10 Tips For Most up-to-date 642-035 exam question

Q1. Refer to the exhibit. 

Which of these is an extension of the virtual machine abstraction that is applied to physical servers? 

A. service profile 

B. compute profile 

C. organization profile 

D. locale profile 

E. role profile 

View Answer

Q2. You are troubleshooting an FCoE boot issue on a Cisco UCS C220 M3 server with a VIC 1225 CNA. Which two pieces of information can you directly infer from the output of the show zone active command below? (Choose two.) 

zone name Server_1-to-Storage vsan 11 

pwwn 50:06:01:60:3b:a0:08:9f [Storage] 

*fcid 0x3b000b [pwwn 20:00:00:25:b5:04:0a:02] [C22_Server] 

A. The storage controller is not logged into the fabric. 

B. The server is not logged into the fabric. 

C. Only the storage controller is logged into the fabric. 

D. Only the server is logged into the fabric. 

E. The initiator and target cannot communicate because they are on the wrong VSAN. 

F. The WWPN of the storage controller is mistyped. 

G. The initiator and target cannot communicate because the zone name does not match the server name (C22_Server). 

View Answer

Q3. While attempting to boot a Cisco UCS server from SAN, you are unable to see the LUN. Which of these are causing the problem? (Choose three.) 

A. VHBA template 

B. RAID policy 

C. zoning 

D. LUN ID 

E. vACLs 

F. disjoint fabrics 

View Answer

Q4. A customer is configuring LAN pin groups in a Cisco UCS domain. The customer has two fabric interconnects and would like to associate the pin group with only one interconnect. Which statement about this configuration is true? 

A. In a system with two fabric interconnects, you can associate the pin group with only one fabric interconnect, and the other fabric interconnect will not be usable. 

B. In a system with two fabric interconnects, you can only associate the pin group with both fabric interconnects; you cannot associate the pin group with only one fabric interconnect. 

C. In a system with two fabric interconnects, you can associate the pin group with only one fabric interconnect or with both fabric interconnect. This is a supported configuration. 

D. This configuration is not supported in a Cisco UCS domain. 

View Answer

Q5. A customer is trying to boot an operating system that is installed on the eUSB on a Cisco UCS B-Series blade server; however, the boot fails. What is the cause of this failure? 

A. The local disk must be the first device in the boot order. 

B. eUSB is not a supported boot device. 

C. eUSB support is available only on the Cisco UCS C-Series rack server. 

D. eUSB is not the first device in the boot order for the server. 

View Answer

Q6. At any given time, each server can be associated with how many service profiles? 

A. 1 

B. 2 

C. 5 

D. 10 

E. unlimited 

View Answer

Q7. A customer is configuring the dynamic vNIC connection policy in a Cisco UCS domain. Why is the dynamic vNIC policy required? 

A. It is only required if you are configuring VM-FEX. 

B. It is only required if you are configuring Adapter-FEX. 

C. It is mainly for the Cisco UCS Manager to communicate with the fabric interconnect. 

D. It is required for Cisco UCS instances that include servers with VIC adapters on which you have installed VMs and configured dynamic vNICs. 

View Answer

Q8. Which command sequence in the Cisco UCS C-Series rack server CLI sends tech support data to a TFTP server? 

A. ucs-c250 / # scope cimc ucs-c250 /cimc # scope tech-support ucs-c250 /cimc/tech-support # set path default.tar.gz ucs-c250 /cimc/tech-support *# set tftp-ip 192.168.70.45 ucs-c250 /cimc/tech-support *# commit 

B. ucs-c250 / # scope system ucs-c250 /system # scope tech-support ucs-c250 /system/tech-support # set path default.tar.gz ucs-c250 /system/tech-support *# set tftp-ip 192.168.70.45 ucs-c250 /system/tech-support *# commit 

C. ucs-c250 / # scope support ucs-c250 /support # scope tech-support ucs-c250 /support/tech-support # set path default.tar.gz ucs-c250 /support/tech-support *# set tftp-ip 192.168.70.45 ucs-c250 /support/tech-support *# commit 

D. ucs-c250 / # scope fault ucs-c250 /fault # scope tech-support ucs-c250 /fault/tech-support # set path default.tar.gz ucs-c250 /fault/tech-support *# set tftp-ip 192.168.70.45 ucs-c250 /fault/tech-support *# commit 

View Answer

Q9. A customer is configuring SAN pin groups in a Cisco UCS domain. The customer notices that pinning is not working and traffic from the vHBA is not passing over the Fibre Channel uplink port. Which of these must be done for pinning to work correctly? 

A. Include the SAN pin group in a vHBA policy and then include the vHBA policy in the service profile that is assigned to that server. 

B. Include the SAN policy in the Cisco UCS Manager to match with pin groups on the fabric interconnect. 

C. The customer must have Cisco UCS Manager version 2.0 or above. 

D. Fibre Channel switch mode needs to be configured first. 

View Answer

Q10. During the installation of Windows 2008 64-bit operating system on a Cisco UCS server, the RAID controller is not found. What is the cause of the problem? 

A. The Cisco IMC firmware needs to be updated. 

B. The LSI option ROM needs to be configured by pressing Ctrl-H during post. 

C. The LSI drivers are not bundled and need to be loaded by clicking the Load Driver option to point to the correct drivers. 

D. Windows 2008 64-bit operating system is not supported on Cisco UCS servers. 

View Answer