Proper study guides for Most recent Cisco Implementing Cisco Secure Mobility Solutions (SIMOS) certified begins with Cisco 300-209 preparation products which designed to deliver the Refined 300-209 questions by making you pass the 300-209 test at your first time. Try the free 300-209 demo right now.


2026 New 300-209 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/300-209/

Q1. Scenario 

Your organization has just implemented a Cisco AnyConnect SSL VPN solution. Using Cisco ASDM, answer the questions regarding the implementation. 

Note: Not all screens or option selections are active for this exercise. 

Topology 

Default_Home 

Which two networks will be included in the secured VPN tunnel? (Choose two.) 

A. 10.10.0.0/16 

B. All networks will be securely tunneled 

C. Networks with a source of any4 

D. 10.10.9.0/24 

E. DMZ network 

Answer: A,E 

Explanation: 

Navigate to the Configuration -> Remote Access -> Group Policies tab to observe the following: 

Then, click on the DlftGrpPolicy to see the following: 

On the left side, select “Split Tunneling” to get to this page: 

Here you see that the Network List called “Inside Subnets” is being tunneled (secured). Select Manage to see the list of networks 

Here we see that the 10.10.0.0/16 and DMZ networks are being secured over the tunnel. 

Q2. Scenario: 

You are the senior network security administrator for your organization. Recently and junior engineer configured a site-to-site IPsec VPN connection between your headquarters Cisco ASA and a remote branch office. 

You are now tasked with verifying the IKEvl IPsec installation to ensure it was properly configured according to designated parameters. Using the CLI on both the Cisco ASA and branch ISR, verify the IPsec configuration is properly configured between the two sites. 

NOTE: the show running-config command cannot be used for this exercise. 

Topology: 

In what state is the IKE security association in on the Cisco ASA? 

A. There are no security associations in place 

B. MM_ACTIVE 

C. ACTIVE(ACTIVE) 

D. QM_IDLE 

Answer:

Explanation: 

This can be seen from the "show crypto isa sa" command: 

Q3. You are troubleshooting a DMVPN NHRP registration failure. Which command can you use to view request counters? 

A. show ip nhrp nhs detail 

B. show ip nhrp tunnel 

C. show ip nhrp incomplete 

D. show ip nhrp incomplete tunnel tunnel_interface_number 

Answer:

Q4. Which two are features of GETVPN but not DMVPN and FlexVPN?.(Choose two.) 

A. one IPsec SA for all encrypted traffic 

B. no requirement for an overlay routing protocol 

C. design for use over public or private WAN 

D. sequence numbers that enable scalable replay checking 

E. enabled use of ESP or AH 

F. preservation of IP protocol in outer header 

Answer: A,B 

Q5. Refer to the exhibit. 

Which type of VPN implementation is displayed? 

A. IKEv2 reconnect 

B. IKEv1 cluster 

C. IKEv2 load balancer 

D. IKEv1 client 

E. IPsec high availability 

F. IKEv2 backup gateway 

Answer:

Q6. Which technology must be installed on the client computer to enable users to launch applications from a Clientless SSL VPN? 

A. Java 

B. QuickTime plug-in 

C. Silverlight 

D. Flash 

Answer:

Q7. Which option is an example of an asymmetric algorithm? 

A. 3DES 

B. IDEA 

C. AES 

D. RSA 

Answer:

Q8. A user with IP address 10.10.10.10 is unable to access a HTTP website at IP address 

209.165.200.225 through a Cisco ASA. Which two features and commands will help troubleshoot the issue? (Choose two.) 

A. Capture user traffic using command capture capin interface inside match ip host 10.10.10.10 any 

B. After verifying that user traffic reaches the firewall using syslogs or captures, use packet tracer command packet-tracer input inside tcp 10.10.10.10 1234 209.165.200.225 80 

C. Enable logging at level 1 and check the syslogs using commands logging enable, logging buffered 1 and show logging | include 10.10.10.10 

D. Check if an access-list on the firewall is blocking the user by using command show running-config access-list | include 10.10.10.10 

E. Use packet tracer command packet-tracer input inside udp 0.10.10.10 1234192.168.1.3 161 to see what the firewall is doing with the user's traffic 

Answer: A,B 

Q9. On which Cisco platform are dynamic virtual template interfaces available? 

A. Cisco Adaptive Security Appliance 5585-X 

B. Cisco Catalyst 3750X 

C. Cisco Integrated Services Router Generation 2 

D. Cisco Nexus 7000 

Answer:

Q10. Which option is a possible solution if you cannot access a URL through clientless SSL VPN with Internet Explorer, while other browsers work fine? 

A. Verify the trusted zone and cookies settings in your browser. 

B. Make sure that you specified the URL correctly. 

C. Try the URL from another operating system. 

D. Move to the IPsec client. 

Answer: