It is more faster and easier to pass the Cisco 600-210 exam by using Top Quality Cisco Implementing Cisco Service Provider Mobility UMTS Networks (SPUMTS) questuins and answers. Immediate access to the Down to date 600-210 Exam and find the same core area 600-210 questions with professionally verified answers, then PASS your exam with a high score now.
2026 New 600-210 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/600-210/
Q1. When Wi-Fi offloading is enabled, which authentication protocol is used by the TTG over the Wm interface to authenticate/retrieve subscription information at the time of PDP activation?
A. IPsec
B. EAP
C. SSL
D. CHAP
Answer: B
Q2. Refer to the exhibit.
The locally configured Diameter peer does not seem to be communicating with its remote peer. Which option describes the problem?
A. Ports are not correctly configured.
B. No common AVP was found during capabilities exchange procedure.
C. The transport layer connection is not established.
D. Diameter does not support TCP as a transport protocol.
Answer: C
Q3. In which two circumstances is Diameter Peer Discovery needed? (Choose two.)
A. The Diameter client is rejected by the peer.
B. The Diameter client must contact a first-hop Diameter agent.
C. The Diameter agent must reply to the connect request of a Diameter client.
D. The Diameter agent must search the next agent so that Diameter messages can reach the Diameter server.
E. The Diameter agent must close the session with a Diameter client.
Answer: B,D
Q4. Which two configurations are required for narrow band SS7 configuration in the Cisco ASR 5000 system? (Choose two.)
A. link type configuration in the SS7 routing domain
B. framing type configuration at the card level
C. SCCP network association at the port level
D. Iu-PS service association at the port level
E. peer server configuration at the SS7 routing domain
Answer: A,B
Q5. Which option lists the correct order of the SS7 routing flow in the Cisco ASR 5000 SGSN system?
A. The call control profile is checked for any rejection, then the map-service is checked for any form of routing definitions.
B. The map-service is checked for any form of routing definitions, then the call control profile is checked for any rejection.
C. The call control profile is checked for any rejection, then the SGSN-Service is checked for any rejection.
D. The SGSN service is checked for any rejection, then the call control profile is checked for any rejection.
Answer: A
Q6. Your company is adding additional subscriber IP network ranges and requires many-to-one NAT to be configured on the Cisco ASR 5000 for the subscriber IP network 10.11.23.0/24. The public IP range is 172.20.21.20 172.20.21.110, and each IP has no more than 100 subscribers.
Which configuration option accomplishes this task?
A. active-charging service ACS_ACME access-ruledef apn_cisco ip src-address = 10.11.23.0/24 fw-and-nat policy base_1 access-rule priority 1 access-ruledef apn_cisco permit nat-realm nat_pool1 nat policy nat-required default-nat-realm nat_pool1 rulebase acme_rulebase fw-and-nat default-policy base_1 context cisco ip pool nat_pool1 range 172.20.21.20 172.20.21.110 napt-users-per-ip-address 100
B. active-charging service ACS_ACME access-ruledef apn_cisco ip src-address = 10.11.0.0/16 fw-and-nat policy base_1 access-rule priority 1 access-ruledef apn_cisco permit nat-realm nat_pool1 nat policy nat-required default-nat-realm nat_pool1 rulebase acme_rulebase fw-and-nat default-policy base_1 context cisco ip pool nat_pool1 range 172.20.21.20 172.20.21.110 napt-users-per-ip-address 1000
C. active-charging service ACS_ACME access-ruledef apn_cisco ip src-address = 10.11.23.0/24 nat-and-pat policy nat_1 access-rule priority 1 access-ruledef apn_cisco permit nat-realm nat_pool1 nat policy nat-required default-nat-realm nat_pool1 context cisco ip pool nat_pool1 range 172.20.21.20 172.20.21.29 napt-users-per-ip-address 100
D. active-charging service ACS_ACME access-ruledef apn_cisco ip src-address = 10.11.23.0/24 fw-and-nat policy base_1 access-rule priority 1 access-ruledef apn_cisco permit nat-realm nat_pool1 nat policy nat-required default-nat-realm nat_pool1 rulebase acme_rulebase fw-and-nat default-policy base_1 context cisco ip pool nat_pool1 range 172.20.21.20 172.20.21.29 napt-users-per-ip-address 100
Answer: A
Q7. Which action does an S4-SGSN take when it receives a secondary PDP context request from the UE?
A. A bearer resource command is sent to the SGW.
B. A create bearer request is sent to the SGW.
C. A create session request is sent to the SGW.
D. A create PDP context request is sent to the SGW.
Answer: A
Q8. Which two options describe two reasons for deploying MPLS on GGSN? (Choose two.)
A. Ensure faster routing.
B. Replace RIP.
C. Allow overlapping IP addressing in different APNs.
D. Segregate corporate APN traffic.
E. Replace GRE tunnels.
Answer: C,D
Q9. Refer to the exhibit.
Which two rating groups would be included within the AVP Multiple-Services-Credit-Control within the CCR-I message by the Cisco ASR 5000 GGSN? (Choose two.)
A. 100
B. 400
C. 300
D. 200
E. 500
Answer: C,D
Q10. Which option lists the contents of the flow label in a GTPv0 header?
A. IMSI and NSAPI
B. MSISDN and NSAPI
C. IMEI and NSAPI
D. IMSI and Transaction Identifier
E. IMEI and Transaction Identifier
Answer: A