We provide real 300 115 pdf exam questions and answers braindumps in two formats. Download PDF & Practice Tests. Pass Cisco 300 115 dumps Exam quickly & easily. The 300 115 switch pdf PDF type is available for reading and printing. You can print more and practice many times. With the help of our Cisco ccnp switch 300 115 dumps dumps pdf and vce product and material, you can easily pass the 300 115 dumps exam.


2026 New 300-115 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/300-115/

Q1. Which portion of AAA looks at what a user has access to?

A. authorization

B. authentication

C. accounting

D. auditing

Answer: A

Q2. Which switch feature prevents traffic on a LAN from being overwhelmed by continuous multicast or broadcast traffic?

A. storm control

B. port security

C. VTP pruning

D. VLAN trunking

Answer: A

Q3. Refer to the exhibit.

A multilayer switch has been configured to send and receive encapsulated and tagged frames. VLAN 2013 on the multilayer switch is configured as the native VLAN. Which option is the cause of the spanning-tree error?

A. VLAN spanning-tree in SW-2 is configured.

B. spanning-tree bpdu-filter is enabled.

C. 802.1q trunks are on both sides, both with native VLAN mismatch.

D. VLAN ID 1 should not be used for management traffic because its unsafe.

Answer: C

Q4. In which portion of the frame is the 802.1q header found?

A. within the Ethernet header

B. within the Ethernet payload

C. within the Ethernet FCS

D. within the Ethernet source MAC address

Answer: A

Q5. Refer to the exhibit.

Which set of configurations will result in all ports on both switches successfully bundling into an EtherChannel?

A. switch1

channel-group 1 mode active switch2

channel-group 1 mode auto

B. switch1

channel-group 1 mode desirable switch2

channel-group 1 mode passive

C. switch1

channel-group 1 mode on switch2

channel-group 1 mode auto

D. switch1

channel-group 1 mode desirable switch2

channel-group 1 mode auto

Answer: D

Q6. Pilot testing of the new switching infrastructure finds that when the root port is lost, STP immediately replaces the root port with an alternative root port. Which spanning-tree technology is used to accomplish backup root port selection?

A. PVST+

B. PortFast

C. BackboneFast

D. UplinkFast

E. Loop Guard

F. UDLD

Answer: D

Q7. A network engineer configured a fault-tolerance link on Gigabit Ethernet links G0/1, G0/2, G0/3, and G0/4 between two switches using Ethernet port-channel. Which action allows interface G0/1 to always actively forward traffic in the port-channel?

A. Configure G0/1 as half duplex and G0/2 as full duplex.

B. Configure LACP port-priority on G0/1 to 1.

C. Configure LACP port-priority on G0/1 to 65535.

D. LACP traffic goes through G0/4 because it is the highest interface ID.

Answer: B

Q8. Interface FastEthernet0/1 is configured as a trunk interface that allows all VLANs. This command is configured globally:

monitor session 2 filter vlan 1 - 8, 39, 52

What is the result of the implemented command?

A. All VLAN traffic is sent to the SPAN destination interface.

B. Traffic from VLAN 4 is not sent to the SPAN destination interface.

C. Filtering a trunked SPAN port effectively disables SPAN operations for all VLANs.

D. The trunk's native VLAN must be changed to something other than VLAN 1.

E. Traffic from VLANs 1 to 8, 39, and 52 is replicated to the SPAN destination port.

Answer: E

Q9. Which First Hop Redundancy Protocol is an IEEE Standard?

A. GLBP

B. HSRP

C. VRRP

D. OSPF

Answer: C

Q10. Which option is a possible cause for an errdisabled interface?

A. routing loop

B. cable unplugged

C. STP loop guard

D. security violation

Answer: D