we provide 100% Correct Cisco 300-370 exam guide which are the best for clearing 300-370 test, and to get certified by Cisco Troubleshooting Cisco Wireless Enterprise Network. The 300-370 Questions & Answers covers all the knowledge points of the real 300-370 exam. Crack your Cisco 300-370 Exam with latest dumps, guaranteed!


2026 New 300-370 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/300-370/

Q1. Access points ate deployed in an office building and users report that the real-time communications quality of experience is poor when users walk between the elevators The elevators are a heavy metallic obstacle, and AP 3 was installed to cover the elevator area, which AP t and AP 2 signal does not reach Communications are captured for a user walking from point A to point C. and it is observed that the user iPhone device suddenly scans all bands and then roams from AP I to AP 3 somewhere between points B and C WLAN is set to 5 GHz only. Open, default rate configuration. Which action improves the real-time application quality of experience in this area? 

Refer to the exhibit. 

A. Enable 802 11v on the WLAN 

B. Enable 802 11r on the WLAN 

C. Enable 802 11k on the WLAN 

D. Move AP 2 to point B 

Answer: B 

Q2. An engineer has configured 802 1x for the network and all but one of the APs are passing authentication. Which configuration is causing the failure? 

A. The AP has override global credentials checked. 

B. The switch AAA credentials do not match what is configured on ISE. 

C. The controller 802 1x supplicant credentials do not match what is configured on ISE 

D. EAP-FAST is configured on ISE for this AP. 

Answer: A 

Q3. In a cisco OfficeExtend environment, which encryption type n und between the access point and the mass LAW controller? 

A. DTLS 

B. TIS 

C. STIS 

D. OpenSSL 

Answer: A 

Q4. Which ports require unrestricted port access for CleanAir RF spectrum analysis between the AP and Cisco Spectrum Expert? 

A. UDP 5246 and 5247 

B. UDP 37540 and 37550 

C. TCP 16113 and 16114 

D. TCP 37540 and 37550 

E. TCP 5246 and 5247 

F. UDP 16113and 16114 

Answer: D 

Q5. An engineer has run the debug dhcp packet enable command on the wireless LAN controller CLI. Which field contacts the IP address offered to the client? 

A. siaddr 

B. ciaddr 

C. chaddr 

D. yiaddr 

E. giaddr 

Answer: C 

Q6. An engineer has received an alarm on a wireless LAN controller and is unsure of its meaning. The engineer attempted to ping the wireless LAN controller interfaces. Which troubleshooting methodology does this action demonstrate? 

A. bottom-up 

B. follow the path 

C. shoot from the hip 

D. top-down 

E. divide and conquer 

Answer: E 

Q7. A client is failing EAP authentication and a debug shows that the server is sending an Access-Reject message. Which action must you take to resolve authentication? 

A. Verify that the Validate server certificate on the client is disabled. 

B. Verify that the client certificates are from the proper CA and server certificate. 

C. Verify that the client server certificate has the proper Windows OlDs. 

D. Verify that the user account is the same in the client certificate. 

E. Verify that the user is using the same password that is on the server 

Answer: B 

Q8. An alarm is reporting that one of four ports of a lag group have gone down on a wireless LAN controller. Which troubleshooting methodology can be used to begin the troubleshooting process? 

A. shoot from the hip 

B. bottom-up 

C. top-down 

D. follow the path 

E. divide and conquer 

Answer: B 

Q9. Employees upgraded company issued OS devices. Which are configured to authenticate to the network using WPA2-Eniefpnse 802 lx with LEAP As a result, the devices are no longer able to authenticate Which action must the engineer do 10 resolve the issue? 

Refer to the exhibit. 

A. Redeploy the existing configuration profile. 

B. Change LEAP certificate on the ACS server. 

C. Reset the network settings on the devices. 

D. Rejoin the enterprise network manually. 

E. Deploy a new configuration profile with LEAP enabled 

Answer: B 

Q10. A mobile workstation in a factory contains an AP that is configured as a workgroup bridge. When the workstation moves, it loses connectivity and disrupts operation. What can the engineer implement to minimize roaming problems? 

A. Use 802.1X authentication. 

B. Use Cisco Centralized Key Management for fast roaming. 

C. Use AES for encryption. 

D. Use the mobile station command. 

Answer: B