Microsoft 70-740 Braindumps 2021

NEW QUESTION 1
You have a server that runs Windows Server 2021.
The server contains a storage pool named Pool! Pool1 contains five physical disks named Disk1, Disk2, Disk3, Disk4, and Disk5.
A virtual disk named VirtualDisk1 is stored in pool1. VirtualDisk1 uses the panty storage layout Disk3 fails.
You need to remove Disk3 from Pool1.
Which two commands should you run? Each correct answer presents part of the solution.

• A. Update-StoragePool –FriendlyName Pool1
• B. Set-ResiliencySetting –StoragePool Pool1 –PhysicalDiskRedundancyDefault 4
• C. Reset-PhysicalDisk –FriendlyName Disk3
• D. Set-PhysicalDisk –FriendlyName Disk3 –Usage Retired
• E. Remove-PhysicalDisk –FriendlyName Disk3

Answer: BE

NEW QUESTION 2
Note This question is part of a series of questions that use the same scenario. For your convenience,
the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Start of Repeated Scenario:
Your network contains an Active Directory domain named contoso.com The functional level of the forest and the domain is Windows Server 2008 R2 All servers in the domain run Windows Server 2021 Standard. The domain contains 300 client computers that run either Windows 8.1 or Windows 10.
The domain contains nine servers that are configured as shown in the following table.

The virtual machines are configured as follows:
• E ach virtual machine has one virtual network adapter
• VM1 and VM2 are part of a Network Load Balancing (NIB) cluster.
• All of the servers on the network can communicate with all of the virtual machines. End of repeated Scenario.
You need to minimize the likelihood that a virtual machine running malicious code will consume excessive resources on Server5.
What should you do?

• A. Configure the virtual machines as shielded virtual machines.
• B. Run the Set-VMProcessor cmdlet and specify the –EnableHostResourceProtection Parameter.
• C. Run the Set-VMProcessor cmdlet and specify the –MaximumCountPerNumaNode Parameter.
• D. Configure VM Network Adapter Isolation.

Answer: B

NEW QUESTION 3
Note: This question is part of a series of questions that present the same scenario. Each question in
the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have two servers that run Windows Server 2021.
You plan to create a Network Load Balancing (NLB) cluster that will contain both servers. You need to configure the network cards on the servers for the planned NLB configuration.
Solution: You configure the network cards to be on the same subnet and to have static IP addresses. You configure the cluster to use multicast.
Does this meet the goal?

• A. Yes
• B. No

Answer: A

Explanation:
References:
https://technet.microsoft.com/en-us/windows-server-docs/networking/technologies/network-load- balancing

NEW QUESTION 4
You have Hyper-V virtual machines that run 50 web servers, 10 Microsoft SQL Server servers. 10 file servers, and eight domain controllers.
You need to implement a backup strategy that meets the following requirements:
*Backs up all servers
*Centralizes backup management
*Performs application-level backups
*Provides the ability to perform bare metal recovery What should you use?

• A. Microsoft Azure VM Backup
• B. Microsoft Azure Backup Agent
• C. Windows Server Backup
• D. Microsoft Azure Backup Server

Answer: D

NEW QUESTION 5
Note: This question is part of a series of questions that present the same scenario. Each question in
the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have two servers that run Windows Server 2021.
You plan to create a Network load Balancing (NLB) cluster that will contain both servers. You need to configure the network cards on the servers for the planned NLB configuration.
Solution: You configure the network cards to be on the same subnet and to have dynamic IP addresses. You configure the cluster to use multicast.
Does this meet the goal?

• A. Yes
• B. No

Answer: B

Explanation:
References:
https://technet.microsoft.com/en-us/windows-server-docs/networking/technologies/network-load- balancing

NEW QUESTION 6
Note: This question is part of a series of questions that use the same similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have a Hyper-V host named Server1 that runs Windows Server 2021. Server1 contains a virtual machine named VM1.
You need to ensure that you can use nested virtualization on VM1. What should you run on Server1?

• A. the Mount-VHD cmdlet
• B. the Diskpart command
• C. the Set-VHD cmdlet
• D. the Set-VM cmdlet
• E. the Set-VMHost cmdlet
• F. the Set-VMProcessor cmdlet
• G. the Install-WindowsFeature cmdlet
• H. the Optimize-VHD cmdlet

Answer: F

NEW QUESTION 7
Your network contains an Active Directory domain.
The domain contains two Hyper-V hosts.
You plan to perform live migrations between the hosts.
You need to ensure that the live migration traffic is authenticated by using Kerberos. What should you do first?

• A. From Server Manager, install the Host Guardian Service server role on a domain controller.
• B. From Active Directory Users and Computers, add the computer accounts for both servers to the Cryptographic Operators group.
• C. From Active Directory Users and Computers, modify the Delegation properties of the computer accounts for both servers.
• D. From Server Manager, install the Host Guardian Service server role on both servers.

Answer: C

Explanation: If you have decided to use Kerberos to authenticate live migration traffic, configure constrained delegation before you proceed to the rest of the steps.

NEW QUESTION 8
HOTSPOT
You have a server named Server1 that runs Windows Server 2021. Server1 is a Hyper-V host. You run the commands shown in the following graphic:

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.

Answer:

Explanation:

NEW QUESTION 9
You deploy two servers that run Windows Server 2021. You install the Failover Clustering feature on both servers. You need to create a workgroup cluster.
What should you do?

• A. Configure both of the server to be in a workgroup named Workgrou
• B. Configure the Cluster Service to log on as Network Servic
• C. Run the New-Cluster cmdlet and specify an administrative access point of None.
• D. Create matching local administrative accounts on both of the server
• E. Assign the same primary DNS suffix to both of the server
• F. Run the New-Cluster cmdlet and specify an administrative access point of DNS.
• G. Configure both of the server to be in a workgroup named Workgrou
• H. Configure the Cluster Service to log on as Network Servic
• I. Run the New-Cluster cmdlet and specify an administrative access point of DNS.
• J. Create matching local administrative accounts on both of the server
• K. Assign the same primary DNS suffix to both of the server
• L. Run the New-Cluster cmdlet and specify an administrative access point of None

Answer: B

Explanation: References:
https://rlevchenko.com/2015/09/07/workgroup-and-multi-domain-clusters-in-windows-server- 2021/

NEW QUESTION 10
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After your answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory forest named contoso.com. You need to identify which server is the schema master.
Solution: From Windows PowerShell, you run Get-ADDomainController -Discover -Service 2. Does this meet the goal?

• A. Yes
• B. No

Answer: B

Explanation: References:
https://blogs.technet.microsoft.com/mempson/2007/11/08/how-to-find-out-who-has-your-fsmo- roles/

NEW QUESTION 11
DRAG DROP
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2021.
You install IP Address Management (IPAM) on Server1.
You need to manually start discovery of the servers that IPAM can manage in contoso.com.
Which three cmdlets should you run in sequence? To answer, move the appropriate cmdlets from the list of cmdlets to the answer area and arrange them in the correct order.

Answer:

Explanation:
https://technet.microsoft.com/itpro/powershell/windows/ipam/add-ipamdiscoverydomain https://technet.microsoft.com/itpro/powershell/windows/ipam/add-ipamserverinventory https://technet.microsoft.com/itpro/powershell/windows/ipam/invoke-ipamserverprovisioning

NEW QUESTION 12
You have two Hyper-V hosts named Server1 and Server2 that run Windows Server 2021. Server1
hosts a virtual machine named VM1 that is in a Running state.
On Server1, you export VM1 and then you import VM1 on Server2. What is the current state of VM1 on Server2?

• A. Off
• B. Running
• C. Paused
• D. Saved

Answer: B

NEW QUESTION 13
HOTSPOT
You have a server named Server1 that runs Windows Server 2021 server.
Server1 has the Docker daemon configured and has a container named Container1.
You need to mount the folder C:Folder1 on Server1 to C:ContainerFolder in Container1.
Which command should you run? To answer, select the appropriate options in the answer area.

Answer:

Explanation:

NEW QUESTION 14
You plan to install a Nano Server on a physical server named Nano1. Nano1 will host several virtual machines that will use live migration.
Which package should you install on Nano1?

• A. Microsoft-NanoServer-SecureStartup-Package
• B. Microsoft-NanoServer-ShieldedVM-Package
• C. Microsoft-NanoServer-Compute-Package
• D. Microsoft-NanoServer-FailoverCluster-Package
• E. Microsoft-NanoServer-Storage –Package

Answer: C

NEW QUESTION 15
You have a server named Server1 that runs Windows Server 2021. Server1 is a Hyper-V host that hosts a virtual machine named VM1.
Server1 has three network adapter cards that are connected to virtual switches named vSwitch1,
vSwitch2 and vSwitch3.
You configure NIC Teaming on VM1 as shown in the exhibit. (Click the Exhibit button.)

You need to ensure that VM1 will retain access to the network if a physical network adapter card fails on Server1.
What should you do?

• A. From Windows PowerShell on VM1, run the Set-VmNetworkAdapterTeamMapping cmdlet.
• B. From Hyper-V Manager on Server1, modify the settings on VM1.
• C. From Windows PowerShell on Server1, run the Set-VmNetworkAdapterFailoverConfiguration cmdlet.
• D. From the properties of the NIC team on VM1, add the adapter named Ethernet to the NIC team.

Answer: D

Explanation: https://technet.microsoft.com/en-us/windows-server-docs/networking/technologies/nic-teaming/nic-teaming

NEW QUESTION 16
You have two servers named Server1 and Server2 that run Windows Server 2021.
You plan to implement Storage Replica to replicate the contents of volumes on Server1 to Server2. You need to ensure that the replication traffic between the servers is limited to a maximum of 100 Mbps.
Which cmdlet should you run?

• A. New-NetQosPolicy
• B. Set-NetworkController
• C. New-NetTransportFilter
• D. New-StorageQosPolicy

Answer: A

Explanation:
References: https://technet.microsoft.com/en-us/library/hh967471(v=wps.630).aspx

NEW QUESTION 17
HOTSPOT
You have a server named Server1 that runs Windows Server 2021 and has the Hyper-V server role installed You open Disk Management on Server1 as shown in the following graphic

You plan to configure Disk13 as a pass-through disk for a generation 1 virtual machine
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic

Answer:

Explanation:

NEW QUESTION 18
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You network contains an Active Directory domain named contoso.com.
You need to create a Nano Server image named Nano1 that will be used as a virtualization host. The Windows Server 2021 source files are located in drive D.
Solution: You run the following cmdlet.

Does this meet the goal?

• A. Yes
• B. No

Answer: A

NEW QUESTION 19
DRAG DROP
You have a file server named Server1 that runs Windows Server 2021.
You need to create a report that lists all of the share permissions assigned to the security principals on Server1.
How should you complete the command? To answer, drag the appropriate cmdlets to the correct targets. Each cmdlet may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

Answer:

Explanation: