Master the 300 075 pdf Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) content and be ready for exam day success quickly with this Actualtests 300 075 dump exam cost. We guarantee it!We make it a reality and give you real 300 075 ciptv2 questions in our Cisco cisco 300 075 braindumps.Latest 100% VALID Cisco 300 075 vce Exam Questions Dumps at below page. You can use our Cisco cisco 300 075 braindumps and pass your exam.


2026 New 300-075 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/300-075/

Q1. Which two statements about the functionality of a gatekeeper are true? (Choose two.) 

A. Cisco Unified Communications Manager has gatekeeper functionality built in. 

B. Cisco Unified Communications Manager registers with a gatekeeper via SIP. 

C. Cisco Unified Communications Manager registers with a gatekeeper via H.323. 

D. A gatekeeper can enable CAC and AAR. 

E. A gatekeeper can enable CAC, but not AAR. 

Answer: C,E 

Q2. Refer to the exhibit. 

What must be configured on the HQ Cisco Unified Communications Manager to allow HQ users to dial the SAF learned directory number pattern 3XXX? 

A. Route pattern 3XXX should be configured and made available to HQ users through the phone CSS. 

B. Route pattern 3XXX should be configured and made available to HQ phone users through the phone AAR CSS. 

C. The SAF partition assigned to the SAF learned patterns must be available to the HQ phone users through the phone CSS. 

D. The SAF partition assigned to the SAF learned patterns must be available to the HQ phone users through the phone AAR CSS. 

E. The SAF directory number pattern 3XXX will be made available to all users automatically as soon as the SAF partition is selected. 

Answer: C 

Explanation: 

Incorrect Answer: A, B, D By adopting the SAF network service, the call control discovery feature allows Cisco Unified Communications Manager to advertise itself along with other key attributes. Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmfeat/fscallcontrol discovery.html 

Q3. Which three items must you configure to enable SAF Call Control Discovery? (Choose three.) 

A. the SIP or H.323 trunk 

B. hosted DN groups 

C. hosted DN patterns 

D. route patterns 

E. a calling search space 

F. translation patterns 

Answer: A,B,C 

Q4. What is the fastest way for an engineer to test the implementation of SRST in a production environment? 

A. Shut down the Cisco Unified Communications Manager Servers. 

B. Shut down the switch ports connected to the Cisco Unified Communications Manager Servers. 

C. Add a null route to the publisher Cisco Unified Communications Manager at the remote router. Remove the null route when the operation is verified. 

D. Unplug the IP phones from their switch ports. 

E. Verification is not needed. 

Answer: C 

Q5. Refer to the exhibit. 

IT shows an H.323 gateway configuration in a Cisco Unified Communications Manager environment. An inbound PSTN call to this H.323 gateway fails to connect to IP phone extension 2001. The PSTN user hears a reorder tone. Debug isdn q931 on the H.323 gateway shows the correct called-party number as 5015552001. Which two configuration changes can correct this issue? (Choose two.) 

A. Add port 1/0:23 to dial-peer voice 123 pots. 

B. Ensure that the Significant Digits for inbound calls on the H.323 gateway configuration is 4. 

C. Add a voice translation profile to truncate the number from 10 digits to 4 digits. Apply the voice translation profile to the Voice-port. The configuration field "Significant Digits for inbound calls" is left at default (All). 

D. Add the command h323-gateway voip id on interface vlan120. 

E. Change the destination-pattern on the dial-peer voice 23000 VoIP to 501501? and change the Significant Digits for inbound calls to 4. 

Answer: B,E 

Explanation: 

Incorrect Answer: A, C, D Choose the number of significant digits to collect, from 0 to 32. Cisco Unified Communications Manager counts significant digits from the right (last digit) of the number that is called. Link: http://cisco.biz/en/US/docs/voice_ip_comm/cucmbe/admin/8_6_1/ccmcfg/b06trunk.html 

Q6. If the device pool in the phone record does not match the device pools in the matching subnet, what will the system consider the phone to be? 

A. roaming 

B. unregistered 

C. unknown 

D. new device 

Answer: A 

Q7. Scenario 

There are two call control systems in this item. The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 9971 Video IP Phone. The Cisco VCS is controlling the SX20, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows. 

Use the exhibits to answer the following questions. 

SX20 System Information 

DX650 Configuration 

MRGL 

DP 

Locations 

AARG 

CSS 

Movi Failure 

Movi Settings 

A new DX650 IP phone with MAC address D0C7.8914.132D, IP address is 172.18.32.119 has been added to the Cisco Unified Communications Manager, but is not registering properly. 

What is causing this failure? 

A. Device Pool cannot be default. 

B. The DX650 is the incorrect calling search space. 

C. The DX650 Phones does not support SIP. 

D. The location Hub_None has not been activated. 

E. The DX650’s MAC address is incorrect in the Cisco UCM. 

Answer: E 

Explanation: 

From the screen capture below we can see that the DX650 phone’s MAC address was incorrectly entered as D0C78914131D, not D0C78914132D. 

Q8. When using Cisco Unified Communications Manager Express in SRST mode, how many multicast music on hold streams can be utilized by the system at any given time? 

A. 3 

B. 6 

C. 2 

D. 4 

E. 1 

F. 5 

Answer: B 

Q9. Company A has deployed a VCS Control and is attempting to register a third-party endpoint. The engineer has confirmed that no traffic is being blocked for the endpoint and it is receiving a valid IP address. Which option could be the cause of this registration failure? 

A. Third-party endpoints are not compatible with VCS Control, only with VCS Expressway. 

B. Cisco Unified Communications Manager is required in addition to the VCS Control. 

C. An incorrect SIP domain is configured on the VCS Control for the endpoint. 

D. The VCS Control must be deployed together with VCS Expressway before endpoints can register to either one. 

Answer: C 

Q10. Which command can be used to manually send the MGCP gateway to register with the secondary Cisco Unified Communications Manager server? 

A. ccm-manager switchover-to-backup 

B. mgcp use backup 

C. ccm-manager register backup 

D. not supported 

Answer: A