Tested 70-740 Dumps 2021

NEW QUESTION 1
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a server named Server 1 that runs Windows Server 2021.
You plan to use Windows Server Backup to back up all of the data on Server l. You create a new volume on Server 1.
You need to ensure that the new volume can be used as a backup target. The backup target must support incremental backups.
Solution: You assign a drive letter to the volume, and you format the volume by using ex FAT. Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 2
Note: This question is part of a series of questions that use the same similar answer choices An answer choice may be correct for more than one question in the series Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question
You have two servers named Server1 and Server2 that run Windows Server 2021 Server1 and Server2 have the Hyper-V server role installed
An iSCSI SAN connects to the network
You create a LUN on the SAN and configure both servers to connect to the iSCSI target
You create a failover cluster and add Server1 and Server2 to the cluster. You connect both servers to the iSCSI target and format the shared storage
You need to add the shared storage to the cluster The solution must ensure that virtual machines running on both nodes can access the shared storage
simultaneously.
Which tool should you use?

• A. the clussvc.exe command
• B. the cluster.exe command
• C. the Computer Management console
• D. the configurehyperv.exe command
• E. the Disk Management console
• F. the Failover Cluster Manager console
• G. the Hyper-V Manager console
• H. the Server Manager Desktop app

Answer: F

NEW QUESTION 3
You have a server named Server1 that runs Windows Server 2021.
On Server1, you use the Basic template to create a new Data Collector Set named CollectorSet1. You need to configure CollectorSet1 to generate performance alerts.
What should you do before you start CollectorSet1?

• A. Modify the performance counter data collector of CollectorSet1.
• B. Add a new data collector to CollectorSet1.
• C. Modify the configuration data collector of CollectorSet1.
• D. Add a new task to CollectorSet1.

Answer: A

Explanation:
https://technet.microsoft.com/en-us/library/cc722414(v=ws.11).aspx

NEW QUESTION 4
You have a server named Server1 that runs Windows Server 2021. Server1 is a member of contoso.com. Server1 has the Hyper-V role installed. Virtual machines on Server1 are connected to an external switch named Switch1.
You create a virtual machine named VM1 on Server1 by running the following cmdlets.

You need to ensure that you can install the operating system on VM1 by using Windows Deployment Services.
What should you do?

• A. Modify the SwitchType parameter of Switch1.
• B. Modify the DefaultFlowMinimumBandwidthWeight parameter of Switch1.
• C. Add a SCSI controller to VM1.
• D. Add a legacy network adapter to VM1.

Answer: D

NEW QUESTION 5
HOTSPOT
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2021.
Server1 has Microsoft System Center 2021 Virtual Machine Manager (VMM) installed. Server2 has IP Address Management (IPAM) installed.
You create a domain user named User1.
You need to integrate IPAM and VMM. VMM must use the account of User1 to manage IPAM. The solution must use the principle of least privilege.
What should you do on each server? To answer, select the appropriate options in the answer area.

Answer:

Explanation:
On Server1: Create a Run As Account that uses User1.
On Server2: Add User1 to IPAM ASM Administrator Role. https://technet.microsoft.com/en-us/library/dn783349(v=ws.11).aspx https://technet.microsoft.com/en-us/library/jj878348(v=ws.11).aspx

NEW QUESTION 6
Your IT company is constantly changing, with new users coming and going throughout the year.
One of your common tasks requires the deletion of user accounts for employees who have left the company.
Which command can be used to delete user accounts?

• A. LDIFDE
• B. Dsmod
• C. Dspromo
• D. Netsh

Answer: A

NEW QUESTION 7
HOTSPOT
You have a server named Served that runs Windows Server 2021. Server1 has the Windows Application Proxy role service installed. You are publishing an application named App1 that will use Integrated Windows authentication as shown in the following graphic.

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic

Answer:

Explanation:

NEW QUESTION 8
DRAG DROP
You install a new Nano Server named Nano1. Nano1 is a member of a workgroup and has an IP address of 192 1698 1.10.
You have a server named Server1 that runs Windows Server 2021.
From Server1, you need to establish a Windows PowerShell session to Nano1.
How should you complete the PowerShell script? To answer, drag the appropriate cmdlets to the correct targets Each cmdlet may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

Answer:

Explanation:

NEW QUESTION 9
You have a server named Server1 that runs Windows Server 2021.
The disks on Server1 are configured as shown in the following table.

Windows Server 2021 is installed in C:Windows.
On which two volumes can you enable data deduplication? Each correct answer presents a complete solution.

• A. C:
• B. D:
• C. E:
• D. F:
• E. G:

Answer: CE

NEW QUESTION 10
Note: This question is part of a series of questions that use the same similar answer choices. An
answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have an Active Directory domain that contains two Hyper-V servers named Server1 and Server2. Server1 has Windows Server 2021 installed. Server2 has Windows Server 2012 R2 installed.
Each Hyper-V server has three network cards. Each network card is connected to a different subnet. Server1 contains a dedicated migration network.
Server2 contains a virtual machine named VM5.
You plan to perform a live migration of VM5 to Server1.
You need to ensure that Server1 uses all available networks to perform the live migration of VM5. What should you run1?

• A. the Mount-VHD cmdlet
• B. the Diskpart command
• C. the Set-VHD cmdlet
• D. the Set-VM cmdlet
• E. the Set-VMHost cmdlet
• F. the Set-VMProcessor cmdlet
• G. the Install-WindowsFeature cmdlet
• H. the Optimize-VHD cmdlet

Answer: E

NEW QUESTION 11
DRAG DROP
You have a Hyper-V host named Server1 that runs Windows Server 2021. Server1 hosts a virtual machine named VM1. VM1 runs Windows Server 2021. VM1 uses a VHD for storage.
The disk configuration of VM1 is shown in the exhibit. (Click the Exhibit button.)

You need to increase the size of volume D to 400 GB.
Which cmdlets should you run on Server1 and VM1? To answer, drag the appropriate cmdlets to the correct servers. Each cmdlet may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

NEW QUESTION 12
You have a Nano Server named Nano1.
You deploy several containers to Nano1 that use an image named Image1. You need to deploy a new container to Nano1 that uses Image1.
What should you run?

• A. the Install-NanoServerPackage cmdlet
• B. theInstall-WindowsFeaturecmdlet
• C. the docker load command
• D. the docker run command

Answer: D

NEW QUESTION 13
HOTSPOT
You have a Hyper-V host that runs Windows Server 2021 The Hyper-V host has a virtual machine named VM1
You have a VHD named VHD1 vhdx that has a generalized image of Windows Server 2021. You plan to create multiple virtual machines that will use the generalized image
You need to create differencing disks based on VHD1 vhdx
What command should you run? To answer, select the appropriate options in the answer area

Answer:

Explanation:

NEW QUESTION 14
Your network contains an Active Directory domain. The domain contains a new file server named Server1 that runs a Server Core installation of Windows Server 2021.
Server1 has an ReFS-formatted volume D: and NTFS-formatted volume E: The volumes do not contain any data.
You install the Data Deduplication role service on Server1.
You need to implement Data Deduplication for volumes on D: and E:.
Solution: From Windows PowerShell, you run Enable-DeDupVolume -Volume D:,E:. Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 15
You have a Hyper-V host named Server1 that runs Windows Server 2021. The host has two virtual machines (VMs) named VM1 and VM2.
On the Hyper-V host, you create two virtual disks named Disk1 and Disk2. You plan to create a test environment for Storage Spaces Direct.
You need to configure the VMs to connect to the virtual disks. What should you use?

• A. An iSCSI target
• B. A virtual SCSI controller
• C. A virtual fibre channel adapter
• D. A virtual IDE controller

Answer: B

Explanation: References:
https://blogs.msdn.microsoft.com/clustering/2015/05/27/testing-storage-spaces-direct-using-windows-server-2021-virtual-machines/

NEW QUESTION 16
HOTSPOT
You deploy a new Hyper-V host named Server1 that runs Windows Server 2021. You implement receive side scaling (RSS) on Server1.
The chipset on Server1 does not support NetDMA.
All of the equipment on your network supports 10-Gbps connectivity. On Server1, you deploy a virtual machine named VM1.
You configure VM1 to aggregate all of the Windows and non-Windows log files for all of the servers on the network.
VM1 has four virtual processors.
You discover that VM1 drops packets.
Which two options should you run? To answer, select the appropriate options in the answer area.

Answer:

Explanation:

NEW QUESTION 17
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2021. Server1 and Server2 have multiple local disks attached.
You need to create a storage pool by using Storage Spaces Direct.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Answer:

Explanation: References:
https://docs.microsoft.com/en-us/windows-server/storage/storage-spaces/deploy-storage-spaces-direct

NEW QUESTION 18
You have four servers named Server1, Server2, Server3, and Server4 that run Windows Server 2021. Each server has a single 4-TB SATA hard disk.
To each server you attach a new 4-TB SATA hard disk.
You need to create a new storage cluster that uses Storage Spaces Direct. The storage pool must contain all of the new disks.
Which command should you run before you enable Storage Space Direct?

• A. Add-ClusterSharedVolume –Name “Disk 1” –Cluster Cluster1
• B. New-Cluster –Name Cluster1 –Node ‘Server1’, ‘Server2’, ‘Server3’, ‘Server4’ -NoStorage
• C. Get-ClusterAvailableDisk –Cluster Cluster1 | Add-ClusterDisk
• D. New-ClusterStorageEnclosure –id 1 –name Cluster1 –type jbod –ConnectionString “Server1,Server2,Server3,Server4”

Answer: B

NEW QUESTION 19
HOTSPOT
You have a server named Server1 that runs Windows Server 2021.
On Server1, you plan to create a new volume named Volume1. Volume1 will contain image files.
You need to identify which file system and which cluster size to configure for Volume1. The solution must ensure that the image files will be compressed by using file system compression.
Which file system and cluster size should you identify? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation: