It is impossible to pass Cisco 352-001 exam without any help in the short term. Come to Actualtests soon and find the most advanced, correct and guaranteed Cisco 352-001 practice questions. You will get a surprising result by our Regenerate CCDE Written Exam practice guides.


2026 New 352-001 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/352-001/

Q1. Refer to the exhibit. 

You are designing an IPv4 unicast Layer 3 VPN load-balancing solution. Which L3VPN feature needs to be configured on the PE routers to support the design requirement? 

A. nonmatching route distinguishers 

B. matching route target values 

C. disable split horizon on PE2 and PE3 

D. matching route distinguishers 

Answer: A 

Q2. A network designer is working with a company to improve convergence at the Layer 2 control plane and decides to use LACP. Which of these components does LACP use to create the system ID? 

A. LACP system priority and switch MAC address 

B. LACP port priority and switch MAC address 

C. LACP port priority and port number 

D. LACP system priority and port number 

Answer: A 

Q3. AS100 and AS200 each have two peering points in different parts of their network. AS100 would like to use one of the links and keep the other link as backup. What should be changed for the design inside AS100 for prefixes received from AS200? 

A. MED 

B. weight 

C. AS-PATH 

D. local preference 

Answer: D 

Q4. Your company needs to baseline web traffic on a per-session basis for network application reporting. Which two mechanisms, when combined, fulfill the requirement? (Choose two.) 

A. Flexible Netflow 

B. Remote Monitoring 

C. Cisco IOS IP Service Level Agreement 

D. Class-Based Quality of Service Management Information Base 

E. Network-Based Application Recognition 

Answer: AE 

Q5. Which two OSPF design considerations should you implement to support the eventual growth of a network, so that CPU and memory are unaffected by the size and complexity of the link-state database in a large service provider network? (Choose two.) 

A. Turn on route dampening. 

B. Create network summaries. 

C. Turn on the Incremental SPF feature. 

D. Add more memory. 

E. Turn on packet pacing. 

F. Add redundancy between critical locations. 

Answer: CE 

Q6. What is a key benefit of a layered network design? 

A. cost savings 

B. increased security 

C. increased flexibility 

D. decreased broadcast 

Answer: C 

Q7. A customer is using a service provider to provide a WAN backbone for a 30-site network. In establishing the network, the customer must work within these constraints: 

The customer has a self-managed MPLS backbone. 

The VPLS WAN backbone of the service provider does not support PIM snooping. 

Multicast VPN must be used for multicast support inside some VRFs. 

What can the customer do so that multicast traffic is NOT flooded to all sites? 

A. Configure static GRE tunnels and run the MPLS and multicast VPN inside these GRE tunnels. 

B. Use Label Switched Multicast for the multicast transport. 

C. Use PIM-SSM as the multicast routing protocol with IETF Rosen Draft multicast VPN. 

D. Configure a static mapping between multicast addresses and MAC addresses. 

E. Use GET VPN to encrypt the multicast packets inside the WAN. 

Answer: A 

Q8. Service provider XYZ plans to provide dedicated Internet access and MPLS L3VPN services to business customers. XYZ has these design specifications: 

.  MP-BGP running on the core MPLS P routers with external Internet routes. 

. The core network will include 16 Point of Presence IP POPs throughout the Asia-Pacific region. . An additional nine non-P routers will use EBGP peering with multiple providers for Internet traffic. . An additional 50 PE routers will provide end customers with dedicated Internet access and L3VPN services throughout the Asia-Pacific region. 

In what two ways can the MP-BGP be removed from the MPLS P core routers and still provide dedicated Internet access and MPLS L3VPN services? (Choose two.) 

A. Disable BGP from the MPLS core P routers and have the MPLS core P routers run OSPF and LDP. 

B. Enable separate BGP control plane routers using a route reflector server concept that will be fully meshed with peer route reflector servers and have clients as MPLS PE routers and EBGP peering routers. 

C. Enable all EBGP routers as route reflector servers and MPLS PE routers as their clients. 

D. It is not possible to disable BGP from the MPLS core P routers without impacting the dedicated Internet access and MPLS L3VPN services. 

Answer: BC 

Q9. Your company experienced a number of network incidents that had a significant impact on business operations. Because a root cause cannot be identified, your CTO asks you to help the network management team implement the FCAPS framework. On which two areas would you provide guidance to the network management team? (Choose two.) 

A. change management 

B. accounting management 

C. service level management 

D. fault management 

Answer: BD 

Q10. A company wants a design that would support OSPF through a service provider ATM network. Which two OSPF network types should the designer use to establish OSPF neighborship between OSPF routers through the ATM network? (Choose two.) 

A. A broadcast network will always work through ATM networks. 

B. A broadcast network will work when the broadcast support is explicitly configured at the ATM network. 

C. Explicit neighbor statements are required when a nonbroadcast network is configured. 

D. Explicit neighbor statements are required when a point-to-multipoint network is configured. 

E. A nonbroadcast network does not require DR selection. 

Answer: BC