We provide real 9tut ccnp switch 300 115 exam questions and answers braindumps in two formats. Download PDF & Practice Tests. Pass Cisco ccnp switch 300 115 dumps pdf Exam quickly & easily. The 9tut ccnp switch 300 115 PDF type is available for reading and printing. You can print more and practice many times. With the help of our Cisco ccnp 300 115 pdf dumps pdf and vce product and material, you can easily pass the 9tut ccnp switch 300 115 exam.


2026 New 300-115 Exam Dumps with PDF and VCE Free: https://www.surepassexam.com/300-115-exam-dumps.html

Q1. Which statement about LLDP-MED is true?

A. LLDP-MED is an extension to LLDP that operates between endpoint devices and network devices.

B. LLDP-MED is an extension to LLDP that operates only between network devices.

C. LLDP-MED is an extension to LLDP that operates only between endpoint devices.

D. LLDP-MED is an extension to LLDP that operates between routers that run BGP.

Answer: A

Q2. On which interface can port security be configured?

A. static trunk ports

B. destination port for SPAN

C. EtherChannel port group

D. dynamic access point

Answer: A

Q3. Which command creates a login authentication method named "login" that will primarily use RADIUS and fail over to the local user database?

A. (config)# aaa authentication login default radius local

B. (config)# aaa authentication login login radius local

C. (config)# aaa authentication login default local radius

D. (config)# aaa authentication login radius local

Answer: B

Q4. After the implementation of several different types of switches from different vendors, a network engineer notices that directly connected devices that use Cisco Discovery Protocol are not visible. Which vendor-neutral protocol could be used to resolve this issue?

A. Local Area Mobility

B. Link Layer Discovery Protocol

C. NetFlow

D. Directed Response Protocol

Answer: B

Q5. A network engineer deployed a switch that operates the LAN base feature set and decides to use the SDM VLAN template. The SDM template is causing the CPU of the switch to

spike during peak working hours. What is the root cause of this issue?

A. The VLAN receives additional frames from neighboring switches.

B. The SDM VLAN template causes the MAC address-table to overflow.

C. The VLAN template disables routing in hardware.

D. The switch needs to be rebooted before the SDM template takes effect.

Answer: C

Q6. A network engineer must set the load balance method on an existing port channel. Which action must be done to apply a new load balancing method?

A. Configure the new load balancing method using port-channel load-balance.

B. Adjust the switch SDM back to "default".

C. Ensure that IP CEF is enabled globally to support all load balancing methods.

D. Upgrade the PFC to support the latest load balancing methods.

Answer: A

Q7. After UDLD is implemented, a Network Administrator noticed that one port stops receiving UDLD packets. This port continues to reestablish until after eight failed retries. The port then transitions into the errdisable state. Which option describes what causes the port to go into the errdisable state?

A. Normal UDLD operations that prevent traffic loops.

B. UDLD port is configured in aggressive mode.

C. UDLD is enabled globally.

D. UDLD timers are inconsistent.

Answer: B

Q8. Which statement about the UDLD protocol is true?

A. UDLD is a Cisco-proprietary Layer 2 protocol that enables devices to monitor the physical status of links and detect unidirectional failures.

B. UDLD is a Cisco-proprietary Layer 2 protocol that enables devices to advertise their identity, capabilities, and neighbors on a local area network.

C. UDLD is a standardized Layer 2 protocol that enables devices to monitor the physical status of links and detect unidirectional failures.

D. UDLD is a standardized Layer 2 protocol that enables devices to advertise their identity, capabilities, and neighbors on a local area network.

Answer: A

Q9. A server with a statically assigned IP address is attached to a switch that is provisioned for DHCP snooping. For more protection against malicious attacks, the network team is considering enabling dynamic ARP inspection alongside DHCP snooping. Which solution ensures that the server maintains network reachability in the future?

A. Disable DHCP snooping information option.

B. Configure a static DHCP snooping binding entry on the switch.

C. Trust the interface that is connected to the server with the ip dhcp snooping trust command.

D. Verify the source MAC address of all untrusted interfaces with ip dhcp snooping verify mac-address command.

Answer: B

Q10. Which action allows a network engineer to limit a default VLAN from being propagated across all trunks?

A. Upgrade to VTP version 3 for advanced feature set support.

B. Enable VTP pruning on the VTP server.

C. Manually prune default VLAN with switchport trunk allowed vlans remove.

D. Use trunk pruning vlan 1.

Answer: C