Pass4sure 352-001 Questions are updated and all 352-001 answers are verified by experts. Once you have completely prepared with our 352-001 exam prep kits you will be ready for the real 352-001 exam without a problem. We have Replace Cisco 352-001 dumps study guide. PASSED 352-001 First attempt! Here What I Did.


2026 New 352-001 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/352-001/

Q1. You are designing a solution to eliminate the risk of high CPU utilization on a core network composed of CRS-1 devices. Which option would eliminate the risk of high CPU utilization across the network? 

A. Use Local Packet Transport Services (LPTS) to manage hardware SNMP flow rate. 

B. Use the in-band control plane policy feature to reduce the SNMP flow rate. 

C. Use the control plane policy feature and reduce SNMP flow rate. 

D. Use control-plane management-plane in-band and reduce the SNMP flow rate. 

E. Use the control-plane management-plane out-of-band feature to reduce the SNMP flow rate. 

Answer: A 

Q2. You are designing a large Frame Relay WAN for a customer. The routing protocol is OSPF. What is the effect on the routing table if the WAN interfaces are configured as point-to-multipoint? 

A. Only a route for the DR will be present in the routing table. 

B. Configuring point-to-multipoint has no effect on the routing table. The route that is configured with the area command will be seen in the routing table. 

C. Multipoint interfaces dynamically add the network of the connected interface. 

D. Multipoint interfaces dynamically add a /32 route for each neighbor in the WAN. 

Answer: D 

Q3. You are designing a Group Encrypted Transport Virtual Private Network solution consisting of 30 group members. Which measure helps protect encrypted user traffic from replay attacks? 

A. counter-based anti-replay 

B. time-based anti-replay 

C. nonce payload 

D. RSA-encrypted nonce 

E. digital certificates 

Answer: B 

Q4. You have been asked to design a high-density wireless network for a university campus. Which three principles would you apply in order to maximize the wireless network capacity? (Choose three.) 

A. Increase the number of SSIDs to load-balance the client traffic. 

B. Choose a high minimum data rate to reduce the duty cycle. 

C. Make use of the 5-GHz band to reduce the spectrum utilization on 2.4 GHz when dual-band clients are used. 

D. Enable 802.11ag channel bonding on both 2.4 GHz and 5 GHz to increase the maximum aggregated cell throughput. 

E. Use directional antennas to achieve better sector separation channel reuse. 

F. Implement a four-channel design on 2.4 GHz to increase the number of available channels. 

Answer: BCE 

Q5. You are a network designer and are responsible for ensuring that the network you design is secure. How do you plan to prevent infected devices on your network from sourcing random DDoS attacks using forged source addresses? 

A. ACL-based forwarding 

B. ACL filtering by destination 

C. Unicast RPF loose mode 

D. Unicast RPF strict mode 

Answer: D 

Q6. What is a key role for the access layer in a hierarchical network design? 

A. The access layer provides a security, QoS, and policy trust boundary. 

B. The access layer provides an aggregation point for services and applications. 

C. The access layer serves as a distribution point for services and applications. 

D. The access layer can be used to aggregate remote users. 

Answer: A 

Q7. You are identifying performance management requirements for a VoIP migration. What three key performance indicators would you use to track media quality? (Choose three.) 

A. delay 

B. trunk group usage 

C. jitter 

D. packet loss 

E. call processing (call detail records) 

F. call processing (performance counters) 

G. echo 

H. crosstalk 

Answer: ACD 

Q8. A company is planning to deploy high-availability cluster support for their servers in a collapsed core data center design. Which issue should be a concern with this design? 

A. NIC teaming 

B. MAC address aging 

C. Layer 3 domain sizing 

D. Layer 2 domain sizing 

Answer: D 

Q9. Refer to the exhibit. 

How would you adjust the design to improve convergence on the network? 

A. Add an intra-POP link between routers 1A and 1B, and enable IP LFA FRR. 

B. Use an IP SLA between the end stations to detect path failures. 

C. Enable SSO-NSF on routers 1A and 1B. 

D. Use BGP to connect the sites over the WAN. 

Answer: A 

Q10. In which two ways is a network design improved by the inclusion of IP Event Dampening? (Choose two.) 

A. reduces processing load 

B. provides sub-second convergence 

C. improves network stability 

D. prevents routing loops 

E. quickly detects network failures 

Answer: AC