Pinpoint of 300-460 free draindumps materials and answers for Cisco certification for IT examinee, Real Success Guaranteed with Updated 300-460 pdf dumps vce Materials. 100% PASS Implementing and Troubleshooting the Cisco Cloud Infrastructure (CLDINF) exam Today!
2026 New 300-460 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/300-460/
Q1. Which option describes the function of an initiator in Storage Area Networking?
A. stats a connection over the fabric to one or more ports
B. provides a network infrastructure consisting of one or more Fibre Channel switches
C. creates a connection over the fabric to one or more initiator ports
D. an endpoint that receives data in the SAN infrastructure
Answer: D
Q2. Which option lists the steps to configure a Cisco UCS B-Series server for jumbo frames and the Cisco Discovery Protocol?
A. On the Servers tab, set CDP enabled under the vNIC interface.
Set the vHBA MTU to 9000.
Assign the network control policy to the vHBA.
B. On the Servers tab, create a network control policy with CDP enabled.
On the vNIC select the jumbo-frame checkbox.
Assign the network control policy to the vNIC.
C. On the LAN tab, create a network control policy with CDP enabled.
Create a vNIC with an MTU of 9000.
Assign the network control policy to the vNIC.
D. On the LAN tab, create a vHBA template with an MTU of 9216.
Select the CDP checkbox.
Assign the network control policy to the vHBA.
Answer: D
Q3. Which configuration provides the highest performance level to Virtual Extensible LAN?
A. VxLAN in unicast mode with VxLAN TSO offload in Cisco UCS
B. VxLAN in multicast mode with MAC distribution
C. VxLAN in multicast mode with VxLAN TSO offload in Cisco UCS
D. VxLAN in unicast mode with MAC distribution and VxLAN TSO offload in Cisco UCS
Answer: C
Q4. An administrator is troubleshooting basic connectivity between two Fibre Channel points that include node hops and latency data. Which tool is the best for troubleshooting this scenario?
A. ping
B. fctraceroute
C. traceroute
D. fcping
Answer: B
Reference: Ping and traceroute are two of the most useful tools for troubleshooting TCP/IP networking problems. The ping utility generates a series of.echopackets to a destination across a TCP/IP internetwork. When the echo packets arrive at the destination, they are rerouted and sent back to the source. Using ping, you can verify connectivity and latency to a particular destination across an IP routed network.
The traceroute utility operates in a similar fashion, but can also determine the specific path that a frame takes to its destination on a hop-by-hop basis.
Q5. Which four fields are needed when creating a WWPN pool in Cisco UCS Director? (Choose four)
A. the first and last WWPN address in the block
B. the number of WWPN addresses in the block
C. a unique name for the initiator
D. the first WWPN address in the block
E. the WWN for the initiator
F. a unique name for the pool
G. the last WWPN address in the block
H. a description for the pool
Answer: A,B,F,H
Reference: http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-2/b_UCSM_GUI_Configuration_Guide_2_2/b_UCSM_GUI_Configuration_Guide_2_2_cha pter_011001.html#task_8717496137259896828
Q6. Which option describes a function of a target in Storage Area Networking?
A. starts a connection over the fabric to one or more ports
B. delivers storage volumes to the initiators from the storage system
C. provides a storage network consisting of one or more Fibre Channel switches
D. consumes storage volumes using a host bus adapter
Answer: B
Q7. Which Cisco Nexus 1000V configuration implements VxLAN segment 5001 as unicast and segment 5002 as multicast?
A. bridge-domain bd-5001 segment id 5001 no segment distribution mac ! Bridge-domain bd-5002 segment id 5002 group 239.1.1.2
B. segment mode multicast bridge-domain bd-5001 segment id 5001 segment mode unicast-only ! Bridge-domain bd-5002 segment id 5002 group 239.1.1.2 segment mode multicast
C. segment mode unicast-only bridge-domain bd-5001 segment id 5001 ! Bridge-domain bd-5002 segment id 5002 group 239.1.1.2 no segment mode unicast-only
D. segment mode unicast-only bridge-domain bd-5001 segment id 5001 ! Bridge-domain bd-5002 segment id 5002
Answer: C
Reference: http://www.cisco.com/c/en/us/products/collateral/switches/nexus-7000-series-switches/guide_c07-728863.html
Q8. Refer to the exhibit. Which three commands complete the configuration for this Cisco Nexus 1000V port profile that is assigned to a vmkernel used for VSM control plane? (Choose three.)
A. service-policy type qos output vmk-control
B. vmware port-group
C. system vlan 119
D. capability 13control
E. swithchport mode trunk
F. mtu 9000
Answer: B,C,D
Q9. Which option is the best way to provide templates to end users in Cisco UCS Director?
A. Give access to the template.
B. Assign the template to the standard catalog.
C. Assign the template to the advance catalog.
D. Deploy a copied template.
Answer: B
Q10. Which four issues are often detected when validating workflows in Cisco UCS Director? (Choose four.)
A. Task Handler not found
B. missing admin/task inputs after import or upgrade
C. mapping mismatch
D. version incompatibilities
E. debugging logging information
F. missing optional values for tasks
G. missing task action value
H. missing mandatory values for tasks
Answer: A,B,C,H
Reference: Section Workflow validation of the link: http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-director/orchestration-guide/5-4/b_UCS_Director_Orchestration_Guide_5_4/b_UCS_Director_Orchestration_Guide_5_4_ chapter_011.html