Your success in Cisco 352-001 is our sole target and we develop all our 352-001 braindumps in a way that facilitates the attainment of this target. Not only is our 352-001 study material the best you can find, it is also the most detailed and the most updated. 352-001 Practice Exams for Cisco CCDE 352-001 are written to the highest standards of technical accuracy.


2026 New 352-001 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/352-001/

Q1. When creating a network design, which one of these options provides for basic Layer 2 client isolation to prevent broadcast traffic exposure? 

A. SVI 

B. VLAN 

C. routed port 

D. edge port 

Answer: B 

Q2. The network administrator of a branch office network has decided to deploy Unicast RPF at the access layer. He insists that the design must guarantee that all the packets arriving on the router interfaces are assigned to the same interface subnet. 

Which mode of Unicast RPF would you recommend as the lead network designer? 

A. uRPF strict mode 

B. uRPF loose mode 

C. uRPF VRF mode 

D. RPF feasible mode 

Answer: A 

Q3. During a network design review, it is recommended that the network with a single large area should be broken up into a backbone and multiple nonbackbone areas. There are differing opinions on how many ABRs are needed for each area for redundancy. What would be the impact of having additional ABRs per area? 

A. There is no impact to increasing the number of ABRs. 

B. The SPF calculations are more complex. 

C. The number of externals and network summaries are increased. 

D. The size of the FIB is increased. 

Answer: C 

Q4. A network designer has provisioned a router to use IPsec to encrypt the traffic over a GRE tunnel going to a web server at a remote location. From the router, the network designer can ping the web server, although the users in the office comment that they are unable to reach it. (Note: The DF bit is not set.) Which aspect should be changed in the design of the virtual connection? 

A. IP addresses of the GRE tunnel endpoints 

B. IPsec configuration 

C. MTU size on the GRE tunnel 

D. encapsulation of the GRE tunnel 

Answer: C 

Q5. You are tasked with implementing a 1000-phone remote access solution, where phones will traverse a WAN edge router. Assuming all of the following features are supported in a hardware-assisted manner, which of the following will have the most detrimental impact on the delay of the packet? 

A. encryption 

B. stateful firewall 

C. MPLS encapsulation 

D. GRE encapsulation 

Answer: A 

Q6. A large service provider offers VoIP and Video services to business customers. Which three areas should the service provider monitor related to these services? (Choose three.) 

A. bandwidth utilization 

B. service response time 

C. packet loss 

D. jitter 

E. latency 

F. availability 

Answer: CDE 

Q7. You are hired to design a solution that will improve network availability for users on a campus network with routed access. If the budget limits you to three components, which three components would you recommend in your design proposal? (Choose three.) 

A. redundant power supplies in the access routers 

B. standby route processors for SSO in the core routers 

C. standby route processors for SSO in the distribution routers 

D. standby route processors for SSO in the access routers 

E. replace copper links between devices with fiber links 

Answer: ADE 

Q8. You are the lead network designer for an enterprise company called ABC, and you are leading design discussions regarding IPv6 implementation into their existing network. A question is raised regarding older Layer 2 switches that exist in the network, and if any changes are required to these Layer 2 switches for successful IPv6 implementation. Which two responses should you give? (Choose two.) 

A. IPv6 is transparent on Layer 2 switches, so there is no need to make any changes to the Layer 2 switches. 

B. If IPv6 anycast deployment is planned, then make sure that Layer 2 switches support ICMPv6 snooping at Layer 2 switches. 

C. If IPv6 anycast deployment is planned, then make sure that Layer 2 switches support DHCPv6 snooping at Layer 2 switches. 

D. If IPv6 multicast deployment is planned, then make sure that Layer 2 switches support MLD snooping at Layer 2 switches. 

E. If IPv6 anycast deployment is planned, then make sure that Layer 2 switches support ND snooping at Layer 2 switches. 

Answer: AD 

Q9. Which restriction prevents a designer from using a GDOI-based VPN to secure traffic that traverses the Internet? 

A. Enterprise host IP addresses are typically not routable. 

B. GDOI is less secure than traditional IPsec. 

C. Network address translation functions interfere with tunnel header preservation. 

D. The use of public addresses is not supported with GDOI. 

Answer: C 

Q10. You are redesigning an OSPF v2 network and must migrate some links. You are concerned that there are different subnet masks. Which two link types will still form an OSPF adjacency even if there are subnet mask mismatches? (Choose two.) 

A. virtual 

B. broadcast 

C. point-to-multipoint 

D. non-broadcast 

E. point-to-point 

Answer: AE