VMware 2V0-622 Free Practice Questions 2021

NEW QUESTION 1
An administrator is creating VMkernel adapters on an ESXi 6.5 host and wants to create separate VMkernel adapters for every type of traffic in the default TCP/IP stack.
Which three types of traffic can be explicitly enabled on a separate VMkernel adapter? (Choose three.)

• A. Virtual SAN traffic
• B. NFS traffic
• C. vMotion traffic
• D. vSphere HA traffic
• E. Fault Tolerance logging traffic

Answer: ACE

Explanation:

NEW QUESTION 2
Which is the correct order for upgrading vSphere components?

• A. vCenter Server, ESXi hosts, VMware Tools, Virtual Machine hardware
• B. VMware Tools, Virtual Machine hardware, ESXi hosts, vCenter Server
• C. vCenter Server, Virtual Machine hardware, VMware tools, ESXi hosts
• D. ESXi hosts, vCenter Server, Virtual Machine hardware, VMware Tools

Answer: A

Explanation: Correct order is:
1 Back up your configuration 2 Upgrade vCenter Server
3 Upgrade ESXi hosts
4 Upgrade virtual machines and virtual appliances

NEW QUESTION 3
Where would a vSphere administrator find general vCenter Server logs on a vCenter Server Appliance?

• A. /var/log/vmware/vpxd/
• B. /var/log/messages
• C. /etc/vmware-vpx/
• D. /var/log/vmware/vsan-health/

Answer: A

Explanation: The VMware vCenter Server Appliance 6.0 logs are located in the /var/log/vmware/ folder. vpxd/vpxd.log –> The main vCenter Serverlog

NEW QUESTION 4
In a vSphere 6.5 cluster, the administrator notices that it is possible to set a percentage in the DRS option, “Control CPU over-commitment in the cluster.”
Which is the purpose of this setting?

• A. It sets and enforces a maximum percentage of virtual machine CPU usage in GHz in comparison to physical CPU availability in GHz.
• B. It sets and enforces a maximum ratio in percentage between powered on virtual machine CPUs and available physical CPUs on hosts.
• C. It prevents the creation of any additional virtual machines in the cluster.
• D. It calculates the total shares assigned to all virtual machines in comparison to GHz of available physical CPU.

Answer: B

Explanation: https://blogs.vmware.com/vsphere/2021/10/whats-new-in-vsphere-6-5-host-resource-management-and-operation over-commitment: This is an option to enforce a maximum vCPU:pCPU ratios in the cluster. Once the cluster reaches this defined value, no additional VMs will be allowed to power on."

NEW QUESTION 5
Which two clients could an Administrator use to add a new identity source to the vCenter Single Sign-On domain? (Choose two.)

• A. vSphere Client
• B. Platform Services Controller Web Interface
• C. vSphere Appliance Management Interface
• D. vSphere Web Client
• E. VMware Host Client

Answer: BC

NEW QUESTION 6
Which three source object types are available for subscription when creating a subscripted content library in vSphere 6.5? (Choose three.)

• A. CIFS repository
• B. vSphere 6 library
• C. HTTP server
• D. vCD 5.5 catalog
• E. 3rd-party library

Answer: BDE

NEW QUESTION 7
A vSphere administrator upgraded vCenter Server (VC) from version 5.5 to 6.5. Existing VMFS5 datastores consumption is 75% full. All of the ESXi hosts have been upgraded to version 6.5. Existing datastores have not yet been upgraded.
Which is VMware’s recommended approach to upgrading each VMFS5 datastore to VMFS6?

• A. The option to upgrade datastores to VMFS6 is only available during the ESXi host upgrade process.
• B. Log on one ESXi host at a time using vSphere 6.5 Windows Clien
• C. Navigate to the datastores view.Right-click on the VMFS5 datastore, and then select upgrade to VMFS6.
• D. Log on to VC using vSphere 6.5 Web Clien
• E. Navigate to the datastores vie
• F. Right-click on the VMFS5 datastore, and then select upgrade to VMFS6.
• G. Log on to VC using vSphere 6.5 Web Clien
• H. Create a VMFS6 datastore on a new LU
• I. Use storage vMotion to migrate the data to the new datastore.

Answer: D

Explanation: Perform version check for the vCenter Server and all ESX hosts.
Note: All ESXi hosts and vCenter Server must be of vSphere 6.5. Do not proceed if any one of ESXi hosts is not vSphere 6.5. Proceeding further means business continuity loss and the new datastore is not visible in old ESX hosts.
Perform all pre checks for free space availability on datastore DS-2. Available space on DS-2 must be equal or more than the datastore DS-1 space.
Ensure that the datastore DS-2 is VMFS 6 type.
Prepare list of all virtual machines in the vCenter Server’s inventory that are hosted on datastore DS-1. Evacuate the datastore DS-1. For this, migrate all the virtual machines running from datastore DS-1 to
datastore DS-2. Storage vMotion operations are performed on these virtual machines.
Perform one migration at a time to avoid disrupting the performance of remaining datacenter entities. Keep track of any migration failures, if any, re-trigger the migration for those virtual machines.
Ensure that datastore DS-1 is empty by listing files on this datastore. Note: Proceed further only if datastore DS-1 is empty.
Unmount datastore DS-1 from all ESX hosts. Delete datastore DS-1.
Create a new datastore with the VMFS 6 filesystem using the same lun. For example, DS-1.
Trigger a storage rescan operation on all hosts and wait for few minutes for this operation to complete.
Move all virtual machines back to datastore DS-1 from datastore DS-2 by performing storage vMotion operation. It is suggested to migrate one virtual machine at a time. Keep track of any migration failures, if any, re-trigger migration for those virtual machines.

NEW QUESTION 8
An administrator is attempting to power on a virtual machine with 32GB of memory. The operation fails with the following error:
Could not power on VM: No space left on device
Checking the space on the virtual machine’s datastore, there is 30GB free. Which action would allow the VM to power on?

• A. Set a 2GB memory reservation on the VM.
• B. Mount the virtual disk from the affected VM on to another virtual machine and free up space from within the OS.
• C. Enable vSphere HD admission control on the cluster in which the VM resides.
• D. Set a 2GB memory limit on the VM.

Answer: A

Explanation: The swap file size can be calculated with the formula (.vswp File = Allocated Memory - Memory Reservation).
As per default, the reservation is set to 0, so the .vswp file size is equal to the amount of virtual memory.

NEW QUESTION 9
What are three benefits of using a few large-capacity LUNs instead of many small-capacity LUNs? (Choose three.)

• A. More flexibility to create virtual machines without adding new LUNs.
• B. More flexibility for resizing virtual disks.
• C. Less wasted storage space.
• D. Better performance because there is less contention for a single volume.
• E. Fewer VMFS datastores to manage.

Answer: ABE

Explanation: You might want fewer, larger LUNs for the following reasons:

NEW QUESTION 10
Which are three prerequisites for using UEFI secure boot? (Choose three.)

• A. Virtual machine with EFI firmware
• B. Virtual Hardware version 12
• C. Virtual Machine with BIOS firmware version 6
• D. Virtual Hardware version 13
• E. Operating system that supports UEFI secure boot

Answer: ADE

Explanation: Verify that the virtual machine operating system and firmware support UEFI boot. EFI firmware
Virtual hardware version 13 or later.
Operating system that supports UEFI secure boot.
You need VirtualMachine.Config.Settings privileges to enable or disable UEFI secure boot for the virtual machine.
https://docs.vmware.com/en/VMware-vSphere/6.5/com.vmware.vsphere.security.doc/GUID-898217D4-689D-4

NEW QUESTION 11
Which three conditions could result in VMware Flash Read Cache being unable to claim a disk? (Choose three.)

• A. The disk is not listed in the VMware hardware compatibility guide.
• B. The disk is not detected as local.
• C. The disk is not detected as an SSD.
• D. The disk is in use by VMFS.

Answer: BCD

NEW QUESTION 12
Virtual machines that are known to run read-intensive applications have begun to underperform. Which action can improve performance?

• A. Enable vFlash Read Cache.
• B. Migrate virtual machines to a VMFS6 datastore.
• C. Ensure that DRS is in manual mode.
• D. Disable virtual machine encryption.

Answer: A

NEW QUESTION 13
When using VMware Converter to import a Windows server and improve the consistency of the destination virtual machine, which optional step can be performed immediately prior to powering down the source server?

• A. Uninstall production applications.
• B. Perform a final synchronization task.
• C. Remove the server from the Active Directory domain.
• D. Remove the server from the network.

Answer: B

NEW QUESTION 14
An administrator has recently upgraded from vSphere 6.0 to 6.5, and can no longer see the software iSCSI named vmhba33.
Which could be the reason for this?

• A. The upgrade has changed the vmhba name.
• B. vSphere 6.5 automates iSCSI configurations.
• C. vSphere 6.5 no longer supports software iSCSI.
• D. The upgrade has deleted the vmhba.

Answer: A

NEW QUESTION 15
Using the vCenter Server Appliance 6.5, which two tools can be used to manage Auto Deploy deploy rules? (Choose two.)

• A. PowerCLI
• B. Plug-Ins available in the vCenter Server Appliance Shell
• C. vSphere Appliance Management UI
• D. vCenter Server Appliance BASH Shell
• E. Auto Deploy GUI in the vSphere Web Client

Answer: AE

Explanation: https://blogs.vmware.com/vsphere/2015/05/configure-auto-deploy-rules-powercli.html
http://www.enterprisedaddy.com/2021/12/vsphere-6-5-auto-deploy-on-vcenter-server-6-5/

NEW QUESTION 16
When migrating a Windows vCenter Server 6.0 to the vCenter Server Appliance 6.5, which two will be migrated by default? (Choose two.)

• A. Local Windows OS users and groups
• B. Configuration
• C. Custom ports
• D. FQDN
• E. Historical and Performance data

Answer: BD

Explanation: Not correct:
A) Local Windows OS users and groups are not migrated to the Photon OS of the vCenter Server Appliance 6.5.
C) Migration of deployments that use custom ports for services other than Auto Deploy, Update Manager, and vSphere ESXi Dump Collector are not supported.
E) By default, the configuration and inventory data of the Windows vCenter Server is migrated. The option to copy historical and performance data is also available.