A Review Of High quality 300-370 exam dumps

Q1. Two 5508 Wireless Lan Controllers are managing all Access Points throughout the network The WLCs are located in different locations to provide geographical redundancy A Mobility Group has been configured on both WLCs and has a UP status on both Controllers The APs m location A are statically configured to use Controller A as the Primary and Controller B as the Secondary If the WLC in location A goes offline, the APs successfully join the WLC m location B but they do not failover to their Primary configured Controller What configuration task will fix this issue' 

A. Change the AP Failover Priority to critical. 

B. Enable AP Fallback globally on the WLC. 

C. Configure the WLC in location A as Primary using the CAPWAP AP Controller IP Address command on all the location A Access Points. 

D. Use DHCP Option 43 and specify WLC in location A as Primary. 

View Answer

Q2. An engineer is troubleshooting non-802 11 interference and observes this output. Which type of interference signatures can the engineer identify? 

Refer to the exhibit. 

A. microwave 

B. DECT phone 

C. Bluetooth 

D. jammer 

View Answer

Q3. Which visual cue accurately describes a characteristic of the zone of impact displayed in Cisco Prime Infrastructure? 

A. The closer the cirlce is to blue, the more localized the impact is. 

B. The smaller the circle, the more localized the impact is. 

C. The larger the circle, the more severe the impact is. 

D. The more translucent the circle is, the more localized the impact is. 

View Answer

Q4. A wireless engineer is unable to join lightweight access points to the Cisco Wireless Controller. The access points receive ip addresses from a DHCP pool configured on the core switch. Which action must be taken to resolve the issue? 

A. Upgrade the Wireless Controller to a newer IOS release. 

B. Configure option 43 on the DHCP pool. 

C. Configure option 82 on the Wireless controller. 

D. Change the management ip address on the Wireless Controller. 

View Answer

Q5. Scenario 

The Big Engineering IT team has been working in the lab to do some testing of some new features the existing network won't support. They are AP Croups, AP Failover, and Local Web Auth. They have been having problems with all three features. In this test environment the controllers only support the Composite and Structural Engineering and Aerodynamic Engineering groups. All SSIDs should omit the department name. Refer to the exhibit. This is a diagram of the floor plan for the Big Engineering office and the distribution of the departments. The tables below show how the controllers have been configured. 

Note, not all menu items, text boxes, or radio buttons are active. 

When you review the configuration of the test network controller what needs to be changed to resolve the problems? (Choose four.) 

A. Change the High Availability Primary Controller Management Interface IP address. 

B. Remove the current WLANs and replace them with WLANs that have the same SSID names as on the AE-2504A controller. 

C. Add the Local Net User names and passwords 

D. Change the Layer 2 security to none and Layer 3 Security to Web Policy for the CSE-Contractors WLAN 

E. Remove me current WLAN from the CSE-WLAN AP Group and add all three of the WLANs configured in the CSE-2504A 

F. Add the CSE APs to the CSE-WLANs AP-Group. 

View Answer

Q6. Which statement about the join process of the access point is true? Refer to the exhibit. 

A. The time on the controller is outside of the certificates validity time interval, so the join phase failed. 

B. The AP successfully joined the controller. 

C. The AP moved from this controller to its primary controller. 

D. The AP failed to join because the MAC address of the AP was not correct on the controller. 

E. The controller rejected all discovery requests from the AP because they were not received on the management interface subnet. 

View Answer

Q7. A mobile station in a factory contains an AP configured as a work group bridge that authenticates to a root AP using EAP-FAST. To be able to use the mobile station in further parts of the factory, another root AP is installed and also configured for EAP-FAST When the mobile station is attempting to roam to the other AP, it loses connection yet can still authenticate to the first one. What is the cause for the failed authentication on RAP2? 

Refer to the exhibit. 

A. RAP1 is using a different authentication protocol than RAP2. 

B. RAP2 has a different SSID than RAP1. 

C. RAP1 is using a different encryption than RAP2. 

D. The authentication usemame and password is different. 

View Answer

Q8. Employees upgraded company issued OS devices. Which are configured to authenticate to the network using WPA2-Eniefpnse 802 lx with LEAP As a result, the devices are no longer able to authenticate Which action must the engineer do 10 resolve the issue? 

Refer to the exhibit. 

A. Redeploy the existing configuration profile. 

B. Change LEAP certificate on the ACS server. 

C. Reset the network settings on the devices. 

D. Rejoin the enterprise network manually. 

E. Deploy a new configuration profile with LEAP enabled 

View Answer

Q9. Which statement about the join process of the access point is true? Refer to the exhibit. 

A. The time on the controller is outside of the certificates validity time interval, so the join phase failed. 

B. The AP moved from this controller to its primary controller. 

C. The controller rejected most of the discovery requests from the AP because they were not received on the management interface subnet. The AP failed to join the controller. 

D. The AP successfully joined the controller. 

E. The AP failed to join because the self-signed certificate of the AP on the controller was not correct. 

View Answer

Q10. When implementing interface groups, how are the IP addresses sourced via DHCP for wireless clients? 

A. through the primary interface of the group 

B. through round robin between interfaces 

C. through interface group definition 

D. through the interface receiving the first response 

View Answer