Want to know Examcollection 300 075 dump Exam practice test features? Want to lear more about Cisco Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) certification experience? Study Approved Cisco 300 075 vce answers to Up to the immediate present 300 075 dump questions at Examcollection. Gat a success with an absolute guarantee to pass Cisco 300 075 ciptv2 (Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2)) test on your first attempt.
2026 New 300-075 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/300-075/
Q1. Which Cisco IOS command is used for internal SAF Clients to check SAF learned routes?
A. show eigrp address-family ipv4 saf
B. show voice saf routes
C. show voice saf detail
D. show eigrp service-family ipv4 saf
E. show voice saf dndb all
Answer: E
Explanation:
Incorrect Answer: A, B, C, D Router# show voice saf dnDb all Total no. of patterns in db/max allowed : 1/6000 Patterns classified under dialplans (private/global) : 0/1 Informational/Error stats -Patterns w/ invalid expr detected while add : 0 Patterns duplicated under the same instance : 0 Patterns rejected overall due to max capacity : 0 Attempts to delete a pattern which is invalid : 0
Last successful DB update @ 2009:12:14 15:42:45:967 Link:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/feature/guide/SAF_FeatureModule.html#wp1202115
Q2. Refer to the exhibit.
HQ_MRGL is assigned to the HQ IP phones. BR_MRGL is assigned to the BR IP phones. The remote site BR IP phones support only the G.711 codec. Where should the transcoder reside?
A. The transcoder should reside at the HQ site and assigned to HQ_MRG.
B. The transcoder should reside at the BR site and assigned to BR_MRG.
C. The transcoder should be assigned to its own MRG, which should then be assigned to the default device pool.
D. A transcoder is not needed. The HQ phones will automatically change over to the G.711 codec.
Answer: B
Q3. Which remote-site redundancy technology fails over to POTS dial peers from the Cisco Unified Communications Manager dial plan during a WAN failure?
A. MGCP fallback
B. H.323 fallback
C. SCCP fallback
D. SIP fallback
Answer: A
Q4. The corporate WAN has been extended to two newly acquired sites and it includes gatekeeper support. Each site has a Cisco CallManager and an H.323 gateway that allows connection to the PSTN. Which connection method is best for these two new customers?
A. H.225 trunk (gatekeeper-controlled)
B. intercluster trunk (non-gatekeeper controlled)
C. SIP trunk
D. intercluster trunk (gatekeeper-controlled)
Answer: D
Q5. The relationship between a Region and a Location is that the Region codec parameter is combined with Location bandwidth when communicating with other Regions.
A. FALSE
B. TRUE
Answer: A
Explanation:
Locations work in conjunction with regions to define the characteristics of a network link. Regions define the type of compression (G.711, G.722, G.723, G.729, GSM, or wideband) that is used on the link, and locations define the amount of available bandwidth for the link Link:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a02cac.html #wp1033331
Q6. Refer to the exhibit.
IT shows an H.323 gateway configuration in a Cisco Unified Communications Manager environment. An inbound PSTN call to this H.323 gateway fails to connect to IP phone extension 2001. The PSTN user hears a reorder tone. Debug isdn q931 on the H.323 gateway shows the correct called-party number as 5015552001. Which two configuration changes can correct this issue? (Choose two.)
A. Add port 1/0:23 to dial-peer voice 123 pots.
B. Ensure that the Significant Digits for inbound calls on the H.323 gateway configuration is 4.
C. Add a voice translation profile to truncate the number from 10 digits to 4 digits. Apply the voice translation profile to the Voice-port. The configuration field "Significant Digits for inbound calls" is left at default (All).
D. Add the command h323-gateway voip id on interface vlan120.
E. Change the destination-pattern on the dial-peer voice 23000 VoIP to 501501? and change the Significant Digits for inbound calls to 4.
Answer: B,E
Explanation:
Incorrect Answer: A, C, D Choose the number of significant digits to collect, from 0 to 32. Cisco Unified Communications Manager counts significant digits from the right (last digit) of the number that is called. Link: http://cisco.biz/en/US/docs/voice_ip_comm/cucmbe/admin/8_6_1/ccmcfg/b06trunk.html
Q7. Which statement about technology implementation strategy is true?
A. Cisco Unified Communications Manager Express can be configured to function with no Cisco Unified Communications Manager cluster in the enterprise.
B. Cisco Unified Communications Manager Express in SRST mode can be configured to function with no Cisco Unified Communications Manager cluster in the enterprise.
C. SRST can be configured to function with no Cisco Unified Communications Manager cluster in the enterprise.
D. SRST and MGCP fallback can be configured to function with no Cisco Unified Communications Manager cluster in the enterprise.
Answer: A
Q8. Refer to the exhibit.
What should the destination IP address be configured as on the HQ and BR1 SIP trunks?
A. The HQ SIP trunk destination IP address should be 10.1.6.10. The BR1 SIP trunk destination IP address should be 10.1.5.10.
B. The destination IP address is not configurable. Each cluster will learn about the remote trunk IP address through SAF learned routes.
C. The destination IP address will be learned automatically and configured on the SIP trunks after the Cisco Unified Communications Managers discover themselves.
D. The HQ SIP trunk destination IP address should be the HQ SAF Forwarder IP address. The BR1 SIP trunk destination IP address should be the BR1 SAF Forwarder IP address.
Answer: B
Explanation:
Incorrect Answer: A, C, D
The gatekeeper changes the IP address of this remote device dynamically to reflect the IP address of the remote device.
Link:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a08trnk.html
Q9. Refer to the exhibit.
Which CSS is used at the HQ Cisco Unified Communications Manager to reroute calls via the PSTN when the SAF network is unavailable?
A. the phone device CSS
B. the phone line CSS
C. the phone line/device combined CSS
D. the SAF CSS configured on the CCD requesting service
E. the phone AAR CSS configured at the phone device
F. No special CSS is required. If SAF patterns are accessible, the PSTN reroute is automatic.
Answer: E
Q10. What is the purpose of a SAF Client?
A. To decode address information and route calls to and from the end points
B. To pass IP information from the CUCM to the endpoint
C. To learn about and advertise or subscribe information about SAF network services
D. To reside in the Cisco IOS software, and to communicate with the SAF forwarder
Answer: C