Proper study guides for Improve Cisco Troubleshooting Cisco Data Center Unified Computing certified begins with Cisco 642-035 preparation products which designed to deliver the Tested 642-035 questions by making you pass the 642-035 test at your first time. Try the free 642-035 demo right now.


2026 New 642-035 Exam Dumps with PDF and VCE Free: https://www.surepassexam.com/642-035-exam-dumps.html

Q1. A customer is configuring a network control policy in a Cisco UCS domain. The network control policy configures the network control settings for the Cisco UCS domain, including which three of these? (Choose three.) 

A. how the VIF behaves if no uplink port is available in end-host mode 

B. the action that the Cisco UCS Manager takes on the remote Ethernet interface, vEthernet interface, or vFibreChannel interface when the associated border port fails 

C. Layer 2 switching on the fabric interconnect 

D. whether MAC registration occurs on a per-vNIC basis or for all VLANs 

E. the end-host mode setting on the I/O module 

Answer: ABD 

Q2. In a Cisco UCS environment, what are the three power types in a power policy? (Choose three.) 

A. backup 

B. grid 

C. redund 

D. n-plus-1 

E. non-redund 

F. plus-1 

Answer: BDE 

Q3. While updating firmware in a Cisco UCS environment, what will the Cisco UCS Manager do? 

A. show you all versions available on Cisco.com 

B. show you all versions downloaded to the Cisco UCS Manager 

C. show you only versions that are supported in your environment 

D. show you only versions that you selected to show 

E. show you old and new versions from your download 

Answer: C 

Q4. Refer to the exhibit. 

Which type of power policy is shown when referring to a Cisco UCS environment? 

A. chassis 

B. blade server 

C. fabric interconnect 

D. global 

E. switch 

Answer: D

Q5. How will the Cisco UCS Manager react when all of the FSM tasks fail? 

A. retries for 60 seconds 

B. raises faults and alarms 

C. restarts from the previous known good task 

D. sends an NOC SNMP trap email 

Answer: B 

Q6. During the installation of Windows 2008 64-bit operating system on a Cisco UCS server, the RAID controller is not found. What is the cause of the problem? 

A. The Cisco IMC firmware needs to be updated. 

B. The LSI option ROM needs to be configured by pressing Ctrl-H during post. 

C. The LSI drivers are not bundled and need to be loaded by clicking the Load Driver option to point to the correct drivers. 

D. Windows 2008 64-bit operating system is not supported on Cisco UCS servers. 

Answer: C 

Q7. What is the correct sequence to export tech support data from the Cisco IMC GUI interface? 

A. Admin tab > Utilities > Export Technical Support to TFTP 

B. Utilities tab > Utilities > Export Technical Support to TFTP 

C. Server tab > Utilities > Export Technical Support to TFTP 

D. Communications tab > Utilities > Export Technical Support to TFTP 

E. Support tab > Utilities > Export Technical Support to TFTP 

F. Help tab > Utilities > Export Technical Support to TFTP 

Answer: A 

Q8. You are attempting to install Microsoft Server 2008 R2 on a Fibre Channel LUN, but the installer does not see the LUN. You have used F6 to load the appropriate SCSI driver. What should your first troubleshooting step be? 

A. Email the SAN administrator to validate that your LUN is defined. 

B. Check the configuration of the vHBA in the service profile. 

C. Validate that the boot order is correct. 

D. Validate zoning on the Fibre Channel switch. 

E. Validate that the Fibre Channel uplink from the fabric interconnect is up. 

Answer: B 

Q9. Which of these does not have an FSM associated with it? 

A. vCenter connection 

B. service profile 

C. server hardware 

D. service profile templates 

Answer: D 

Q10. RBAC is a method of restricting access for a particular user on which two of these? (Choose two.) 

A. roles 

B. realm 

C. locales 

D. RADIUS 

E. LDAP 

Answer: AC