Cause all that matters here is passing the Cisco 642-885 exam. Cause all that you need is a high score of 642-885 Deploying Cisco Service Provider Advanced Routing (SPADVOUTE) exam. The only one thing you need to do is downloading Testking 642-885 exam study guides now. We will not let you down with our money-back guarantee.


2026 New 642-885 Exam Dumps with PDF and VCE Free: https://www.surepassexam.com/642-885-exam-dumps.html

Q1. On Cisco IOS-XR, which BGP process can be distributed into multiple instances? 

A. BGP process manager 

B. BGP RIB process 

C. BGP speaker process 

D. BGP scanner process 

E. BGP dampening process 

Answer: C 

Q2. Which type of BGP session behaves like an EBGP session during session establishment but behaves like an IBGP session when propagating routing updates where the local preference, multi-exit discriminator, and next-hop attributes are not changed? 

A. BGP sessions between a route reflector and its clients 

B. BGP sessions between a route reflector and its non-client IBGP peers 

C. BGP sessions between a route reflector and another route reflector 

D. Intra-confederation IBGP sessions 

E. Intra-confederation EBGP sessions 

Answer: E 

Q3. Refer to the Cisco IOS-XR show output exhibit. 

Which statement is correct? 

A. The [ ] indicates the configuration has a problem 

B. The [ ] indicates the 10.1.1.1 neighbor peering session has not been established 

C. The [ ] indicates the configuration was not inherited from a group 

D. The [ ] indicates the configuration has not been committed 

E. The [ ] indicates the corresponding BGP peer configuration has a mismatch configuration 

Answer: C 

Q4. Which multicast group range is reserved for SSM? 

A. 224.0.0.0/8 

B. 225.0.0.0/8 

C. 232.0.0.0/8 

D. 239.0.0.0/8 

Answer: C 

Q5. Which router Is configured as the RPforthe 234.1.1.1 multicast group and which Is the multicast source that is currently sending traffic to the 234.1.1.1 multicast group? (Choose two.) 

A. CE5 

B. PE5 

C. PE6 

D. 10.5.10.1 

E. 10.5.1.1 

F. 192.168.156.60 

Answer: C,E #show ip mroute234.1.1.1 #show ip route 

Q6. Which field in the IPv6 header can be used to set the DSCP value? 

A. Flow Label 

B. Type of Service 

C. Traffic Class 

D. Precedence 

E. EXP 

Answer: C 

Q7. Which three statements regarding the BGP operations are correct? (Choose three) 

A. PE5 is the route reflector with P1 and PE6 as its client 

B. PE5 is using the IS-IS route to reach the BGP next-hop for the 172.16.66.0/24 prefix 

C. PE5 has BGP route dampening enabled 

D. The BGP session between PE5 and P1 is established using the loopback interface and next- hop-self 

E. The BGP session between PE5 and CE5 is established using the loopback interface 

Answer: A,C,D 

Q8. Refer to the exhibit. 

Which statement correctly explains the bgp graceful-restart command? 

A. This command is used to enable NSR and is entered on the NSR-capable router, and also on any NSR-aware peer 

B. This command is used to enable NSF and is entered on the NSF-capable router, and also on any NSF-aware peer 

C. This command is only required on the NSF-capable routers to enable BGP graceful restart with the BGP peers 

D. This command is only required on the NSF-aware routers to enable BGP graceful restart with the BGP peers 

E. This command is only required on the NSR-capable routers to enable BGP graceful restart with the BGP peers 

Answer: B 

Q9. The IPv6 2002::/16 prefix is used in which kind of implementations? 

A. 6RD 

B. 6to4 

C. NAT64 

D. IPv6 Multicast 

Answer: B 

Q10. When implementing Anycast RP, the RPs are also required to establish which kind of peering with each other? 

A. BGP 

B. Multiprotocol BGP 

C. MSDP 

D. Bidirectional PIM 

E. PIM SSM 

Answer: C