we provide Precise Cisco cisco 300 075 braindumps which are the best for clearing 300 075 pdf test, and to get certified by Cisco CIPTV2 Implementing Cisco IP Telephony and Video, Part 2. The 300 075 vce Questions & Answers covers all the knowledge points of the real 300 075 dump exam. Crack your Cisco cisco 300 075 Exam with latest dumps, guaranteed!
2026 New 300-075 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/300-075/
P.S. Precise 300-075 training tools are available on Google Drive, GET MORE: https://drive.google.com/open?id=1OTter-OjT8vzYmol0xCEAcv3FNmkyaGf
New Cisco 300-075 Exam Dumps Collection (Question 8 - Question 17)
New Questions 8
Which action configures AAR to route the calls that have been rejected by the gatekeeper CAC through the PSTN?
A. Configure Cisco IP Phones for AAR.
B. Configure AAR to work with SRST.
C. Configure AAR to work with CTI route points.
D. This configuration is not possible using AAR.
Answer: D
New Questions 9
Which two options for a Device Mobility-enabled IP phone are true? (Choose two.)
A. The phone configuration is not modified.
B. The roaming-sensitive parameters of the current (that is, the roaming) device pool are applied.
C. The user-specific settings determine which location-specific settings are downloaded from the Cisco Unified Communications Manager device pool.
D. If the DMGs are the same, the Device Mobility-related settings are also applied.
Answer: B,D
New Questions 10
Which two statements about international multisite dial plans are true? (Choose two.)
A. TEHO is legal in all countries.
B. TEHO is legal in most countries, but illegal in others.
C. TEHO reduces WAN utilization.
D. TEHO utilizes WAN links.
Answer: B,D
New Questions 11
Refer to the exhibit.
All HQ phones are configured to use HQ_MRGL and all BR phones are configured to use BR_MRGL. For the HQ phones always to use the hardware conference bridge as a first choice, which configuration should be implemented?
A. Ensure that both the hardware and software conference bridges are listed in the HQ_MRG. Ensure that the instance ID for the hardware conference bridge is 0.
B. Ensure that both the hardware and software conference bridges are listed in the HQ_MRG. The hardware conference bridge must be configured first.
C. Assign the hardware conference bridge to HQ_MRG. Configure a second HQ_MRG_2 and assign the software conference bridge to it. Add both the HQ_MRG and HQ_MRG_2 to the HQ_MRGL and list the HQ_MRG first.
D. Assign the hardware conference bridge to HQ_MRG. Configure a second HQ_MRG_2 and assign the software conference bridge to it. Configure an additional HQ_MRGL_2. Add the HQ_MRG to HQ_MRGL. Add HQ_MRG_2 to HQ_MRGL_2. The HQ_MRGL should be assigned to the HQ phones. The HQ_MRGL_2 should be assigned to the HQ device pool.
Answer: C
New Questions 12
Which statement is correct about AAR?
A. The end users sees, "Network Congestion Rerouting?" but AAR is otherwise transparent to the end user and works without user intervention.
B. AAR will display "not enough bandwidth" on the IP phone while it reroutes the call.
C. AAR allows calls to be rerouted because of insufficient Cisco Unified Border Element controlled bandwidth to an ITSP.
D. AAR allows calls to be rerouted due to insufficient gatekeeper controlled IP WAN bandwidth.
Answer: A
Explanation: Incorrect: BCD
Automated alternate routing (AAR) provides a mechanism to reroute calls through the PSTN or other network by using an alternate number when Cisco Unified Communications Manager blocks a call due to insufficient location bandwidth. With automated alternate routing, the caller does not need to hang up and redial the called party.
Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucmbe/admin/8_6_1/ccmcfg/b03aar.ht ml
New Questions 13
Refer to the exhibit.
The Cisco Unified Communications Manager at HQ has been configured for end-to-end RSVP. The Cisco Unified Communications Manager at BR has been configured for local RSVP.
RSVP between the locations assigned to the IP phones and SIP trunks at each site are configured with mandatory RSVP. When a call is placed from the IP phone at the BR site to the IP phone at the HQ site, which statement is true?
A. The Cisco Unified Communications Manager at BR will fall back to local RSVP and place the call. No RSVP end-to-end will occur.
B. RSVP end-to-end will occur.
C. The Cisco Unified Communications Manager at BR will use local RSVP. The HQ Cisco Unified Communications Manager will use end-to-end RSVP.
D. The call will fail.
E. The call will proceed as a normal call with no RSVP reservation.
Answer: A
New Questions 14
Which two actions are performed by the Call Control Discovery service after the local Cisco Unified Communications Manager loses its TCP connection with the primary and secondary Service Advertisement Framework? (Choose two.)
A. Calls are routed to the PSTN gateway after the Call Control Discovery Learned Pattern IP Reachable Duration parameter expires.
B. All learned patterns are purged from the local cache after the Call Control Discovery PSTN Failover Duration parameter expires.
C. The Service Advertisement Framework forwarder contacts all the remaining Service Advertisement Framework forwarders in the cluster.
D. All the remaining Service Advertisement Framework forwarders are notified for their learned patterns.
E. The Cisco Unified Communications Manager establishes a connection with the primary and secondary Service Advertisement Framework after the Learned Pattern IP Reachable Duration parameter expires.
F. Call Control Discovery immediately redirects all the calls to the PSTN gateway based on the learned patterns.
Answer: A,B
New Questions 15
Which action configures transcoding resources in Cisco Unified Communications Manager to function with branch office Cisco IP Phones?
A. Configure the branch office IP phones with CSS and partitions.
B. Configure the branch office IP phones with MRGs and MRGLs.
C. Configure the branch office IP phones with regions.
D. Configure the branch office IP phones with locations.
Answer: B
New Questions 16
When an external call is placed from Ajax, they would like the ANI that is sent to the PSTN to be the main number, not the extension. For domestic calls, they would like 10 digits sent; for international calls, they would like to send the country code 1 and the 10 digits. How can this be accomplished?
A. Add a translation pattern to the dial peers in the gateway that adds the appropriate digits to the outgoing ANI.
B. In the external call route patterns, set the external phone number mask to the main number. Use 10 digits in the domestic route pattern and 1 followed by the main number digits in the international route patterns.
C. Use a calling party transform mask for each route group in the corresponding route list configuration. Set the explicit 10-digit main number for domestic calls and 1 followed by the main number for the international route patterns.
D. In the directory number configurations, set the prefix digits field to the country code and the 10 digits of the main number. This will be truncated to the 10-digit number for domestic calls and sent out in its entirety for international calls.
Answer: C
Explanation: Incorrect: ABD
calling party transformation mask value is Valid entries for the NANP include the digits 0 through 9; the wildcard characters X, asterisk (*), and octothorpe (#); and the international escape character +.
Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucmbe/admin/8_6_1/ccmcfg/b03trpat.ht ml
New Questions 17
What are two important considerations when implementing TEHO to reduce long-distance cost? (Choose two.)
A. on-net calling patterns
B. E911 calling
C. number of route patterns
D. caller ID
Answer: B,D
P.S. Easily pass 300-075 Exam with Surepassexam Precise Dumps & pdf vce, Try Free: https://www.surepassexam.com/300-075-exam-dumps.html (420 New Questions)