What 100% Guarantee 300-075 exam question Is?

Q1. Scenario 

There are two call control systems in this item. The Cisco UCM is controlling the Cisco Jabber for Windows Client, and the 7965 and 9971 Video IP Phone. The Cisco VCS is controlling the SX20, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows. 

Use the exhibits to answer the following questions. 

DP 

Locations 

CSS 

Movi Failure 

Movi Settings 

CIPTV Topo 

Subzone 

Links 

Pipe 

What two issues could be causing the Cisco Jabber Video for TelePresence failure shown in the exhibit? (Choose two.) 

A. Incorrect username and password 

B. Wrong SIP domain configured. 

C. User is not associated with the device. 

D. IP or DNS name resolution issue. 

E. CSF Device is not registered. 

F. IP Phone DN not associated with the user. 

View Answer

Q2. Company X has three locations connected via a low bandwidth WAN. Which two configurations are required in the Cisco Unified Communications Manager regions to provide the most suitable use of bandwidth while preserving the call quality? (Choose two.) 

A. g729 codec for intraregion calling 

B. g722/g711 codec for interregion calling 

C. g729 codec for interregion calling 

D. g722/g711 for intraregion calling 

E. g729 codec for all calling 

F. g722/g711 codec for all calling 

View Answer

Q3. Which system configuration is used to set audio codecs? 

A. region 

B. location 

C. physical location 

D. licensing 

View Answer

Q4. The corporate WAN has been extended to two newly acquired sites and it includes gatekeeper support. Each site has a Cisco CallManager and an H.323 gateway that allows connection to the PSTN. Which connection method is best for these two new customers? 

A. H.225 trunk (gatekeeper-controlled) 

B. intercluster trunk (non-gatekeeper controlled) 

C. SIP trunk 

D. intercluster trunk (gatekeeper-controlled) 

View Answer

Q5. In a Cisco Unified Communications Manager centralized call processing model, what is the best CAC method recommended for this type of deployment? 

A. QoS-based 

B. location-based 

C. RSVP-based 

D. region-based 

E. gateway-based 

F. gatekeeper-based 

View Answer

Q6. How do RSVP-enabled locations differ from Cisco Unified Communications Manager locations? 

A. RSVP is configured in the ISR independent of Cisco Unified Communications Manager. 

B. RSVP enables AAR within Cisco Unified Communications Manager. 

C. RSVP is topology aware. 

D. RSVP is configured in Cisco Unified Communications Manager independent of the ISR. 

View Answer

Q7. Which three configuration settings are included in a default region configuration? (Choose three.) 

A. Audio Codec 

B. Video Call Bandwidth 

C. Link Loss Type 

D. Location Description 

E. Immersive Bandwidth 

F. Real Time Protocol 

View Answer

Q8. Refer to the exhibit. 

The HQ site uses area code 650. The BR1 site uses area code 408. The long distance national code for PSTN dialing is 1. To make a long distance national call, an HQ or BR1 user dials access code 9, followed by 1, and then the 10-digit number. Both sites use MGCP gateways. AAR must use globalized call routing using a single route pattern. Assume that all outgoing PSTN numbers are localized at the egress gateway as shown in the exhibit. 

What should the AAR group prefix be? 

A. 9 

B. 91 

C. none 

D. + 

E. +1 

View Answer

Q9. Which three options describe the main functions of SAF Clients? (Choose three.) 

A. registering the router as a client with the SAF network B. providing publishing services to the SAF network 

C. subscribing to SAF network services 

D. registering Cisco Unified Communications Manager subscribers with the publisher 

E. starting Cisco Unified Communications Manager services throughout the cluster 

F. integrating with Cisco IM and Presence for additional services 

View Answer

Q10. When an external call is placed from Ajax, they would like the ANI that is sent to the PSTN to be the main number, not the extension. For domestic calls, they would like 10 digits sent; for international calls, they would like to send the country code 1 and the 10 digits. How can this be accomplished? 

A. Add a translation pattern to the dial peers in the gateway that adds the appropriate digits to the outgoing ANI. 

B. In the external call route patterns, set the external phone number mask to the main number. Use 10 digits in the domestic route pattern and 1 followed by the main number digits in the international route patterns. 

C. Use a calling party transform mask for each route group in the corresponding route list configuration. Set the explicit 10-digit main number for domestic calls and 1 followed by the main number for the international route patterns. 

D. In the directory number configurations, set the prefix digits field to the country code and the 10 digits of the main number. This will be truncated to the 10-digit number for domestic calls and sent out in its entirety for international calls. 

View Answer