VMware 2V0-622 Exam Questions and Answers 2021

NEW QUESTION 1
Which is the block size on the VMFS6 datastore?

• A. All small and large file blocks are 8MB.
• B. All small and large file blocks are 1MB.
• C. Small file blocks are 512K
• D. large file blocks are 64MB.
• E. Small file blocks are 1MB, large file blocks are 512MB.

Answer: D

NEW QUESTION 2
A vSphere administrator wants to upgrade NFS3 datastores to NFS4.1 on ESXi 6.5 hosts with running production virtual machines.
Which option is valid?

• A. Run ESXi command to upgrade the datastore.
• B. Unmount the datastore from a single host, then mount it as NFS 4.1 datastore, and repeat this one host at a time until the mount has been upgraded on all hosts.
• C. Create a new NFS 4.1 datastore, and then use Storage vMotion to migrate virtual machines from the old datastore to the new one.
• D. Right click the datastore and upgrade it as a NFS 4.1 datastore.

Answer: C

NEW QUESTION 3
In what two ways can Storage DRS load balance virtual machines? (Choose two).

• A. virtual storage controller
• B. I/O latency
• C. anti-affinity rules
• D. guest OS family

Answer: BC

NEW QUESTION 4
Which three are supported upgrade processes for ESXi host? (Choose three.)

• A. using vSphere Auto Deploy
• B. using a TFTP server
• C. using Update Manager
• D. using an ESXCLI command
• E. installing from CIFS share

Answer: ACD

NEW QUESTION 5
Which system traffic type cannot be configured with Network I/O Control (NIOC) bandwidth allocation?

• A. Virtual SAN traffic
• B. ESXi host Management traffic
• C. vSphere Replication traffic
• D. Software FCoE Adapter traffic

Answer: D

Explanation: You can use NIOC to assign bandwidth for host management, virtual machines, iSCSI storage, NFS storage, vSphere vMotion, vSphere Fault Tolerance, vSAN, and vSphere Replication on the physical adapters that are connected to a vSphere Distributed Switch but not Fcoe Adapter traffic.

NEW QUESTION 6
A vSphere content library administrator is attempting to unpublish the content library, but the option is grayed out as shown in the Exhibit.

Which statement identifies the reason for not being able to unpublish?

• A. Underlying storage for this content library is not accessible.
• B. A synchronization operation is in progress with this content library.
• C. This content library is optimized for syncing over HTTP.
• D. There are active subscriptions on this content library.

Answer: C

NEW QUESTION 7
In vSphere Data Protection 6.1, which is the function of a Backup Verification job?

• A. Non
• B. Backup Verification job is not a feature of vSphere Data Protection
• C. It is a manual task- Power it on- Verify the guest OS- Check started applications
• D. It is an automatic process- Restore a virtual machine- Power it on- Verify that the guest OS is booted by communicating with the Backup Verification agent
• E. It is an automatic process- Restore a virtual machine- Power it on- Verify that the guest OC is booted by detecting the VMware ToolsTM “heartbeats”

Answer: D

Explanation: Automated Backup Verification
Backup Verification jobs can be created in vSphere Data Protection. These jobs automate the process of restoring a virtual machine: powering it on; verifying the guest OS booted, by detection of VMware Tools “heartbeats”.

NEW QUESTION 8
Which feature of vSphere networking protects hosts from losing connection to vCenter Server as a result of misconfiguration of the management network?

• A. NIC Teaming
• B. Private VLAN
• C. Rollback
• D. Health Check

Answer: C

Explanation: By rolling configuration changes back, vSphere protects hosts from losing connection to vCenter Server as a result from misconfiguration of the management network.

NEW QUESTION 9
When using “Cluster resource percentage” for host failover capacity in vSphere HA Admission Control, the total resource requirements are calculated from which two values? (Choose two.)

• A. Total vCPUs assigned to each VM.
• B. Average CPU usage on each VM over time.
• C. Memory reservations on each VM.
• D. Total memory assigned to each VM.
• E. Average active memory on each VM over time.
• F. CPU reservations on each VM.

Answer: CF

NEW QUESTION 10
Which three options are available for remediation with Proactive HA? (Choose three.)

• A. Quarantine mode for moderate and Power off for severe failure.
• B. Quarantine mode for all failures.
• C. Power off for all failures.
• D. Quarantine mode for moderate and Maintenance mode for severe failure.
• E. Maintenance mode for all failures.

Answer: BDE

NEW QUESTION 11
DRS is set to Fully-Automated mode and seems to be migrating virtual machines too frequently. Which action can potentially decrease the amount of automated migrations performed by DRS?

• A. Increase the Migration Threshold by moving the slider to the right.
• B. Decrease the Migration Threshold by moving the slider to the left.
• C. Set DRS to Partially-Automated mode.
• D. Enable EVC for the cluster.

Answer: B

NEW QUESTION 12
What new feature was introduced to the Content Library in vSphere 6.5?

• A. Mount an ISO directly from the Content Library.
• B. Deploy a virtual machine from an OVF Package in a Content Library.
• C. Upload a File from a URL to a Library Item.
• D. Upload a File from a Local System to a Library Item.

Answer: A

Explanation: Content Libraries in vSphere 6.5, which has additional features including the option to mount an ISO from a Content Library, update existing templates, and apply guest OS Customisation Specifications during VM deployments.
https://esxsi.com/2021/12/30/content-libraries/

NEW QUESTION 13
Which three operations can cause VMFS metadata updates? (Choose three.)

• A. Restarting a VM using the guest OS.
• B. Launching a VM console.
• C. Migrating a VM with vMotion.
• D. Powering a VM on or off.
• E. Expanding a VMFS datastore.

Answer: CDE

Explanation: Metadata is updated each time you perform datastore or virtual machine management operations. Examples of operations requiring metadata updates include the
following:
Creating, growing, or locking a virtual machine file Changing a file's attributes
Powering a virtual machine on or off Creating or deleting a VMFS datastore Expanding a VMFS datastore Creating a template
Deploying a virtual machine from a template Migrating a virtual machine with vMotion Reference:
https://pubs.vmware.com/vsphere-50/index.jsp?topic=%2Fcom.vmware.vsphere.storage.doc_50%2FGUID-7A3 51E26A4761AA.html

NEW QUESTION 14
How can failback of a recovered virtual machine in vSphere Replication be performed?

• A. No action required, because failback is automatically performed to the source site.
• B. Configure a new replication in the reverse machine at the target site.
• C. Power off and unregister the virtual machine on the target site.
• D. Disable or Stop the virtual machine replication on the source site.

Answer: B

Explanation: Failback of Virtual Machines in vSphere Replication
Failback of virtual machines is a manual task in a vSphere Replication.
After performing a successful recovery from the primary site to the secondary site, you can perform failback. You manually configure a new replication in the reverse direction, that is, from the secondary site to the primary site. The disks of the primary site are used as replication seeds, so that vSphere Replication only synchronizes the changes made to the .vmdk files. Before you configure the reverse replication, you must manually unregister the virtual machine from the inventory on the primary site.

NEW QUESTION 15
Which is required by vCenter Converter Standalone to convert a physical Red Hat Enterprise Linux 7 machine to a virtual machine?

• A. The Linux machine must be powered off.
• B. The Linux machine must have the SSH daemon started.
• C. The Linux machine must use a static IP address.
• D. The Linux machine must have a fully-qualified domain name.

Answer: B

Explanation: Ports used when converting a powered on machine running Linux
Table contains a list of the ports that must be open during the conversion of powered on source machines running Linux.

NEW QUESTION 16
When performing a vCenter Server 5.5 for Windows with Microsoft SQL Server Express database migration to vCenter Server Appliance 6.5, which will be the target database?

• A. Microsoft SQL Server Express 2012R2
• B. Microsoft SQL Server Standard 2012R2
• C. PostgreSQL
• D. Oracle DB 11g

Answer: C

Explanation: To perform vcenter server 5.5 for Windows with Microsoft SQL server express database migration to vcenter server appliance 6.5, you need PostgreSQL database installation on Windows.