Proper study guides for Up to date Cisco Building Cisco Service Provider Next-Generation Networks, Part 2 certified begins with Cisco 640-878 preparation products which designed to deliver the High quality 640-878 questions by making you pass the 640-878 test at your first time. Try the free 640-878 demo right now.


2026 New 640-878 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/640-878/

Q1. Which Cisco IOS access list permits HTTP traffic that is sourced from host 10.1.129.100 port 3030 and that is destined to host 192.168.1.10? 

A. access-list 101 permit tcp any eq 3030 

B. access-list 101 permit tcp 10.1.128.0 0.0.1.255 eq 3030 192.168.1.0 0.0.0.15 eq www 

C. access-list 101 permit tcp 10.1.129.0 0.0.0.255 eq www 192.168.1.10 0.0.0.0 eq www 

D. access-list 101 permit tcp host 192.168.1.10 eq 80 10.1.0.0 0.0.255.255 eq 3030 

E. access-list 101 permit tcp 192.168.1.10 0.0.0.0 eq 80 10.1.0.0 0.0.255.255 

F. access-list 101 permit ip host 10.1.129.100 eq 3030 host 192.168.1.100 eq 80 

Answer: B 

Q2. Which spanning-tree mode uses the name command to configure a region name? 

A. MST 

B. PVST+ 

C. PVRST+ 

D. RSTP 

Answer: A 

Q3. Which statement about the benefits of MPLS PHP is true? 

A. PHP is implemented to increase the performance on the egress edge LSR. PHP allows the egress edge LSR to perform only one lookup to route the IP packet based on destination IP address and routing table. 

B. PHP is implemented to increase the performance on the egress edge LSR. PHP enables the egress edge LSR to perform only one lookup based on the ingress label. 

C. PHP is implemented to increase the performance on the egress edge LSR. PHP enables the egress edge LSR to perform two lookups, first lookup based on the ingress label and a second route lookup based on the destination IP address. 

D. PHP is implemented to increase the performance on the LSR (P routers). PHP enables the LSR (P routers) to perform only one lookup based on the ingress label. 

E. PHP is implemented to increase the performance on the LSR (P routers). PHP enables the LSR (P routers) to perform only one route lookup based on the destination IP address. 

F. PHP is implemented to increase the performance on the LSR (P routers). PHP enables the LSR (P routers) to perform two lookups, first lookup based on the ingress label and a second route lookup based on the destination IP address. 

G. PHP is implemented to increase the performance on the ingress edge LSR. PHP enables the ingress edge LSR to perform only one lookup based on the ingress label. 

H. PHP is implemented to increase the performance on the ingress edge LSR. PHP enables the ingress edge LSR to perform two lookups, first lookup based on the ingress label and a second route lookup based on the destination IP address. 

Answer: A 

Q4. Which type of service provider is responsible for offering backbone connectivity services to other service providers? 

A. CSP 

B. TSP 

C. NSP 

D. ISP 

E. ASP 

Answer: C 

Q5. Refer to the two show output examples below. The switch with the e8ba.70b5.7180 MAC address is the root bridge for which VLAN or VLANs? 

S78#show spanning-tree 

MST0 

Spanning tree enabled protocol mstp 

Root ID Priority 32768 

Address e8ba.70b5.6c00 

Cost 0 

Port 23 (FastEthernet0/21) 

Hello Time 2 sec Max Age 20 sec  Forward Delay 15 sec 

Bridge ID Priority 32768  (priority 32768 sys-id-ext 0) Address e8ba.70e1.d980 

Hello Time 2 sec Max Age 20 sec  Forward Delay 15 sec Interface Role Sts Cost  Prio.Nbr Type 

Fa0/1 Desg FWD 200000  128.3 P2p Fa0/2 Desg FWD 200000  128.4 P2p Fa0/21 Root FWD 200000  128.23 P2p Fa0/23 Altn BLK 200000  128.25 P2p MST1 

Spanning tree enabled protocol mstp 

Root ID Priority 24577 

Address e8ba.70b5.6c00 

Cost 200000 

Port 23 (FastEthernet0/21) 

Hello Time 2 sec Max Age 20 sec  Forward Delay 15 sec 

Bridge ID Priority 32769  (priority 32768 sys-id-ext 1) 

Address e8ba.70e1.d980 

Hello Time 2 sec Max Age 20 sec  Forward Delay 15 sec Interface Role Sts Cost  Prio.Nbr Type 

Fa0/1 Desg FWD 200000  128.3 P2p Fa0/21 Root FWD 200000  128.23 P2p Fa0/23 Altn BLK 200000  128.25 P2p MST2 

Spanning tree enabled protocol mstp 

Root ID Priority 24578 

Address e8ba.70b5.7180 

Cost 200000 Port 25 (FastEthernet0/23) Hello Time 2 sec Max Age 20 sec  Forward Delay 15 sec Bridge ID Priority 32770  (priority 32768 sys-id-ext 2) Address e8ba.70e1.d980 Hello Time 2 sec Max Age 20 sec  Forward Delay 15 sec 

Interface Role Sts Cost  Prio.Nbr Type 

Fa0/2 Desg FWD 200000  128.4 P2p Fa0/21 Altn BLK 200000  128.23 P2p Fa0/23 Root FWD 200000  128.25 P2p S78# show spanning-tree mst ##### MST0 vlans mapped:  1-69,71-79,81-4094 Bridge address e8ba.70e1.d980  priority  32768 (32768 sysid 0) Root address e8ba.70b5.6c00 priority  32768 (32768 sysid 0) port Fa0/21 path cost 0 Regional Root address e8ba.70b5.6c00  priority 32768 (32768 sysid 0) 

internal cost 200000 rem hops 19 Operational hello time 2, forward delay 15, max age 20, txholdcount 6 Configured hello time 2, forward delay 15, max age 20, max hops  20 Interface Role Sts Cost  Prio.Nbr Type 

Fa0/1 Desg FWD 200000  128.3 P2p Fa0/2 Desg FWD 200000  128.4 P2p Fa0/21 Root FWD 200000  128.23 P2p Fa0/23 Altn BLK 200000  128.25 P2p ##### MST1 vlans mapped:  70 

Bridge address e8ba.70e1.d980  priority  32769 (32768 sysid 1) 

Root address e8ba.70b5.6c00 priority  24577 (24576 sysid 1) 

port Fa0/21 cost 200000  rem hops 19 

Interface Role Sts Cost  Prio.Nbr Type 

Fa0/1 Desg FWD 200000  128.3 P2p Fa0/21 Root FWD 200000  128.23 P2p Fa0/23 Altn BLK 200000  128.25 P2p ##### MST2 vlans mapped:  80 Bridge address e8ba.70e1.d980  priority  32770 (32768 sysid 2) Root address e8ba.70b5.7180 priority  24578 (24576 sysid 2) port Fa0/23 cost 200000  rem hops 19 Interface Role Sts Cost  Prio.Nbr Type 

Fa0/2 Desg FWD 200000  128.4 P2p Fa0/21 Altn BLK 200000  128.23 P2p Fa0/23 Root FWD 200000  128.25 P2p 

A. VLAN 1 

B. VLAN 70 

C. VLAN 80 

D. VLANs 1, 70, and 80 

E. VLANs 1 and 70 

F. VLANs 1 and 80 

G. VLANs 70 and 80 

Answer: C 

Q6. On Cisco IOS XR software, what are the four valid address-family configuration command options in static route configuration mode? (Choose four.) 

A. address-family ipv4 unicast 

B. address-family ipv6 unicast 

C. address-family ipv4 multicast 

D. address-family ipv6 multicast 

E. address-family vpnv4 

F. address-family vpnv6 

Answer: A,B,C,D 

Q7. You have just enabled IS-IS on the lab testing network. You notice that IS-IS is not using the optimal path selection based on the interface bandwidth. Currently, the IS-IS routing process seems to be selecting the best path based on the hop count. 

What configuration change can you make to cause IS-IS to select the optimal path based on the interface bandwidth? 

A. Enable a wide-style IS-IS metric. 

B. Enable a narrow-style IS-IS metric. 

C. Change the default auto-cost reference bandwidth to a higher value. 

D. Change the default IS-IS metric on each of the router interfaces to better correspond to the interface bandwidth. 

E. Change the interface bandwidth by using the bandwidth interface configuration mode command. 

Answer: D 

Q8. Your switch network has been configured to support multiple VLANs. In order for the users on one VLAN to communicate with users on another VLAN, which additional configuration is required? 

A. Enable a routing protocol like EIGRP on a router or on a Layer 3 capable switch. 

B. Enable inter-VLAN routing on a router or on a Layer 3 capable switch. 

C. Enable a switch virtual interface on the router, using the interface vlan global configuration command. 

D. Enable a switch virtual interface on the switch, using the encapsulation dot1q 

E. subinterface configuration command 

F. Enable IP routing on a Layer 2 switch. 

Answer: B 

Q9. Which three statements about OSPFv2 or OSPFv3 authentication are true? (Choose three.) 

A. On Cisco IOS XR platforms, OSPFv3 authentication can be configured at the OSPF routing process, area, or interface level. 

B. OSPF authentication on Cisco IOS and IOS XE platforms can be configured per area or per interface. 

C. On Cisco IOS and IOS XE and IOS XR platforms, the authentication key can only be configured per interface. 

D. OSPFv3 uses IPsec for authentication and encryption. 

E. On Cisco IOS XR platforms, the OSPF authentication that is configured for the area overrides the authentication that is configured for the interface. 

F. On Cisco IOS and IOS XE platforms, the two OSPFv2 authentication methods that are supported are MD5 and SHA1. 

Answer: A,B,D 

Q10. On Cisco IOS XR software, what is the default commit option? 

A. best-effort 

B. psuedo-atomic 

C. replace 

D. force 

Answer: B 

Refer to the show command exhibit. 

***Exhibit is Missing*** 

Which statement is true? 

A. It shows the result of the target configuration merged with the running configuration. 

B. It shows the contents of the uncommitted configuration. 

C. It shows the contents of the failed configuration. 

D. It shows the contents of the running configuration.