We provide real ccnp security senss 300 206 official cert guide exam questions and answers braindumps in two formats. Download PDF & Practice Tests. Pass Cisco 300 206 senss Exam quickly & easily. The ccnp security senss 300 206 official cert guide PDF type is available for reading and printing. You can print more and practice many times. With the help of our Cisco 300 206 senss pdf dumps pdf and vce product and material, you can easily pass the ccnp security senss 300 206 official cert guide pdf exam.


2026 New 300-206 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/300-206/

Q1. Which feature is a limitation of a Cisco ASA 5555-X running 8.4.5 version with multiple contexts? 

A. Deep packet inspection 

B. Packet tracer 

C. IPsec 

D. Manual/auto NAT 

E. Multipolicy packet capture 

Answer: C 

Q2. Which Cisco Security Manager form factor is recommended for deployments with fewer than 25 devices? 

A. only Cisco Security Manager Standard 

B. only Cisco Security Manager Professional 

C. only Cisco Security Manager UCS Server Bundle 

D. both Cisco Security Manager Standard and Cisco Security Manager Professional 

Answer: A 

Q3. A network engineer is asked to configure NetFlow to sample one of every 100 packets on a router's fa0/0 interface. Which configuration enables sampling, assuming that NetFlow is already configured and running on the router's fa0/0 interface? 

A. flow-sampler-map flow1 

mode random one-out-of 100 

interface fas0/0 

flow-sampler flow1 

B. flow monitor flow1 

mode random one-out-of 100 

interface fas0/0 

ip flow monitor flow1 

C. flow-sampler-map flow1 

one-out-of 100 

interface fas0/0 

flow-sampler flow1 

D. ip flow-export source fas0/0 one-out-of 100 

Answer: A 

Q4. Which two statements about zone-based firewalls are true? (Choose two.) 

A. More than one interface can be assigned to the same zone. 

B. Only one interface can be in a given zone. 

C. An interface can only be in one zone. 

D. An interface can be a member of multiple zones. 

E. Every device interface must be a member of a zone. 

Answer: A,C 

Q5. An administrator installed a Cisco ASA that runs version 9.1. You are asked to configure the firewall through Cisco ASDM. 

When you attempt to connect to a Cisco ASA with a default configuration, which username and password grants you full access? 

A. admin / admin 

B. asaAdmin / (no password) 

C. It is not possible to use Cisco ASDM until a username and password are created via the username usernamepassword password CLI command. 

D. enable_15 / (no password) 

E. cisco / cisco 

Answer: D 

Q6. When you install a Cisco ASA AIP-SSM, which statement about the main Cisco ASDM home page is true? 

A. It is replaced by the Cisco AIP-SSM home page. 

B. It must reconnect to the NAT policies database. 

C. The administrator can manually update the page. 

D. It displays a new Intrusion Prevention panel. 

Answer: D 

Q7. If you disable PortFast on switch ports that are connected to a Cisco ASA and globally turn on BPDU filtering, what is the effect on the switch ports? 

A. The switch ports are prevented from going into an err-disable state if a BPDU is received. 

B. The switch ports are prevented from going into an err-disable state if a BPDU is sent. 

C. The switch ports are prevented from going into an err-disable state if a BPDU is received and sent. 

D. The switch ports are prevented from forming a trunk. 

Answer: C 

Q8. CORRECT TEXT 

You are the network security engineer for the Secure-X network. The company has recently detected Increase of traffic to malware Infected destinations. The Chief Security Officer deduced that some PCs in the internal networks are infected with malware and communicate with malware infected destinations. 

The CSO has tasked you with enable Botnet traffic filter on the Cisco ASA to detect and deny further connection attempts from infected PCs to malware destinations. You are also required to test your configurations by initiating connections through the Cisco ASA and then display and observe the Real-Time Log Viewer in ASDM. To successfully complete this activity, you must perform the following tasks: 

* Download the dynamic database and enable use of it. 

. Enable the ASA to download of the dynamic database 

. Enable the ASA to download of the dynamic database. 

. Enable DNS snooping for existing DNS inspection service policy rules.. 

. Enable Botnet Traffic Filter classification on the outside interface for All Traffic. 

. Configure the Botnet Traffic Filter to drop blacklisted traffic on the outside interface. Use the default Threat Level settings 

NOTE: The database files are stored in running memory; they are not stored in flash memory. 

NOTE: DNS is enabled on the inside interface and set to the HQ-SRV (10.10.3.20). 

NOTE: Not all ASDM screens are active for this exercise. 

. Verify that the ASA indeed drops traffic to blacklisted destinations by doing the following: 

. From the Employee PC, navigate to http://www.google.com to make sure that access to the Internet is working. 

. From the Employee PC, navigate to http://bot-sparta.no-ip.org. This destination is classified as malware destination by the Cisco SIO database. 

. From the Employee PC, navigate to http://superzarabotok-gid.ru/. This destination is classified as malware destination by the Cisco SIO database. 

. From Admin PC, launch ASDM to display and observe the Real-Time Log Viewer. 

Answer: Use the following configuration to setup in explanation. 

Q9. Which option is a valid action for a port security violation? 

A. Reset 

B. Reject 

C. Restrict 

D. Disable 

Answer: C 

Q10. Which type of object group will allow configuration for both TCP 80 and TCP 443? 

A. service 

B. network 

C. time range 

D. user group 

Answer: A