Accurate 70-740 Dumps Questions 2021

NEW QUESTION 1
Your network contains an Active Directory domain named contoso com. The domain contains two servers named Server1 and Server2 that have the same hardware configuration
You need to asynchronously replicate volume F: from Server1 to Server2. What should you do?

• A. RunNew-SRPartnershipand specify the -RephcationModeparameter.
• B. install the Failover Clustering feature and create a new cluster resource group.
• C. Install the Failover Clustering feature and use Cluster Shared Volumes (CSV).
• D. RunSet-DfsrServiceConfigurationand specify the -RPCPortparameter

Answer: A

NEW QUESTION 2
With Nano Server some packages are installed directly with their own Windows PowerShell switches (such as -Compute); others you install by passing package names to the -Packages parameter, which you can combine in a comma-separated list.
You want to add IIS to your Nano Server, which command should you use?

• A. -Compute
• B. -Packages
• C. -Containers
• D. -Storage

Answer: B

Explanation: IIS is added by using -Packages Microsoft-NanoServer-IIS-Package.

NEW QUESTION 3
You have a server named Server1 that runs Windows Server 2021. The Docker daemon runs on Server1.
You need to ensure that members of a security group named Docker Administrators can administer Docker.
What should you do?

• A. Run the sc privsc ommand.
• B. Edit the Daemon.json file.
• C. Add Docker Administrators to the local Administrators group.
• D. Edit the Configuration.json file.

Answer: C

NEW QUESTION 4
You have a server named Server1 that runs Windows Server 2021. The Docker daemon run on
Server1.
You need to ensure that members of a security group named Docker Administrators administer Docker.
What should you do?

• A. Run the Set-Service cmdlet.
• B. Run the sc config command.
• C. Modify the Security settings of Docker
• D. Modify the Security settings of Docker.exe.

Answer: B

Explanation: https://docs.microsoft.com/en-us/virtualization/windowscontainers/manage-docker/configure-docker-daemon

NEW QUESTION 5
You have a Hyper-V host named Server1 that runs Windows Server 2021. Server1 has ab external virtual switch named Switch1. Server1 hosts a virtual machine named VM1 that runs Windows Server 2021. VM1 has one network adapter. The network adapter connects to Switch1.
You need to limit the maximum network bandwidth available to VM1 to 100 Mbps. The solution must limit the bandwidth for VM1 only.
Which cmdlet should you run?

• A. Set-NetAdapter
• B. Set-VMNetworkAdapter
• C. Set-VM
• D. Set-NetAdapterVmq
• E. Set-NetworkSwitchPortProperty

Answer: B

Explanation: The Set-VMNetworkAdapterVlan cmdlet configures virtual LAN settings for the traffic through a virtual network adapter.

NEW QUESTION 6
HOTSPOT
You have a Hyper-V host named Server1 that runs Windows Server 2021.
You deploy a virtual machine named VM1 to Server1. VM1 runs Windows Server 2021. You need to ensure that you can install the Hyper-V server role on VM1.
Which command should you run? To answer, select the appropriate options in the answer area.

Answer:

Explanation:
References:
https://docs.microsoft.com/en-us/virtualization/hyper-v-on-windows/user-guide/nested- virtualization

NEW QUESTION 7
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a server named Server1 that runs Windows Server 2021.
Server1 hosts a line-of-business application named App1. App1 has a memory leak that occasionally causes the application to consume an excessive amount of memory.
You need to log an event in the Application event log whenever App1 consumes more than 4 GB of memory.
Solution: You create an event trace data collector. Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 8
In this section, you'll see one or more sets of questions with the same scenario and problem Each
question presents a unique solution to the problem, and you must determine whether the solution meets the stated goals. Any of the solutions might solve the problem. It is also possible that none of the solutions solve the problem.
Once you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. All client computers run Windows 10.
On Server1, you have the following zone configuration

You need to prevent Server1 from resolving queries from DNS clients located on Subnet4 Server1
must resolve queries from all other DNS clients
Solution From Windows PowerShell on Setver1, you run the Add-DnsServerTrustAnchor cmdtel Does this meet the goal?

• A. Yes
• B. No

Answer: A

NEW QUESTION 9
In this section, you'll see one or more sets of questions with the same scenario and problem Each
question presents a unique solution to the problem, and you must determine whether the solution meets the stated goals. Any of the solutions might solve the problem. It is also possible that none of the solutions solve the problem.
Once you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. All client computers run Windows 10.
On Server1, you have the following zone configuration

You need to prevent Server1 from resolving queries from DNS clients located on Subnet4 Server1
must resolve queries from all other DNS clients
Solution From Windows Firewall with Advanced Security on Server1, you create an inbound rule Does this meet the goal?

• A. Yes
• B. No

Answer: A

NEW QUESTION 10
Your network contains three Hyper-V hosts. You add all of the hosts to a cluster.
You need to create highly available storage spaces that connect to directly attached storage on the hosts.
Which cmdlet should you use?

• A. Enable-CluslerStorageSpacesDircct
• B. Update-CluslerVirtualMachineConfiguration
• C. Add-CluslerDisk
• D. Set-Storage Pool

Answer: A

NEW QUESTION 11
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a server named Server1 that runs Windows Server 2021. Server1 has the Hyper-V server role and Docker installed.
You pull the Microsoft/iis Docker image to Server1.
You need to view the available space in the Microsoft/iis Docker image. Solution: You run the command docker run –d Microsoft/iis.
You open Disk Management on Server1. Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 12
You have a Windows Server 2021 failover cluster 1 that contains four nodes named Server1, Server2, Server3, Server4, Cluster1 hosts 40 virtual machines that are distributed evenly across the nodes. Server1 and Server2 are located in a data center in Madrid. Server3 and Server4 are located in a data center in Barcelona.
You need to ensure that when you pause a node in the other data center.
Which two actions should you perform? Each correct answer present part of the solution.

• A. Run the New-Cluster Fault Domain cmdlet.
• B. Run the Add-Cluster Group cmdlet.
• C. Configure a file share witness for each data center.
• D. Run the Set-Cluster Fault Domain cmdlet.
• E. Create an Active Directory site for each data center.
• F. Change the quorum configuration of the cluster to Node Majority.

Answer: BD

NEW QUESTION 13
You have a Scale-Out File Server that has a share named Share 1. Sharel contains a virtual disk trie named Diskl.vhd.
You plan to create a guest failovcr cluster.
You need to ensure thai you can use the virtual disk as a shared virtual disk for the guest failove*
Cluster.
Which cmdlet should you use?

• A. Oplimize-VHD
• B. Convert-VHD
• C. Set-VHO
• D. Optimtze-VHDSet

Answer: A

NEW QUESTION 14
NOTE: This Question is a part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have a Hyper –V host named server 1 that runs Windows Server 2021 and a two-node scale-out file server cluster named Cluster1.
You need to migrate the storage on VM1 to Cluster1. Which tool should you use?

• A. the clussvc.exe command
• B. the Cluster.exe command
• C. the Computer Management snap-in
• D. the configure hyperv.exe command
• E. the Disk Management snap-in
• F. the Failover Cluster Manager snap-in
• G. the Hyper-V Manager snap-in
• H. the Server Manger app

Answer: G

NEW QUESTION 15
You have a server named Server 1 that runs Windows Server 2021 Window, Defender is enabled on Server1.
Server1 runs an application named App that stores various types of files in Microsoft OneDrive for Business, Microsoft OneDrive, and Microsoft SharePoint Online. Appt also Interacts with several local services,
You need to prevent Windows Defender from scanning any files opened by Appl. Should you do on Server1?

• A. Run the Set-ExecutionPolicy cmdlet
• B. Form the Windows Defender settings, configure a file exclusion.
• C. From the Windows Defender settings, configure a process exclusion.
• D. Modify the cloud-based protection settings in Windows Defender.

Answer: B

Explanation: References:
https://www.windowscentral.com/how-exclude-files-and-folders-windows-defender-antivirus-scans

NEW QUESTION 16
DRAG DROP
You have a server named Server1 that runs Windows Server 2021.
You need to deploy the first node cluster of a Network Controller cluster
Which four cmdlets should you run in sequence? To answer, move the appropriate cmdlets from the list of cmdlets to the answer area and arrange them in the correct order

Answer:

Explanation:

NEW QUESTION 17
Your company has 10 offices. Each office has a local network that contains several Hyper-V hosts that run Windows Server 2021. All of the offices are connected by high speed, low latency WAN links.
You need to ensure that you can use QoS policies for Live Migration traffic between the offices. Which component should you install?

• A. the Multipath I/O feature
• B. the Routing role service
• C. the Network Controller server role
• D. the Canary Network Diagnostics feature
• E. the Data Center Bridging feature

Answer: CE

NEW QUESTION 18
Note: This question is part of a series of questions that use the same similar answer choices An answer choice may be correct for more than one question in the series Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question
You have a Hyper-V host named Server1 that runs Windows Server 2021 and a two-node scale-out file server cluster named Cluster1
A virtual machine named VM1 runs on Server1
You need to migrate the storage on VM1 to Cluster1 Which tool should you use?

• A. the clussvc.exe command
• B. the cluster.exe command
• C. the Computer Management console
• D. the configurehyperv.exe command
• E. the Disk Management console
• F. the Failover Cluster Manager console
• G. the Hyper-V Manager console
• H. the Server Manager Desktop app

Answer: G

NEW QUESTION 19
Note: This question is part of a series of questions that use the same similar answer choices An answer choice may be correct for more than one question in the series Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question
You have a two-node Hyper-V cluster named Cluster1 at a primary location and a stand-alone Hyper- V host named Server1 at a secondary location
A virtual machine named VM1 runs on Cluster1 You configure a Hyper-V Replica of VM1 to Server1 You need to perform a Test Fai lover of VM1. Which tool should you use?

• A. the clussvc.exe command
• B. the cluster.exe command
• C. the Computer Management console
• D. the configurehyperv.exe command
• E. the Disk Management console
• F. the Failover Cluster Manager console
• G. the Hyper-V Manager console
• H. the Server Manager Desktop app

Answer: G