We provide real 640-878 exam questions and answers braindumps in two formats. Download PDF & Practice Tests. Pass Cisco 640-878 Exam quickly & easily. The 640-878 PDF type is available for reading and printing. You can print more and practice many times. With the help of our Cisco 640-878 dumps pdf and vce product and material, you can easily pass the 640-878 exam.
2026 New 640-878 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/640-878/
Q1. Which statement about Cisco IOS XE software is true?
A. It uses a two-stage configuration process.
B. It is identical in look and feel to Cisco IOS software.
C. It runs on the Cisco ASR 9010 platform.
D. Packages can be added using the install add and install activate commands.
E. It runs on the Cisco ME 3400 platform.
Answer: B
Q2. Which Cisco platform runs the Cisco IOS XE operating system?
A. Cisco ASR9K
B. Cisco CRS
C. Cisco 12000 GSR
D. Cisco ASR1K
E. Cisco ME 3400
F. Cisco ISR-G2
Answer: D
Q3. You want to configure HSRP between a Cisco IOS and a Cisco IOS XR router for the 192.0.2.0/24 subnet. Half of the PCs on the 192.0.2.0/24 subnet are configured to use 192.0.2.1 as the default gateway, and the other half of the PCs are configured to use 192.0.2.254 as the default gateway. The intent is to load balance the traffic across both routers.
Which two IOS and IOS XR configurations are needed? (Choose two.)
A.
! IOS-XR interface GigabitEthernet 0/0/0/0 ip address 192.0.2.3 255.255.255.0 router hsrp interface GigabitEthernet 0/0/0/0 hsrp 1 ipv4 192.0.2.1 hsrp 1 priority 95 hsrp 1 preempt hsrp 2 ipv4 192.0.2.254 hsrp 2 priority 105 hsrp 2 preempt
B.
! IOS-XR interface GigabitEthernet 0/0/0/0 ip address 192.0.2.1 255.255.255.0 router hsrp interface GigabitEthernet 0/0/0/0 hsrp 1 ipv4 192.0.2.1 hsrp 1 priority 99 hsrp 1 preempt hsrp 2 ipv4 192.0.2.254 hsrp 2 priority 101 hsrp 2 preempt
C.
! IOS-XR interface GigabitEthernet 0/0/0/0 ip address 192.0.2.3 255.255.255.0 router hsrp interface GigabitEthernet 0/0/0/0 hsrp 1 ipv4 192.0.2.1 hsrp 1 priority 1 hsrp 1 preempt hsrp 2 ipv4 192.0.2.254 hsrp 2 priority 1 hsrp 2 preempt
D.
! IOS interface GigabitEthernet 0/0 ip address 192.0.2.2 255.255.255.0 standby 1 ip 192.0.2.1 standby 1 priority 105 standby 1 preempt standby 2 ip 192.0.2.254 standby 2 priority 95 standby 2 preempt ! IOS interface GigabitEthernet 0/0 ip address 192.0.2.254 255.255.255.0 standby 1 ip 192.0.2.1 standby 1 preempt standby 2 ip 192.0.2.254 standby 2 preempt
E.
! IOS interface GigabitEthernet 0/0 ip address 192.0.2.2 255.255.255.0 standby 1 ip 192.0.2.1 standby 1 preempt standby 1 priority 2 standby 2 ip 192.0.2.254 standby 2 preempt standby 2 priority 2
Answer: A,D
Q4. Which type of service provider is responsible for offering backbone connectivity services to other service providers?
A. CSP
B. TSP
C. NSP
D. ISP
E. ASP
Answer: C
Q5. Within an MPLS domain, which table is used by the ingress edge LSR to make forwarding decisions when an unlabeled IP packet is received?
A. FIB
B. LFIB
C. LIB
D. MP-BGP
E. VRF
Answer: A
Q6. On Cisco IOS XR software, what is the default commit option?
A. best-effort
B. psuedo-atomic
C. replace
D. force
Answer: B
Refer to the show command exhibit.
***Exhibit is Missing***
Which statement is true?
A. It shows the result of the target configuration merged with the running configuration.
B. It shows the contents of the uncommitted configuration.
C. It shows the contents of the failed configuration.
D. It shows the contents of the running configuration.
Q7. Refer to the topology diagram in the exhibit.
***Exhibit is Missing***
Which two interface configuration commands on the Cisco ME 3400-1 switch Fa 0/1 interface are required to support the VLANs for Customer A to be trunked across the service provider network? (Choose two.)
A. switchport access vlan 30
B. switchport mode trunk
C. switchport mode dot1q-tunnel
D. switchport trunk allowed vlan 1-100
Answer: A,C
Q8. Refer to the Cisco IOS XR commands exhibit.
***Exhibit is Missing***
The router administrator is trying to activate a software package on the router but is not able to do so. Which statement about this problem is true?
A. The router needs to be in the global configuration mode.
B. The router needs to be in the admin global configuration mode.
C. The router needs to be in the admin EXEC mode.
D. The install activate command is not the correct command to use.
E. The administrator needs to log in as the "root" user instead of the "admin" user.
Answer: C
When upgrading a Cisco ASR 1001 Router, when is the request platform software package expand file bootflash:image-name command required?
A. to copy the consolidated Cisco IOS XE image to the bootflash:
B. to perform Cisco IOS ISSU on the standby route processor
C. to run the router using a consolidated package
D. to run the router using individual subpackages
Q9. Which first-hop router redundancy protocol uses the active virtual gateway to assign a virtual MAC address to the active virtual forwarders?
A. HSRP
B. VRRP
C. GLBP
D. FHRP
Answer: C
Q10. What is dual IOS mode on the Cisco ASR 1001 Router?
A. redundant IOS processes that are running on the active RP and standby RP
B. active and standby IOS processes that are running on a single RP
C. separate Cisco IOS XE and IOS XR processes that are running on a single RP
D. separate Cisco IOS XE and IOS XR processes that are running on two different RPs
E. checkpointed redundant IOS processes that are running on two different RPs in active/active mode
Answer: B