Act now and download your Cisco 642-997 test today! Do not waste time for the worthless Cisco 642-997 tutorials. Download Improved Cisco Implementing Cisco Data Center Unified Fabric (DCUFI) v5.0 exam with real questions and answers and begin to learn Cisco 642-997 with a classic professional.
2026 New 642-997 Exam Dumps with PDF and VCE Free: https://www.surepassexam.com/642-997-exam-dumps.html
Q1.
FabricPath switch-id is 25 and load-balance is configured for L3/L4 and rotate amount is 14 byte. What information is true about FabricPath switch-id?
A. FabricPath topology requires manual configuration of switch-id which has a range from 1 to 4095
B. Every FabricPath must have a manually configured switch-id for it to form a FabricPath topology
C. FabricPath topology requires manual configuration of switch-id which has a range from 1 to 4099
D. You do not have to manually assign a switch ID unless you are running a virtual port channel plus (vPC*) because the system assigns a switch ID for you when you enable FabricPath
Answer: B
Q2. Which statement about core-edge SAN topology is true?
A. Converged FCoE links connect the core and edge MDS switches.
B. The SAN core connects to the network aggregation layer.
C. Separate links with the same I/O are used for SAN and LAN traffic.
D. Storage devices are accessed via FCoE over the LAN network.
Answer: B
Q3. Which of the following Cisco Nexus features is best managed with DCNM-LAN?
A. VSS
B. Domain parameters
C. Virtual switches
D. AAA
Answer: C
Q4.
What is the status of FCoE license on Cisco Nexus 5548 switch?
A. FCoE license is not installed
B. FCoE license is installed, but it is expired
C. FCoE license is installed and status is enabled
D. FCoE license does not need to be installed because it is part of ENTERPRISE_PKG
Answer: A
Q5. Which statement is true if password-strength checking is enabled?
A. Short, easy-to-decipher passwords will be rejected.
B. The strength of existing passwords will be checked.
C. Special characters, such as the dollar sign ($) or the percent sign (%), will not be allowed.
D. Passwords become case-sensitive.
Answer: A
15. Which statement about RBAC user roles on a Cisco Nexus switch is true?
A. If you belong to multiple roles, you can execute only the commands that are permitted by both roles (logical AND).
B. Access to a command takes priority over being denied access to a command.
C. The predefined roles can only be changed by the network administrator (superuser).
D. The default SAN administrator role restricts configuration to Fibre Channel interfaces.
E. On a Cisco Nexus 7000 Series Switch, roles are shared between VDCs.
Q6. Which three selections represent implementations of Cisco VN-Link technology? (Choose three.)
A. Cisco Nexus 1000V
B. Cisco Nexus 2000 FEX
C. Cisco VM-FEX
D. VMware PTS
E. vMotion
Answer: ACD
Q7. Which statement about electronic programmable logic device image upgrades is true?
A. EPLD and ISSU image upgrades are nondisruptive.
B. An EPLD upgrade must be performed during an ISSU system or kickstart upgrade.
C. Whether the module being upgraded is online or offline, only the EPLD images that have different current and new versions are upgraded.
D. You can execute an upgrade or downgrade only from the active supervisor module.
Answer: D
Q8. Refer to the exhibit.
Which statement based on these two outputs that were collected 24 hours apart is true?
A. The Site 2 OTV edge device has gone down.
B. The MAC address cannot be discovered on two separate port channel interfaces.
C. The MAC address that ends in 020a moved to the local site 23 hours ago.
D. The Overlay1 IP address should be a multicast IP address.
Answer: C
Q9. In policy-based routing, which action is taken for packets that do not match any of the route-map statements?
A. forwarded after the egress queue empties on the outbound interface
B. forwarded using the last statement in the route map
C. forwarded using the closest matching route-map statement
D. forwarded using destination-based routing
Answer: D
Q10. Which command enables NPIV on Cisco Nexus 5000 Series Switches and Cisco MDS switches?
A. switch(config)# npiv enable
B. switch(config)# npivon
C. switch(config)# feature npiv
D. switch(config)# npiv proxy
E. switch(config)# np proxy-enable
Answer: C