2026 New 2V0-622 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/2V0-622/

for VMware certification, Real Success Guaranteed with Updated . 100% PASS 2V0-622 VMware Certified Professional 6.5 - Data Center Virtualization exam Today!

VMware 2V0-622 Free Dumps Questions Online, Read and Test Now.

NEW QUESTION 1
2V0-622 dumps exhibit
Examine the LUN properties that are shown in the exhibit. Which action should be taken to utilize all active paths?

  • A. Change PSP to Most Recently Used
  • B. No action require
  • C. All paths are already utilized.
  • D. Change PSP to Fixed.
  • E. Change PSP to Round Robin.

Answer: D

Explanation: The host uses an automatic path selection algorithm rotating through all active paths when connecting to active-passive arrays, or through all available paths when connecting to active-active arrays. RR is the default for a number of arrays and can be used with both active-active and active-passive arrays to implement load balancing across paths for different LUNs.

NEW QUESTION 2
The networking team has requested to have a dedicated network for iSCSI traffic. This task has been assigned to the vSphere Administrator.
What is the VMware-recommended way to accomplish this?

  • A. Create a custom IP Stack.
  • B. Configure the right subnet.
  • C. Configure Static Routes on each ESXi Server.
  • D. Define a dedicated gateway for the iSCSI vmkernel.

Answer: C

NEW QUESTION 3
A vCenter Server virtual machine runs on ESXi host "Alpha 1." That host network is configured with vSphere Standard Switch and an administrator wants to migrate the host to a vSphere Distributed Switch.
The host has only one physical NIC, and the migration fails.
Which parameter should be changed in vCenter to accomplish the migration?

  • A. Set the ESXi Host Advanced Setting config.vpxd.network.rollback to FALSE.
  • B. Set the vCenter Server Advanced Setting config.vpxd.network.rollback to TRUE.
  • C. Set the ESXi Host Advanced Setting config.vpxd.network.rollback to TRUE.
  • D. Set the vCenter Server Advanced Setting config.vpxd.network.rollback to FALSE.

Answer: D

NEW QUESTION 4
Which two tasks should a vSphere administrator perform if the vmJc«rn«l log reports VMFS metadata errors? (Choose two.)

  • A. reformat the datastore
  • B. ignore the messages
  • C. contact VMware technical support
  • D. check the device with VOMA

Answer: CD

Explanation: https://docs.vmware.com/en/VMware-vSphere/6.0/com.vmware.vsphere.troubleshooting.doc/GUID-6F991DB5 VOMA = vSphere On-disk Metadata Analyser (dentify and fix incidents of metadata corruption that affect file
systems or underlying logical volumes)
ProblemYou might need to check metadata consistency of a file system or a logical volume backing the file system when you experience problems with various functionalities on a VMFS datastore or a virtual flash resource. For example you might want to perform a metadata check if one of the following occurs:
You experience storage outages.
After you rebuild RAID or perform a disk replacement. You see metadata errors in the vmkernel.log file.
You are unable to access files on a VMFS.
You see corruption being reported for a datastore in events tabs of vCenter Server.
ResultsTo check metadata consistency, run VOMA from the CLI of an ESXi host. VOMA can be used to check and fix metadata inconsistency issues for a VMFS datastore or a virtual flash resource. To resolve errors reported by VOMA, consult VMware Support.

NEW QUESTION 5
A vSphere Administrator has VM Component Protection (VMCP) enabled, but the VM was not restarted when one of the VMFS datastores experienced an All Paths Down (APD) failure.
What two scenarios would explain why the virtual machine was not restarted? (Choose two.)

  • A. Insufficient Capacity is available on the failover ESXi hosts.
  • B. VM Monitoring is required in order for VMCP to failover during an APD event.
  • C. VMware Tools is not installed on the guest operating system for the VM.
  • D. The APD failure was corrected before the VM could be restarted.

Answer: AD

NEW QUESTION 6
An administrator sets the Failover Capacity for both CPU and Memory at 25%. Based on the Exhibit below, how much of the cluster's total CPU resources are still available to power on additional virtual machines?
2V0-622 dumps exhibit

  • A. 45%
  • B. 60%
  • C. 70%
  • D. 25%

Answer: A

Explanation: The way that Current Failover Capacity is calculated and used with this admission control policy is shown with an example. Make the following assumptions about a cluster: The cluster is comprised of three hosts, each with a different amount of available CPU and memory resources. The first host (H1) has 9GHz of available CPU resources and 9GB of available memory, while Host 2 (H2) has 9GHz and 6GB and Host 3 (H3) has 6GHz and 6GB. There are five powered-on virtual machines in the cluster with differing CPU and memory requirements. VM1 needs 2GHz of CPU resources and 1GB of memory, while VM2 needs 2GHz and 1GB, VM3 needs 1GHz and 2GB, VM4 needs 1GHz and 1GB, and VM5 needs 1GHz and 1GB. The Configured Failover Capacity is set to 25%.Admission Control Example with Percentage of Cluster Resources Reserved Policy
The total resource requirements for the powered-on virtual machines is 7GHz and 6GB. The total host
resources available for virtual machines is 24GHz and 21GB. Based on this, the Current CPU Failover Capacity is 70% ((24GHz – 7GHz)/24GHz). Similarly, the Current Memory Failover Capacity is 71% ((21GB-6GB)/21GB).Because the cluster’s Configured Failover Capacity is set to 25%, 45% of the cluster’s total CPU resources and 46% of the cluster’s memory resources are still available to power on additional virtual machines.

NEW QUESTION 7
What configuration option would ensure that a virtual NUMA topology is defined on VMs having more than eight virtual CPUs?

  • A. cupid.coresPerSocket
  • B. numa.vcpu.maxPerVirtualNode
  • C. numa.vcpu.min
  • D. numa.vcpu.followcoresocket

Answer: B

NEW QUESTION 8
An administrator is configuring vCenter HA and considering placing the Passive and Witness nodes in another datacenter from the Active Node.
Which is the maximum supported latency between the vCenter HA nodes?

  • A. 5ms
  • B. 10ms
  • C. 100ms
  • D. 30ms
  • E. 50ms

Answer: B

Explanation: vCenter HA network latency between Active, Passive, and Witness nodes must be less than 10 ms. References:

NEW QUESTION 9
A VM folder contains VM1 and VM2.
• Group A has permission to power on virtual machines, defined on the VM folder and its children.
• Group B has permission to power off virtual machines, defined on the VM folder and its children.
If a user is a member of Groups A and B, what will be the user's effective permission on VM1 and VM2?

  • A. Power on.
  • B. Power off.
  • C. Power on and Power off.
  • D. Reset.

Answer: C

NEW QUESTION 10
Which is the maximum number of block devices (LUNs) that are supported by ESXi hosts that are running version 6.5?

  • A. 1024
  • B. 512
  • C. 2048
  • D. 256

Answer: B

NEW QUESTION 11
An Administrator for a new vCenter Server HA deployment has an infrastructure that is using an external Platform Services Controller (PSC).
Which three Load Balancers are supported by VMware? (Choose three.)

  • A. Windows network Load Balancer
  • B. F5 BIG-I
  • C. VMware NSX EDGE
  • D. Citrix Netscaler
  • E. Linux HA Proxy

Answer: BCD

NEW QUESTION 12
Which two statements are true when vSAN & vSphere HA are enabled in the same cluster? (Choose two.)

  • A. Any vSAN datastore mounted on more than one host can be used as a Heartbeat datastore.
  • B. The vSAN storage network is used for vSphere HA traffic.
  • C. The Management network is used for vSphere HA traffic.
  • D. Any datastore mounted on more than one host can be used as a Heartbeat datastore, except vSAN datastores.
  • E. Any datastore mounted on more than one host can be used as a Heartbeat datastore.

Answer: BD

NEW QUESTION 13
Which is the minimum vSphere Distributed Switch version needed to support Network Health Check?

  • A. 6.5
  • B. 5.1
  • C. 4.1
  • D. 5.5

Answer: B

NEW QUESTION 14
vSphere Data Protection 6.1 provides the ability to back up and restore individual applications. Which are the three supported applications? (Choose three.)

  • A. Microsoft Dynamics Server
  • B. Oracle Database Server
  • C. Microsoft SharePoint Server
  • D. Microsoft Exchange Server
  • E. Microsoft SQL Server

Answer: CDE

NEW QUESTION 15
An administrator sees the following error in the log files:
2V0-622 dumps exhibit
Which two events could be the source of the error message? (Choose two.)

  • A. vCenter Server failure
  • B. VXLAN failure
  • C. Disk array failure
  • D. Network failure
  • E. ESXi host failure

Answer: CD

NEW QUESTION 16
Which are two Storage DRS requirements? (Choose two.)

  • A. Datastore clusters must have datastores of the same size and I/O capacities.
  • B. NFS and VMFS datastores cannot be combined in the same datastore cluster.
  • C. Datastores shared across multiple datacenters cannot be included in a datastore cluster.
  • D. NFS and vSAN datastores can be combined in the same datastore clusters.
  • E. A dedicated TCP/IP stack is required for datastore clusters.

Answer: BC

100% Valid and Newest Version 2V0-622 Questions & Answers shared by 2passeasy, Get Full Dumps HERE: https://www.2passeasy.com/dumps/2V0-622/ (New 276 Q&As)