1 

B. 2 

C. 5 

D. 10 

E. 15 

F. unlimited 

Answer:

Q9. Which two options enable routers to provide basic call handling support for Cisco Unified IP Phones if they lose connection to all Cisco Unified Communications Manager systems? 

(Choose two.) 

A. SCCP fallback 

B. Cisco Unified Survivable Remote Site Telephony 

C. Cisco Unified Communications Manager Express 

D. MGCP fallback 

E. Cisco Unified Communications Manager Express in SRST mode 

Answer: B,E 

Q10. Which two configurations are needed to implement SRST in Cisco Unified Communications Manager? (Choose two.) 

A. SRST Gateway setting in Cisco Unified Communications Manager 

B. SRST Reference configured in Cisco Unified Communications Manager 

C. Device Pool SRST Reference setting 

D. Call Manager Group setting 

E. Cisco Unified Communications Locations setting 

Answer: B,C