we provide Real Cisco 300-360 exam fees which are the best for clearing 300-360 test, and to get certified by Cisco Designing Cisco Wireless Enterprise Networks. The 300-360 Questions & Answers covers all the knowledge points of the real 300-360 exam. Crack your Cisco 300-360 Exam with latest dumps, guaranteed!


2026 New 300-360 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/300-360/

Q1. Which two best practices should be considered when a customer wants to purchase and implement Voice over Wireless for Cisco 7925 IP Phones? (Choose two.)

A. Enable lower data rates for 2.4-GHz data WLAN and higher data rates for phones.

B. Use a separate Cisco Wireless Lan Controller.

C. Enable 802.1x and Cisco Centralized Key Management for phone authentication.

D. Use dedicated Access Points only for Voice over Wireless.

E. Set data for 2.4 GHz and voice for 5 GHz using separate SSIDs.

Answer: C,E

Q2. When conducting a wireless survey at a customer facility, signal attenuation in an area that is surrounded by thick glass walls is noted as 2dB. When configuring Cisco Prime Infrastructure, which obstacle should be placed in a map editor to represent the impact the glass wall will have on the RF signal in the facility?

A. heavy door

B. thick wall

C. glass

D. light wall

Answer: D

Explanation: Reference: http://www.cisco.com/c/en/us/td/docs/wireless/prime_infrastructure/1-2/configuration/guide/pi_12_cg/maps.html Table 6-4

Q3. A customer is deploying a Greenfield 802.11ac network on a floor that will support approximately 300 wireless devices. Which setting needs to be changed on Prime Infrastructure Planning Tool in order to predict the amount of access points the customer needs to service the new floor?

A. Data Coverage Support Margin

B. Demand Settings

C. Add AP Field

D. 802.11n Protocol Support

Answer: B

Explanation: Reference: http://www.cisco.com/c/en/us/td/docs/wireless/prime_infrastructure/1-2/configuration/guide/pi_12_cg/maps.html#pgfId-1671104

Q4. Cisco 7925G phones are experiencing intermittent connectivity issues. The wireless survey reveals that the facility has no current coverage holes. The radios on the 2.4GHz channel have all been statically set to power level 1. Which two reasons could explain why the phones are having issues on this wireless network? (Choose two.)

A. The phones are experiencing excessive co-channel interference.

B. The phones only operate on the 2.4 GHz band when the power level is above 25 mW.

C. The phones are not transmitting at the same power levels as the access points.

D. The phones are experiencing delays of less than 30 ms within their coverage cell.

E. The phones are receiving greater than -67 dBm RSSI on the 2.4 GHz band.

Answer: A,C

Q5. What is the recommended minimum speed at the edge of the cells in an 802.11g network for a good Cisco VoWLAN deployment?

A. 11 Mb/s

B. 36 Mb/s

C. 12 Mb/s

D. 18 Mb/s

Answer: C

Q6. A customer has a business-critical voice network and wants to be alerted whenever voice clients move out of a coverage area and experience RSSI below -67 dBm on the 5 GHz band. Which option can be configured on the wireless controller to alert network administrators when this limit is surpassed?

A. EDCA; voice optimized

B. SIP voice sample interval

C. 802.11a voice RSSI coverage threshold

D. traffic stream metrics

Answer: C

Q7. Which two options describe best practices that must be completed after a wireless installation is finished?

(Choose two.)

A. Make sure that there are no spaces between the devices on the rack that the Wireless Lan Controller isinstalled.

B. Consult with the customer to ensure that the IT staff has a complete set of design and installationdocuments.

C. Make sure the customer is aware that they should consider purchasing a support contract immediately afterthe installation is complete.

D. Spend time with the customer to show them the controller GUI and inform them how they can reach theCisco TAC if they have any problems.

E. Test all the customer’s wireless devices and applications to ensure they are working properly.

Answer: B,E

Q8. An engineer is performing a predictive wireless design for a Parts Distribution Center, which requires data and location services. Which three requirements are inputs to the design? (Choose three.)

A. access points with directional antennas

B. continuous -67 dBm coverage from one access point

C. overlapping -75 dBm coverage from three access points

D. overlapping -67 dBm coverage from two access points

E. access points in IPS mode

F. continuous -72 dBm coverage from one access point

G. access points in corners and along perimeters

Answer: B,C,G

Explanation: Reference: http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Mobility/WiFiLBS- DG/wifich5.html

Q9. Which two steps are associated with the active portion of the audit when a post-installation audit is performed with an auditing tool such as Ekahau? (Choose two.)

A. Check for co-channel interference by standing near an access point on one channel and watching for other access points that are on the same channel.

B. Verify smooth roaming.

C. Check to see if the signal level on other access points that are heard on the same channel is at least 19dBm weaker than the access point that you are next to.

D. Check that all channels are supported by the APs, regardless of client capabilities.

E. Verify that the network traffic of physical data rate and packet loss meets user requirements.

Answer: B,E

Q10. An engineer is preparing for an indoor wireless LAN survey and is provisioning a survey kit. Which three pieces of equipment should be included? (Choose three.)

A. external connector access point

B. integrated antenna access point

C. coax low-loss cable

D. battery operated power supply

E. range finder

F. Yagi antennas

Answer: B,D,E