how many questions of 400-151 examcollection?

Q1. Which descripting of how to enable the Flex Flash Controller auto-sync function on the B200M4 blade is true?

A. Configure a focal disk policy for FlexFlash.

B. Enable auto-sync in the servers > inventory > storage subtab.

C. Configure a storage policy for FX3S.

D. Configure a storage connection policy to use auto-sync.

View Answer

Q2. In Multiple vendor environment, which approach is recommended in Cisco NX-OS to generate the BGP route distinguisher and route target?

A. Manually configure route distinguisher and auto generate route-target values.

B. Auto generate route distinguisher and route-target values and make manual adjustments.

C. Auto generate route distinguisher and route-target values.

D. Manually configure route distinguisher and route-target values

View Answer

Q3. Refer to the exhibit.

A virtual machine in the EPG "Clients" is unable to communicate via ICMP with a virtual machine in the EPG "Server" Which option is the most likely cause of this issue?

A. The EPG "Server" is providing the relevant contract but the EPG "Clients" is not consuming the contract.

B. There is no issue because the configured rules permit ICMP traffic.

C. Not enough detail is provided in the output to determine the exact cause.

D. No is contract configured between the two EPGs.

View Answer

Q4. SNMPv3 authorizes management operations only by configured users and encrypts SNMP

messages. Which authentication protocols does Cisco NX-OS Software use for SNMPv3? (Choose two.)

A. NMAC-SHA-96 authentication protocol

B. HMAC-MD5-96 authentication protocol

C. Community String Match protocol

D. NMAC-MD5-96 authentication protocol

E. HMAC-SHA-96 authentication protocol

View Answer

Q5. DRAG DROP

Drag and drop feature on the left onto the appropriate business benefits on the right.

View Answer

Q6. Based on the configuration example, which VLAN is used for Discovery? 

vlan 1105

fcoe vsan 105 switchport mode trunk

switchport trunnk native vlan ... switchport trunk allowed 1,105,200,1105

A. VLAN 1105

B. VLAN 1

C. VLAN 200

D. VLAN 105

View Answer

Q7. Which three limitations or requirements do MP-BGP-based EVPN addresses have compared to the initial IETF VXLAN standard (RFC 7348)? (Choose three).

A. Network flooding through protocol-based host MAC/IP route distribution and ARP suppression on the local VTEPs

B. active-passive multihoming at Layer2

C. requirement to disable multicast for underlay forwarding

D. scalability limitations due to data-driven flood-and-learn behavior

E. control-plane learning of end-host Layer 2 and Layer 3 reachability information, which provides integrated bridging and routing in VXLAN overla networks.

View Answer

Q8. Refer to the Exhibit.

Which two statements are true? (Choose two.)

A. FC Zoning is going to be enabled automatically after the template is created.

B. With the current fabric ID configuration on the vHBA template, cannot see the new VLAN

C. All the required values have been configured in the vHBA template; after the VLAN is created, you can press OK start using the template.

D. To modify the vHBA from the service profile in the future; you first must unbind the template from the vHBA fc0 template.

E. VSAN and VLAN ID are assigned according to best practices.

View Answer

Q9. Which programming language is used to write custom workflow code in Cisco UCS Director?

A. Python

B. Bash script

C. Java script

D. Java

View Answer

Q10. Which Cisco UCS Director feature provides API information and API code generation capacities that make it easy to see and work with all the available APIs, including the REST APIs and the Java APIs?

A. report metadata

B. REST API Browser

C. automation feature set

D. orchestration feature set

View Answer