Cause all that matters here is passing the Cisco 300-370 exam. Cause all that you need is a high score of 300-370 Troubleshooting Cisco Wireless Enterprise Network exam. The only one thing you need to do is downloading Pass4sure 300-370 exam study guides now. We will not let you down with our money-back guarantee.
2026 New 300-370 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/300-370/
Q1. Which statement describes how the Hand Select feature works on the wireless controller? Refer to the exhibit.
A. The access point uses the load balancing feature to move the clients to 5 Ghz.
B. The access point changes the DTIM period on the 2 4 Ghz band.
C. The access point recommends the band in the association response to the client.
D. The access point ignores and delays the probe request of the client on the 2 4 Ghz.
Answer: C
Q2. Two 5508 Wireless Lan Controllers are managing all Access Points throughout the network The WLCs are located in different locations to provide geographical redundancy A Mobility Group has been configured on both WLCs and has a UP status on both Controllers The APs m location A are statically configured to use Controller A as the Primary and Controller B as the Secondary If the WLC in location A goes offline, the APs successfully join the WLC m location B but they do not failover to their Primary configured Controller What configuration task will fix this issue'
A. Change the AP Failover Priority to critical.
B. Enable AP Fallback globally on the WLC.
C. Configure the WLC in location A as Primary using the CAPWAP AP Controller IP Address command on all the location A Access Points.
D. Use DHCP Option 43 and specify WLC in location A as Primary.
Answer: C
Q3. When implementing interface groups, how are the IP addresses sourced via DHCP for wireless clients?
A. through the primary interface of the group
B. through round robin between interfaces
C. through interface group definition
D. through the interface receiving the first response
Answer: B
Q4. A client is failing EAP authentication and a debug shows that the server is sending an Access-Reject message. Which action must you take to resolve authentication?
A. Verify that the Validate server certificate on the client is disabled.
B. Verify that the client certificates are from the proper CA and server certificate.
C. Verify that the client server certificate has the proper Windows OlDs.
D. Verify that the user account is the same in the client certificate.
E. Verify that the user is using the same password that is on the server
Answer: B
Q5. A recently acquired Cisco Aironet 1550 series AP is unable to join the WLC. This message is observed on the AP console:
AAA Authentication Failure for UserName:CC93.1981.0035 User Type: WLAN USER
Which action must be taken for the AP to associate with the controller?
A. Add MAC address CC93.1981.0035 to the Security AAA AP policy Authorization List.
B. Authenticate the AP to the WLC from the console using an admin account on the WLC.
C. Add MAC address CC93.1981.035 to the Security AAA MAC Filtering tab.
D. Import the self-signed certificate of the AP to the Security:Certificate:LSC tab.
E. Import the self-signed certificate of the AP to the Security:Certificate:SSC tab.
Answer: A
Q6. An engineer is troubleshooting non-802.11 interference and observes the shown output. Which interference signature is the most harmful to Wi-Fi?
Refer to the exhibit.
A. cordless phone
B. microwave oven
C. 2 4 GHz wideband jammer
D. FHSS Bluetooth
E. analog video camera
Answer: A
Q7. Which feature should a network engineer enable within a mixed-client network to ensure that the legacy client operates at the best possible rates?
A. ClientLink
B. RRM
C. DCA
D. Band Select
Answer: A
Q8. Which statement about the join process of the access point is true? Refer to the exhibit.
A. The time on the controller is outside of the certificates validity time interval, so the join phase failed.
B. The AP successfully joined the controller.
C. The AP moved from this controller to its primary controller.
D. The AP failed to join because the MAC address of the AP was not correct on the controller.
E. The controller rejected all discovery requests from the AP because they were not received on the management interface subnet.
Answer: E
Q9. Which ports require unrestricted port access for CleanAir RF spectrum analysis between the AP and Cisco Spectrum Expert?
A. UDP 5246 and 5247
B. UDP 37540 and 37550
C. TCP 16113 and 16114
D. TCP 37540 and 37550
E. TCP 5246 and 5247
F. UDP 16113and 16114
Answer: D
Q10. An engineer is creating a custom rogue classification rule directly on a controller. Which two conditions are possible when adding a custom rule to a controller? (Choose two.)
A. internal
B. ad hoc
C. client-count
D. duration
E. WLAN
F. open authentication
Answer: A,D