we provide Validated Cisco 300 075 vce book which are the best for clearing 300 075 dump test, and to get certified by Cisco Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2). The 300 075 dump Questions & Answers covers all the knowledge points of the real 300 075 pdf exam. Crack your Cisco 300 075 vce Exam with latest dumps, guaranteed!
2026 New 300-075 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/300-075/
Q1. You are the Cisco Unified Communications Manager in Certpaper.com. You use a remote site MGCP gateway to provide redundancy when connectivity to the central Cisco Unified Communications Manager cluster is lost. How to enable IP phones to establish calls to the PSTN when they have registered with the gateway? (Choose three.)
A. POTS dial peers must be added to the gateway to route calls from the IP phones to the PSTN.
B. The default service must be enabled globally.
C. The command ccm-manager mgcp-fallback must be configured.
D. COR needs to be configured to disallow outbound calls.
Answer: A,B,C
Explanation:
Incorrect Answer: D Class of restriction: Cisco Unified Communications Manager Business Edition 3000 supports class of service (CoS) with respect to geographic reach as follows:
– Campus
– Local
– National
– International
– Emergency services
. Call waiting
. Default ringtones
. MoH
. Speed dials: Single-button, not BLF
Link: http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/vcallcon/ps11370/data_sheet_
c78-651909.html
Q2. A voice-mail product that supports only the G.711 codec is installed in headquarters.
Which action allows branch Cisco IP phones to function with voice mail while using only the G.729 codec over the WAN link to headquarters?
A. Configure Cisco Unified Communications Manager regions.
B. Configure transcoding within Cisco Unified Communications Manager.
C. Configure transcoding resources in Cisco IOS and assign to the MRGL of Cisco IP phones.
D. Configure transcoder resources in the branch Cisco IP phones.
Answer: C
Q3. Which Cisco IOS command is used for internal SAF Clients to check SAF learned routes?
A. show eigrp address-family ipv4 saf
B. show voice saf routes
C. show voice saf detail
D. show eigrp service-family ipv4 saf
E. show voice saf dndb all
Answer: E
Explanation:
Incorrect Answer: A, B, C, D Router# show voice saf dnDb all Total no. of patterns in db/max allowed : 1/6000 Patterns classified under dialplans (private/global) : 0/1 Informational/Error stats -Patterns w/ invalid expr detected while add : 0 Patterns duplicated under the same instance : 0 Patterns rejected overall due to max capacity : 0 Attempts to delete a pattern which is invalid : 0
Last successful DB update @ 2009:12:14 15:42:45:967 Link:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/feature/guide/SAF_FeatureModule.html#wp1202115
Q4. Where do you specify the device mobility group and physical location after they have been configured?
A. phones
B. DMI
C. device mobility CSS
D. device pool
E. MRGL
F. locale
Answer: D
Explanation:
Incorrect Answer: A, B, C, E Before you configure a device pool, you must configure the following items if you want to choose them for the device pool, Cisco Unified Communications Manager group (required), Date/time group (required). Region (required) , SRST reference (optional). Media resource group list (optional), Calling search space for auto-registration (optional). Reverted call focus priority (optional), Device mobility group (optional), Device mobility calling search space, Physical location (optional). Location, AAR group. AAR calling search space. Link:
https://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmcfg/b02devpl.ht ml
Q5. In a node-specific Service Advertisement Framework forwarder deployment model, what is the maximum number of Service Advertisement Framework forwarders that you can assign to a specific node?
A. 1
B. 2
C. 3
D. 4
E. 5
F. 6
Answer: B
Q6. What is the fastest way for an engineer to test the implementation of SRST in a production environment?
A. Shut down the Cisco Unified Communications Manager Servers.
B. Shut down the switch ports connected to the Cisco Unified Communications Manager Servers.
C. Add a null route to the publisher Cisco Unified Communications Manager at the remote router. Remove the null route when the operation is verified.
D. Unplug the IP phones from their switch ports.
E. Verification is not needed.
Answer: C
Q7. Refer to the exhibit.
Assume that NANP is being used and 9 is used for PSTN access code Long distance national calls are preceded with 1.
How should the HQ Cisco Unified Communications Manager be configured for calls to 3XXX to be sent to the gatekeeper at 1 0 1 6 1 with PSTN backups?
A. Configure a route pattern for 3XXX Assign this route pattern to a route list that points to two route groups The first route group contains the H 225 trunk The second route group contains the MGCP gateway with prefix digits 1 408555 for the outgoing called number.
B. Configure a route pattern for 1#3XXX Assign this route pattern to a route list that points to a route group that lists the H 225 trunk as first choice and the MGCP gateway as a second choice.
C. Configure a route pattern for 4085543XXX. Assign this route pattern to a route list that points to two route groups. The first route group contains the H 226 trunk The second route group contains MGCP gateway.
D. Configure a route pattern for 3XXX Assign this route pattern to a route list that points to two route groups The first route group contains the H 225 trunk The second route group contains MGCP gateway with prefix digits 91 408554 for the called number.
Answer: A
Explanation:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmcfg/b03rtgrp.html #wpxref46617
Q8. Scenario
There are two call control systems in this item. The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 9971 Video IP Phone. The Cisco VCS is controlling the SX20, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows.
Use the exhibits to answer the following questions.
SX20 System Information
DX650 Configuration
MRGL
DP
Locations
AARG
CSS
Movi Failure
Movi Settings
A new DX650 IP phone with MAC address D0C7.8914.132D, IP address is 172.18.32.119 has been added to the Cisco Unified Communications Manager, but is not registering properly.
What is causing this failure?
A. Device Pool cannot be default.
B. The DX650 is the incorrect calling search space.
C. The DX650 Phones does not support SIP.
D. The location Hub_None has not been activated.
E. The DX650’s MAC address is incorrect in the Cisco UCM.
Answer: E
Explanation:
From the screen capture below we can see that the DX650 phone’s MAC address was incorrectly entered as D0C78914131D, not D0C78914132D.
Q9. What happens if location-based CAC is used and there is no bandwidth available when a remote caller is placed on hold?
A. Cisco Unified Communications Manager sends TOH rather than MOH.
B. Cisco Unified Communications Manager terminates the call.
C. Cisco Unified Communications Manager plays default MOH.
D. Cisco Unified Communications Manager attempts to reconnect the call immediately.
Answer: A
Q10. What user profile is used to define the settings for a user on login?
A. Device Profile
B. Group Profile
C. Pool Profile
D. Specific Profile
Answer: A