Pass4sure 300 075 vce Questions are updated and all 300 075 dump answers are verified by experts. Once you have completely prepared with our 300 075 ciptv2 exam prep kits you will be ready for the real 300 075 dump exam without a problem. We have Renewal Cisco 300 075 vce dumps study guide. PASSED 300 075 dump First attempt! Here What I Did.


2026 New 300-075 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/300-075/

Q1. Which two statements regarding you configuring a traversal server and traversal client relationship are true? (Choose two.) 

A. VCS supports only the H.460.18/19 protocol for H.323 traversal calls. 

B. VCS supports either the Assent or the H.460.18/19 protocol for H.323 traversal calls. 

C. VCS supports either the Assent or the H.460.18/19 protocol for SIP traversal calls. 

D. If the Assent protocol is configured, a TCP/TLS connection is established from the traversal client to the traversal server for SIP signaling. 

E. A VCS Expressway located in the public network or DMZ acts as the firewall traversal client. 

Answer: B,D 

Q2. Refer to the exhibit. 

When a call between two HQ users is being conferenced with a remote user at BR, which configuration is needed? 

A. The BR_MRG must contain the transcoder device. The BR_MRGL must be assigned to the BR phones. 

B. The HQ_MRG must contain the transcoder device. The HQ_MRGL must be assigned to the HQ phones. 

C. A transcoder should be configured at the remote site and assigned to all remote phones through the BR_MRGL. 

D. The HQ_MRG must contain the transcoder device. The HQ_MRGL must be assigned to the software conference bridge. 

E. Enable the software conference bridge to support the G.711 and G.729 codecs in Cisco Unified Communications Manager Service Parameters. 

Answer: D 

Q3. If your IP telephony administrator asks you to configure a local zone for your dial plan to control the volume of calls between two end points in a centralized multisite environment, which two types of Call Admission Control can be implemented? (Choose two.) 

A. locations based 

B. automated alternate routing 

C. gatekeeper based 

D. SRST 

E. Cisco Unified Communications Manager based 

Answer: A,B 

Explanation: 

Incorrect Answer: C, D, E Location-based call admission control (CAC) manages WAN link bandwidth in Cisco Unified Communications Manager. Automated alternate routing (AAR) provides a mechanism to reroute calls through the PSTN or other network by using an alternate number. Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a02cac.html #wp1067747 

Q4. Scenario There are two call control systems in this item. The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 7965 and 9971 Video IP Phones. The Cisco VCS and TMS control the Cisco TelePresence Conductor, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows. 

Use the exhibits to answer the following questions. 

DNS Servers 

Device Pool 

Expressway 

ILS 

Locations 

MRA 

Speed Dial 

SIP Trunk 

The intercluster URI call routing no longer allows calls between sites. What is the reason why this would happen? (Choose two) 

A. Wrong SIP domain configured. 

B. User is not associated with the device. 

C. IP or DNS name resolution issue. 

D. No SIP route patterns for cisco.lab exist. 

Answer: C,D 

Q5. On which two call legs is the media encryption enforced in a Collaboration Edge design? (Choose two.) 

A. Expressway-C to Cisco Unified Communications Manager 

B. Expressway-C to Expressway-E 

C. Expressway-E to outside-located endpoint 

D. Expressway-E to Cisco Unified Communications Manager 

E. Expressway-C to internal endpoint 

Answer: B,C 

Q6. Company X has a Cisco Unified Communications Manager cluster and a VCS Control server with video endpoints registered on both systems. Users find that video endpoints registered on Call manager can call each other and likewise for the endpoints registered on the VCS server. The administrator for Company X realizes he needs a SIP trunk between the two systems for any video endpoint to call any other video endpoint. Which two steps must the administrator take to add the SIP trunk? (Choose two.) 

A. Set up a SIP trunk on Cisco UCM with the option Device-Trunk with destination address of the VCS server. 

B. Set up a subzone on Cisco UCM with the peer address to the VCS cluster. 

C. Set up a neighbor zone on the VCS server with the location of Cisco UCM using the menu option VCS Configuration > Zones > zone. 

D. Set up a SIP trunk on the VCS server with the destination address of the Cisco UCM and Transport set to TCP. 

E. Set up a traversal subzone on the VCS server to allow endpoints that are registered on Cisco UCM to communicate. 

Answer: A,C 

Q7. Which statement about H.323 Gatekeeper Call Admission Control is true? 

A. Gatekeeper Call Admission Control applies to centralized Cisco Unified Communications deployments that use locations based Call Admission Control. 

B. Gatekeeper Call Admission Control applies to distributed Cisco Unified Communications deployments. 

C. Gatekeeper Call Admission Control applies only to distributed Cisco Unified Communications Express deployments. 

D. Gatekeeper Call Admission Control setting is configured in Cisco Unified Communications Manager. 

Answer: B 

Explanation: 

Incorrect Answer: A, C, D in distributed call processing deployments on a simple hub-and-spoke topology, you can implement call admission control with a Cisco IOS gatekeeper. In this design, the call processing agent (which could be a Unified CM cluster, Cisco Unified Communications Manager Express (Unified CME), or an H.323 gateway) registers with the Cisco IOS gatekeeper and queries it each time the agent wants to place an IP WAN call. Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/7x/cac.html#wp1044743 

Q8. Which action configures CAC utilizing only Cisco Unified Communications Manager software? 

A. Configure Cisco Unified Communications Manager regions. 

B. Configure Cisco Unified Communications Manager locations. 

C. Configure Cisco Unified Communications Manager RSVP-enabled locations. 

D. Configure Cisco Unified Communications Manager MTPs. 

Answer: B 

Q9. When a SIP trunk is added for Call Control Discovery, which statement is true? 

A. The SIP trunk is added by selecting SIP Trunk and SIP Protocol. The Enable SAF check box should be selected. 

B. The SIP trunk is added by selecting SIP Trunk and SIP Protocol. The Trunk Service Type should be Call Control Discovery. 

C. The SIP trunk is added by selecting Call Control Discovery Trunk and then selecting SIP as the protocol to be used. 

D. The SIP trunk is added by selecting SIP Trunk and SIP Protocol. The destination IP address field is configured as ‘SAF’ to indicate that this trunk is used for SAF. 

Answer: B 

Q10. Which three commands are mandatory to implement SRST for five Cisco IP Phones? (Choose three.) 

A. call-manager-fallback 

B. max-ephones 

C. keepalive 

D. limit-dn 

E. ip source-address 

Answer: A,B,E