Approved of 300 075 vce simulations materials and samples for Cisco certification for IT learners, Real Success Guaranteed with Updated cisco 300 075 pdf dumps vce Materials. 100% PASS Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) exam Today!
2026 New 300-075 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/300-075/
Q1. Which Cisco IOS command is used for internal SAF Clients to check SAF learned routes?
A. show eigrp address-family ipv4 saf
B. show voice saf routes
C. show voice saf detail
D. show eigrp service-family ipv4 saf
E. show voice saf dndb all
Answer: E
Explanation:
Incorrect Answer: A, B, C, D Router# show voice saf dnDb all Total no. of patterns in db/max allowed : 1/6000 Patterns classified under dialplans (private/global) : 0/1 Informational/Error stats -Patterns w/ invalid expr detected while add : 0 Patterns duplicated under the same instance : 0 Patterns rejected overall due to max capacity : 0 Attempts to delete a pattern which is invalid : 0
Last successful DB update @ 2009:12:14 15:42:45:967 Link:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/feature/guide/SAF_FeatureModule.html#wp1202115
Q2. The network administrator at Enterprise X is creating the guidelines for a new IPT deployment consisting of a large number of remote offices. Every user within Enterprise X is assigned a directory number of 5 digits. Which option might cause an issue in a multisite deployment?
A. Overlapping DID ranges are allocated to each site.
B. The maximum number of IP phones are in use at each remote site.
C. MoH cannot be provided for the remote sites.
D. All media streams are necessarily routed through the central office for calls to establish correctly.
Answer: A
Q3. Scenario
There are two call control systems in this item. The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 9971 Video IP Phone. The Cisco VCS and TMS control the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows.
Use the exhibits to answer the following questions.
DP
Locations
CSS
SRST
SRST-BR2 Config
BR2 Config
SRSTPSTNCall
After adding SRST functionality the SRST does not work. After reviewing the exhibits, which of the following reasons could be causing this failure?
A. Device Pool cannot be default.
B. The Cisco UCM is pointing to the wrong IPv4 address of the BR router.
C. The router does not support SRST.
D. The SRST enabled router is not configured correctly.
Answer: A
Q4. What is the purpose of configuring a hardware-based MTP when deploying Cisco Unified Communications Manager?
A. to allow for supplementary services such as hold, transfer, and conferencing
B. when you need support for up to 24 MTP sessions on the same server and 48 on a separate server
C. when you need the ability to grow support by using DSPs
D. when you want to only use Cisco Unified Communications Manager resources
Answer: C
Q5. Which two features require or may require configuring a SIP trunk? (Choose two.)
A. SIP gateway
B. Call Control Discovery between a Cisco Unified Communications Manager and Cisco Unified Communications Manager Express
C. Cisco Device Mobility
D. Cisco Unified Mobility
E. registering a SIP phone
Answer: A,B
Explanation:
Incorrect Answer: C, D, E All protocols require that either a signaling interface (trunk) or a gateway be created to accept and originate calls. Device mobility allows Cisco Unified Communications Manager to determine whether the phone is at its home location or at a roaming location. Cisco Unified Mobility gives users the ability to redirect incoming IP calls from Cisco Unified Communications Manager to different designated phones, such as cellular phones. Link:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a08sip.html# wpxref77849
Q6. Refer to the following exhibit.
Which Cisco IOS SAF Forwarder configuration is correct?
A. Exhibit A
B. Exhibit B
C. Exhibit C
D. Exhibit D
Answer: A
Explanation:
Incorrect Answer: B, C, D Summary steps to configure IOS SAF forwarder is given below
1. enable
2. configure terminal
3. router eigrp virtual-instance-name
4. service-family {ipv4 | ipv6} [vrf vrf-name] autonomous-system autonomous-system-number
5. topology base
6. external-client client_label
7. exit-sf-topology
8. exit-service-family
9. exit
10. service-family external-client listen {ipv4 | ipv6} tcp_port_number
11. external-client client-label
12. username user-name
13. password password-name
14.
Q7. In which two locations can you verify that a phone has a standby Cisco Unified Communications Manager? (Choose two.)
A. RTMT
B. phone menu
C. Cisco Unified Serviceability
D. phone webpage
Answer: B,D
Q8. What is the difference between an MGCP gateway and a SIP gateway?
A. An MGCP gateway that dial peers be configured before PSTN calls can be placed and received. The SIP gateway requires no dial peers.
B. An MGCP gateway can be added in Cisco Unified Communications Manager under the Gateway Type field using the gateway model. The SIP gateway can connect to Cisco Unified Communications Manager only through a SIP trunk.
C. A SIP gateway requires a call agent for PSTN calls to be placed and received. An MGCP gateway does not require a call agent for PSTN calls to be placed and received.
D. An MGCP gateway can register with Cisco Unified Communications Manager. A SIP gateway will show status of "Unknown".
E. The SIP gateway must be configured in Cisco Unified Communications Manager using a valid IP address on the gateway. The MGCP gateway must be configured in Cisco Unified
Communications Manager using the domain name.
Answer: B
Q9. How does the system intelligently shift call processing upon restoration of WAN connectivity?
A. automatically back to the primary Cisco Unified Communications Manager cluster
B. manually back to the primary Cisco Unified Communications Manager cluster
C. automatically back to the secondary Cisco Unified Communications Manager cluster
D. manually back to the secondary Cisco Unified Communications Manager cluster
Answer: A
Q10. Scenario
There are two call control systems in this item. The Cisco UCM is controlling the Cisco Jabber for Windows Client, and the 7965 and 9971 Video IP Phone. The Cisco VCS is controlling the SX20, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows.
Use the exhibits to answer the following questions.
DP
Locations
CSS
Movi Failure
Movi Settings
CIPTV Topo
Subzone
Links
Pipe
Both of the Cisco TelePresence Video for Windows clients are able to log into the server but can’t make any calls. After reviewing the exhibits, which of the following reasons could be causing this failure?
A. Wrong username and/or password.
B. Wrong SIP domain name.
C. The TMSPE is not working.
D. The bandwidth is incorrectly configured.
Answer: D